인공관절의 무릎 굽힘 각도에 따른 완충재의 내구성에 관한 연구
A Study on the Durability of the Shock Absorber due to the Bending Angle of Knee at the Artificial Joint
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study investigates the wear degree of the shock absorber at the artificial knee joint due tobending degree of knee. As the stress distribution due to this angle is understood when the knee is bent,it can be shown how much and which configuration the wear of the shock absorber progresses in. Onthe basis of the analysis result, the stress applied at the shock absorber becomes higher and theequivalent stress becomes higher as the bending angle of knee is increased. The walking habit as theright attitude can be examined by applying the general joint as well as the artificial knee joint by usingthis study result.
Abstract
This study investigates the wear degree of the shock absorber at the artificial knee joint due tobending degree of knee. As the stress distribution due to this angle is understood when the knee is bent,it can be shown how much and which configuration the wear of the shock absorber progresses in. Onthe basis of the analysis result, the stress applied at the shock absorber becomes higher and theequivalent stress becomes higher as the bending angle of knee is increased. The walking habit as theright attitude can be examined by applying the general joint as well as the artificial knee joint by usingthis study result.
참고문헌 (9)
- Ali M. Alsamhan, "Rational Analysis of Human Artificial Knee Replacements", Engineering Science, 25, pp.49~54 (2013)
- S. Martelli, "Biomechanical robustness of a new proximal epiphyseal hip replacement to patient variability and surgical uncertainties : A FE study", Medical Engineering & Physics, 34, pp.161~171 (2012)
- M. S. A. Megat Ali, "A Preliminary Study: Finite Element Analysis of an Artificial Knee Implant Design", 2010 IEEE Symposium on Industrial Electronics and Applications, pp.395~400 (2010)
- 최해규, "알루미늄 폼으로 된 DCB 모델의 피로해석에 관한 연구", 한국기계기술학회지, 14(6), pp.39~43 (2012), 한국기계기술학회
- Linlin Zhang, "Finite Element Analysis of the Contact Interface Between Trans-femoral Stump and Prosthetic Socket", 5th Annual International Conference of the IEEE EMBS Osaka, pp.1270~1273 (2013)
- Chandreshwar Raoa, "A statistical finite element model of the knee accounting for shape and alignment variability", Medical Engineering & Physics, 35, pp.1450~1456 (2013)
- 양현수, "CF", Epoxy 복합재 적층쉘의 항공기 부재 충격특성에 관한 연구, 2012, pp.14(6), 17~24[DOI]
- J. H. Lee, "Structural Analysis on Crack Propagation in Structural Steel", Transactions of the Korean Society Mechanical Engineers (2013)
- H. Wang, "Image based weighted center of proximity versus directly measured knee contact location during simulated gait", Journal of Biomechanics, 47, pp.2483~2489 (2014)