엔진 폭발하중을 고려한 커넥팅로드의 좌굴해석에 관한 연구
A Study on buckling analysis of connecting rod under engine firing load
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
When a engine connecting rod is designed, it’s important to consider the buckling strength as well as deformation and durability of the rod. The buckling strength of a rod is mainly affected by the shape and area of shank cross-section and boundary conditions of its small and big ends. Buckling analysis by finite element method was carried out to evaluate the elastic buckling strength of a connecting rod that has non-uniform cross section areas. And the Merchant-Rankine formula was applied to predict the inelastic critical buckling load by considering the plastic buckling strength. Finally, the maximum allowable compressive load, which has 56.57kN, was predicted by considering the 1.7 buckling safety factor. It represents an approximately 40% greater than the maximum firing pressure.
Abstract
When a engine connecting rod is designed, it’s important to consider the buckling strength as well as deformation and durability of the rod. The buckling strength of a rod is mainly affected by the shape and area of shank cross-section and boundary conditions of its small and big ends. Buckling analysis by finite element method was carried out to evaluate the elastic buckling strength of a connecting rod that has non-uniform cross section areas. And the Merchant-Rankine formula was applied to predict the inelastic critical buckling load by considering the plastic buckling strength. Finally, the maximum allowable compressive load, which has 56.57kN, was predicted by considering the 1.7 buckling safety factor. It represents an approximately 40% greater than the maximum firing pressure.
참고문헌 (9)
- N.P.Doshi, "Analysis of Connecting Rod Using Analytical and Finite Element Method", International Journal of Modern Engineering Research, 3(1), pp.65~68 (2013)
- M. Gere,, "Mechanics of Materials 2nd ed", pp.1984, Brooks
- D. Allen, "Merchant-Rankine Approach to Member Stability", Journal of Structural Division, 104(2), pp.1909~1914 (1978)
- M. K. Lee, "Buckling Sensitivity of a Connecting Rod to the Shank Sectional Area", Materials & Design, 31(6), pp.2796~2803 (2010)
- Altair Engineering, Inc., "Altair Hyperworks 13.0", ~ (2014)
- ABAQUS, Inc., "ABAQUS Analysis User's Manual. Ver. 6.13", ~ (2014)
- 안기원, "유연 다물체 동력학모델을 이용한 크랭크트레인 동응력 해석", 한국기계기술학회지, 12(4), pp.67~74 (2010), 한국기계기술학회
- 조재웅, "불규칙 피로 하중을 받는 자동차의 컨트롤 암의 구조 해석", 한국기계기술학회지, 13(3), pp.87~92 (2011), 한국기계기술학회
- Connecting Rod Buckling Analysis Using Eigenvalue and Explicit Methods, "Anderson, A.", SAE, ~, pp.Technical Paper 2012-32-0102 (2012)