비보강 재료의 사출성형에 있어서 사출성형품의 리브 설계가 휨에 미치는 영향
Influences of Injection Molded Part for Various Rib Design On The Warpage during Injection Molding of Non Reinforced Resins
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Molding trouble in injection-molded parts is caused by change of complexed molding product and molding process condition, etc. Warpage, which is one of the molding trouble, acts as possible factor which results in defect in assembly. In this study, a mold was designed to produce specimens with rib parallel to flow direction, specimens with rib perpendicular to flow direction and specimens without rib. This work researched change of warpage according to injection molding condition such as packing pressure, packing time, resin temperature in crystalline polymers(PP). Flat shape with ribs showed higher warpage than flat shape without ribs. The Specimens with ribs that are located perpendicular to the flow direction.
Abstract
Molding trouble in injection-molded parts is caused by change of complexed molding product and molding process condition, etc. Warpage, which is one of the molding trouble, acts as possible factor which results in defect in assembly. In this study, a mold was designed to produce specimens with rib parallel to flow direction, specimens with rib perpendicular to flow direction and specimens without rib. This work researched change of warpage according to injection molding condition such as packing pressure, packing time, resin temperature in crystalline polymers(PP). Flat shape with ribs showed higher warpage than flat shape without ribs. The Specimens with ribs that are located perpendicular to the flow direction.
참고문헌 (15)
- 류미라, "다구찌 기법을 이용한 베벨기어 사출금형의 최적화", 한국기계기술학회지, 12(3), pp.91~96 (2010), 한국기계기술학회
- 이민, "수지의 종류와 사출성형품의 리브 설계가 휨에 미치는 영향", 한국기계기술학회지, 14(2), pp.59~65 (2012), 한국기계기술학회[DOI]
- Dimensional Stability of Thermoplastic Parts : Model Experiments, "A. J. Poslinski", ANTEC, 486~490 (1996)
- Dimensional Stability of Thermoplastic Parts : Comparison of Shrinkage Data With Predictions, "W. C. Bushko", ANTEC, 491~495 (1996)
- Dimensional Stability of Thermoplastic Parts : Modeling Issues, "W. C. Bushko", ANTEC, 482~485 (1996)
- The Effects of Filler, Wall Thickness and Geometry on Shrinkage and Warpage of Engineering Plastics, "Joshua E. Mcllvaine", LNP, 179~191 (1998)
- K. M. B Jansen, "Warpage of Injection Moulded Plates and Corner Products", Intern. Polymer Processing, (13), pp.417~424 (1998)
- K. M. B. Jansen, "Experimental Validation of Shrinkage Predictions for Injection Molded Products", Intern. Polymer Processing, (13), pp.99~104 (1998)
- James T. Wang, "CAE and Related Innovations for Polymer Processing", pp.163~174 (2000)
- J. Gosden, "How to Avoid Warpage in polypropylene moulding", pp.3~ (1992)
- Matsuoka, T., "Integrated Simulation to Predict Warpage of Injection Molded Parts", Polymer Engineering and Science, 31(14), pp.1043~1050 (1991)
- H. Wang, "Numerical and Experimental Studies on the Ejection of Injection-Molded Plastic Products", Polymer Engineering and Science, 40(3), pp.826~840 (2000)
- S. Han, "Shrinkage Prediction For Slowly-Crystallizing Thermoplastic Polymers in Injection Molding", Inter. Polymer Processing, (12), pp.228~237 (1997)
- Shrinkage and Filling of UTRRA-HIGH Molecular Weight Polyethylene(UHMWPE), "N. Saha", ANTEC, 1599~1602 (1993)
- 이민, "유리섬유로 보강된 수지에서 제품설계 및 성형조건에 따른 휨의 연구: Part 1. 비결정성 수지", 폴리머, 36(5), pp.555~563 (2012), 한국고분자학회[DOI]