유한요소해석법을 이용한 자유곡면 반사경의 조립부 형상에 따른 초정밀 가공 특성
Ultra-Precision Machining Characteristic for Mounting Structure of Freeform Mirror using Finite Element Analysis
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Demand for precision optical system is increased due to the rapid development of aerospace, defense, and imaging fields. Research to produce high precision reflector mirror is being carried out. In particular, confocal off-axis reflecting optical system can be applied to various fields due to the advantage of beingable to implement a short focal length and a large field of view. The axis of freeform reflector is asymmetrical, so ultra precision machining which is possible to accurately controls over three-axis is required for the reflector. Precision machining of free-form reflectors is more difficult than precision machining of symmetrical reflector. In this study, effect of mirror mounting structure on cutting characteristics was researched by finite element analysis(FEA) to set the reference plane using the machining and measurement of the freeform mirror. The mirror mounting has been divided into four types of squares, hexagons, octagons, and dodecagon. This study of FEA shows that there are not much difference in stress on the surface of the mirror for rotating and cutting forces. It was confirmed that deflection have great different over 5 times according to mounting structure. The analysis results are expected to be useful in the assembly part design and production to minimize the manufacturing tolerances of the freeform mirror.
Abstract
Demand for precision optical system is increased due to the rapid development of aerospace, defense, and imaging fields. Research to produce high precision reflector mirror is being carried out. In particular, confocal off-axis reflecting optical system can be applied to various fields due to the advantage of beingable to implement a short focal length and a large field of view. The axis of freeform reflector is asymmetrical, so ultra precision machining which is possible to accurately controls over three-axis is required for the reflector. Precision machining of free-form reflectors is more difficult than precision machining of symmetrical reflector. In this study, effect of mirror mounting structure on cutting characteristics was researched by finite element analysis(FEA) to set the reference plane using the machining and measurement of the freeform mirror. The mirror mounting has been divided into four types of squares, hexagons, octagons, and dodecagon. This study of FEA shows that there are not much difference in stress on the surface of the mirror for rotating and cutting forces. It was confirmed that deflection have great different over 5 times according to mounting structure. The analysis results are expected to be useful in the assembly part design and production to minimize the manufacturing tolerances of the freeform mirror.
참고문헌 (18)
- S. C. Yang, "The technique of ultra precision machining of infrared optical-system for space", Journal of Korean Society for Precision Engineering, 24(2), pp.19~24 (2005)
- 양순철, "적외선 카메라용 반사경의 초정밀 절삭특성에 관한 연구", 한국정밀공학회지, 23(5), pp.44~50 (2006), 한국정밀공학회
- S. C. Yang, "Ultra Precision Machining Technology of Infrared Optical System for Aerospace", Journal of the Korean Society for Precision Engineering, 24(2), pp.19~24 (2007)
- 양순철, "Infrared 광학초자의 초정밀 가공 특성", 한국정밀공학회지, 29(3), pp.253~260 (2012), 한국정밀공학회
- 이상용, "유한요소해석법을 이용한 고정밀 반사경의 구조 해석", 비파괴검사학회지, 33(2), pp.154~159 (2013), 한국비파괴검사학회[DOI]
- S. Chang, "Geometrical theory of aberrations for classical offset reflector antennas and telescopes", 박사, pp.2003
- S. Chang, "Off-axis reflecting telescope with axially-symmetric optical property and its applications", SPIE Proceedings, 6265, pp.626548~ (2006)
- S. Chang, "Geometrical theory of aberrations near the axis in classical off-axis reflecting telescopes", Journal of the Optical Society of America A, 22(11), pp.2454~2464 (2005)
- 이대희, "우주탑재용 적외선카메라 시험모델의 광학계 설계", Journal of Astronomy and Space Sciences, 22(4), pp.473~482 (2005), 한국우주과학회
- I.-S. Yuk, "Preliminary optical design of MIRIS, main payload of STSAT-3", Publications of Korean Astronomical Society, 22(4), pp.201~209 (2007)
- C. Park, "Design and early performance of IGRINS (immersion grating infrared spectrometer)", SPIE Proceedings, 9147 (2014)
- Y. H. Lee, "Alignment of an off-axis parabolic mirror with two parallel He-Ne laser beams", Optical Engineering, 31(11), pp.2287~2292 (1992)
- F. Z. Fang, "Manufacturing and measurement of freeform optics", CIRP Annals Manufacturing Technology, 62(2), pp.823~846 (2013)
- C. J. Evans, "Structured, textured or engineered surfaces", CIRP Annals Manufacturing Technology, 48(2), pp.541~556 (1999)
- K. Garrard, "Design tools for freeform optics", SPIE Proceedings, 5874, pp.95~105 (2005)
- 오재국, "광통신용 비구면 렌즈의 금형 코어 가공 및 해석에 관한 연구", 한국기계기술학회지, 15(2), pp.305~310 (2013), 한국기계기술학회
- 김상혁, "PROTO-MODEL OF AN INFRARED WIDE-FIELD OFF-AXIS TELESCOPE", Journal of the Korean Astronomical Society, 43(5), pp.169~181 (2010), 한국천문학회
- 김성수, "응답해석을 활용한 IR 냉각기 장착구조 설계", 한국기계기술학회지, 17(1), pp.145~151 (2015), 한국기계기술학회