A6451 알루미늄 및 용융아연도금강판의 클린칭 접합특성 및 접합기술의 차체 부품 적용 연구
A Study on Clinching Characteristics for A6451 Aluminum and Galvanized Steels and the Application of Clinching Technology to Automotive Parts
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, clinching characteristics of aluminum and galvanized steels were investigated for the application of clinching as a joining technique to aluminum wheelhouse assembly. A6451 aluminium alloy and galvanized steel sheets were joined by hybrid joining(clinching + adhesive bonding). Tensile-shear load and fracture mode of hybrid joints were investigated. Maximum tensile-shear load of hybrid joints was about six times higher than that of clinched joints without adhesive. Energy absorption values of hybrid joints were higher than those of clinched joints without adhesive as well as resistance spot welded steel joints. Developed aluminum wheelhouse assembly showed higher static stiffness than the existing steel parts. Aluminum wheelhouse inner panel unit was 44% lighter than the steel unit, and the final assembled aluminum wheelhouse was 14.6% lighter than the existing steel parts.
Abstract
In this study, clinching characteristics of aluminum and galvanized steels were investigated for the application of clinching as a joining technique to aluminum wheelhouse assembly. A6451 aluminium alloy and galvanized steel sheets were joined by hybrid joining(clinching + adhesive bonding). Tensile-shear load and fracture mode of hybrid joints were investigated. Maximum tensile-shear load of hybrid joints was about six times higher than that of clinched joints without adhesive. Energy absorption values of hybrid joints were higher than those of clinched joints without adhesive as well as resistance spot welded steel joints. Developed aluminum wheelhouse assembly showed higher static stiffness than the existing steel parts. Aluminum wheelhouse inner panel unit was 44% lighter than the steel unit, and the final assembled aluminum wheelhouse was 14.6% lighter than the existing steel parts.
참고문헌 (12)
- K-I Mori, "A review on mechanical joining of aluminium and high strength steel sheets by plastic deformation", International Journal of Lightweight Materials and Manufacture, 1, pp.1~11 (2018)
- 권의표, "알루미늄 및 용융아연도금강판의 다겹 Self-Piercing Rivet 접합특성에 관한 연구", 한국기계기술학회지, 20(3), pp.287~293 (2018), 한국기계기술학회[DOI]
- 김용, "차체 소재 다변화에 따른 체결 및 접합기술", 대한용접접합학회지, 33(3), pp.12~18 (2015), 대한용접접합학회
- L. Kascak, "Mechanical joining methods in car body construction", Transfer Inovacii, 28, pp.168~171 (2013)
- 김영곤, "자동차용 고강도강의 마찰교반접합특성에 미치는 접합 변수의 영향", 한국기계기술학회지, 17(2), pp.267~272 (2015), 한국기계기술학회[DOI]
- 최철영, "접착제 경화시점에 따른 하이브리드 접합 파단모드 및 접합강도 평가", 대한용접접합학회지, 29(6), pp.669~675 (2011), 대한용접접합학회
- L. Calabrese, "Durability of hybrid clinchbonded steel", aluminum joints in salt spray environment, 2016, pp.87, 3137~3147
- 배진희, "Self-Piercing Rivet과 Hybrid Joining을 이용한 자동차용 선도장 칼라강판과 용융아연도금강판의 접합부 기계적 성질 평가", 대한용접접합학회지, 34(1), pp.59~67 (2016), 대한용접접합학회
- 이혜림, "차체 구조용 에폭시 접착제의 접합강도에 미치는 나노 기능성 블록공중합체 첨가의 영향", 대한용접접합학회지, 33(4), pp.44~49 (2015), 대한용접접합학회
- 최두열, "자동차용 강재의 접합기술 동향", 대한용접접합학회지, 27(2), pp.7~12 (2009), 대한용접접합학회
- 황인성, "전극 형상에 따른 저비중 경량강판의 저항 점 용접 특성", 대한용접접합학회지, 35(2), pp.52~57 (2017), 대한용접접합학회[DOI]
- 박상순, "인장전단시험을 이용한 TRIP1180강의 계면파단특성 평가", 대한용접접합학회지, 26(6), pp.81~91 (2008), 대한용접접합학회