A study on the effects of self-piercing riveting methods on the joint
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
As the regulations on exhaust gas strengthened, the research and development of devices to reduce air pollutants emitted from vehicles have continued. Lightweight design that influences the fuel efficiency of vehicles has become an essential consideration due to the use of exhaust gas reduction systems. The early lightweight design started as a concept of replacing steel materials with aluminum or ultrahigh tensile steel. However, bi-metals with high strength and light weight are now being designed and developed instead of single materials. For bonding of bi-metal sheets, the self-piercing riveting method is being generally applied to double sheets with an upper high-tensile steel plate and a lower aluminum alloy plate. However, there is insufficient research to solve the problem of the costs of power consumption and consumable parts and low bonding strength of the joint due to the potential corrosion of parts that occur in the rivet joint. This study proposed a new self-piercing riveting method after punching (SPRP) method that can prevent the reduction of bonding force of the rivet joint and minimize the stress and forming load required for bonding. Furthermore, the possibility of rivet bonding with corrosion resistance and bonding force was proved through experiment and analysis.
Abstract
As the regulations on exhaust gas strengthened, the research and development of devices to reduce air pollutants emitted from vehicles have continued. Lightweight design that influences the fuel efficiency of vehicles has become an essential consideration due to the use of exhaust gas reduction systems. The early lightweight design started as a concept of replacing steel materials with aluminum or ultrahigh tensile steel. However, bi-metals with high strength and light weight are now being designed and developed instead of single materials. For bonding of bi-metal sheets, the self-piercing riveting method is being generally applied to double sheets with an upper high-tensile steel plate and a lower aluminum alloy plate. However, there is insufficient research to solve the problem of the costs of power consumption and consumable parts and low bonding strength of the joint due to the potential corrosion of parts that occur in the rivet joint. This study proposed a new self-piercing riveting method after punching (SPRP) method that can prevent the reduction of bonding force of the rivet joint and minimize the stress and forming load required for bonding. Furthermore, the possibility of rivet bonding with corrosion resistance and bonding force was proved through experiment and analysis.
참고문헌 (15)
- M. Lou, "Behavior and quality evaluation of electroplastic self-piercing riveting of aluminum alloy and advanced high strength steel", Journal of Manufacturing Science and Engineering, 135(1), pp.011005~ (2013)
- A. Gay, "Fatigue performance of a self-piercing rivet joint between aluminum and glass fiber reinforced thermoplastic composite", International Journal of Fatigue, 83(part 2), pp.127~134 (2016)
- H. Q. Ang, "An overview of self-piercing riveting process with focus on joint failures, corrosion issues and optimization techniques", Chinese Journal of Mechanical Engineering, 34(2), pp.1~25 (2021)
- K. Mori, "Mechanism of superiority of fatigue strength for aluminum alloy sheets joined by mechanical clinching and self-piercing rivet", 212(9), pp.1900~1905 (2012)
- M. Reinstettel, "Laboruntersuchung zur Prozessstabilität beim NietClinchen (Investigation of Process Stability of Rivet-Clinching)", Ph. D, Department of Mechanical Engineering, pp.2007
- 최홍석, "Effect of clearance and inclined angle on sheared edge and tool failure in trimming of DP980 sheet", Journal of Mechanical Science and Technology, 28(6), pp.2319~2328 (2014), 대한기계학회
- S. Thipprakmas, "An investigation of step taper-shaped punch in piercing process using finite element method", Journal of Materials Processing Technology, 197(1-3), pp.132~139 (2008)
- N. Hatanaka, "Finite element simulation of the shearing mechanism in the blanking of sheet metal", Journal of Materials Processing Technology, 139(1-3), pp.64~70 (2003)
- Y. D. Chung, "Friction Stir Welding of Hypereutectoid Steel (SK5) blow eutectoid temperature", Science and Technology of Welding and Joining, 14(3), pp.233~238 (2009)
- 길민규, "알루미늄, 마그네슘과 구리합금의 비정형롤판재성형 공정 적용성 비교에 관한 연구", 소성∙가공, 26(3), pp.168~173 (2017), 한국소성∙가공학회[DOI]
- Y. Zhou, "Evaluation of opening-hole shapes for rivet connection of a composite plate", Journal of Mechanical Engineering Science, 231(20), pp.3810~3817 (2017)
- N. H. Hoang, "Self-piercing riveting connections using aluminium rivets", International Journal of Solids and Structures, 47(3-4), pp.427~439 (2010)
- 정택언, "Aluminum", Steel 이종소재 접합의 모재강도 및 두께별 SPR 접합성에 관한 연구, 2019, pp.37(3), 212~219[DOI]
- B. Uhe, "Improvement of a rivet geometry for the self-piercing riveting of high strength steel and multi material joints", Production Engineering, 14, pp.417~423 (2020)
- K. Martinsen, "Joining of dissimilar materials", CIRP Annals, 64(2), pp.679~699 (2015)