백연저감 열교환 시스템의 급기 열유동 특성에 대한 연구
Study on Supply Air Heat Flow Characteristics of White Heat Reduction Heat Exchange System
3
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, the characteristics of the heat flow on SA(supply air) side of the white smoke reducing heat exchange system according to the change of SA velocity were analyzed in the winter condition (outside temperature 0℃). Also, the mixing process of SA and the EA(exhaust air) is presented in the psychrometric chart to confirm the possibility of reducing white smoke. Solidworks flow simulation was used to analyze the heat flow on the heat exchange system under uniform conditions. As the inflow velocity of SA increased, the temperature of SA decreased due to the convective heat transfer improvement due to the active flow in SA system. And the outlet temperature and absolute humidity of the mixing zone decreased significantly. At SA velocity 7 m/s, the outlet temperature and absolute humidity decreased to about 58% and 82%, respectively.
Abstract
In this study, the characteristics of the heat flow on SA(supply air) side of the white smoke reducing heat exchange system according to the change of SA velocity were analyzed in the winter condition (outside temperature 0℃). Also, the mixing process of SA and the EA(exhaust air) is presented in the psychrometric chart to confirm the possibility of reducing white smoke. Solidworks flow simulation was used to analyze the heat flow on the heat exchange system under uniform conditions. As the inflow velocity of SA increased, the temperature of SA decreased due to the convective heat transfer improvement due to the active flow in SA system. And the outlet temperature and absolute humidity of the mixing zone decreased significantly. At SA velocity 7 m/s, the outlet temperature and absolute humidity decreased to about 58% and 82%, respectively.
참고문헌 (6)
- Cho, G. H., "Technological trend of white smoke reduction system", Korea Academia-Industrial cooperation Society Spring Conference paper, pp.769~701 (2017)
- Campbell, J. C, "The prevention of fog from cooling towers", Annual Meeting of the Cooling Tower Institute (1976)
- 김병조, "건식 열교환기를 이용한 백연방지 냉각탑 성능의 수치해석적 연구", 설비공학 논문집, 15(12), pp.1018~1027 (2003), 대한설비공학회
- S. Y. Jeong, "An experimental study on the cooling tower plume prevention optimal design and performance improvements", Proceeding of the KSME Winter Annual Conference, pp.3705~3708 (2015)
- S. D. Kim, "Numerical Analysis of Thermal Flow for Materials of Combined Weapon System in Large Environmental Tester", Spring and Autumn Conference of the Korean Society of Mechanical Engineers, pp.3281~3286 (2007)
- Dassault Systems Solidworks Co., "Solidworks Flow Simulation Manual", ~ (2016)