전산 해석을 활용한 형상에 따른 가스발생기점화기 럽처디스크의 파단 분석
Fracture Analysis of Gas Generating Igniter Rupture Disk According to Shape using CAE Simulation
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In turbopump type liquid rocket engines, ignition and starting are known to be the most unstable and risky section among all operating sections of the projectile. The operation of the liquid rocket engine is the process of ignition and combustion of the main combustor after the turbo pump is driven into a stable section due to the turbine driving of the turbo pump and the ignition and combustion of the gas generator by the pyro starter. In this process, the driving of related components directly influences each other, so each component must be operated with sufficient reliability. In particular, if the igniter does not supply sufficient ignition energy at a predetermined time, an explosion may occur due to stagnation of the fuel/oxidant mixture, so reliability is more important. In this study, the fracture analysis of the gas generator igniter rupture disk according to the shape was performed using computational analysis. As a result, comparative analysis was performed to obtain the optimal dimensions according to each variable condition.
Abstract
In turbopump type liquid rocket engines, ignition and starting are known to be the most unstable and risky section among all operating sections of the projectile. The operation of the liquid rocket engine is the process of ignition and combustion of the main combustor after the turbo pump is driven into a stable section due to the turbine driving of the turbo pump and the ignition and combustion of the gas generator by the pyro starter. In this process, the driving of related components directly influences each other, so each component must be operated with sufficient reliability. In particular, if the igniter does not supply sufficient ignition energy at a predetermined time, an explosion may occur due to stagnation of the fuel/oxidant mixture, so reliability is more important. In this study, the fracture analysis of the gas generator igniter rupture disk according to the shape was performed using computational analysis. As a result, comparative analysis was performed to obtain the optimal dimensions according to each variable condition.
참고문헌 (10)
- 이기수, "내연기관 밸브의 동적 접촉 및 응력 해석", 한국자동차공학회 논문집, 10(2) (2002), 한국자동차공학회
- 김명진, "N2O 플라즈마 점화 하이브리드 로켓에 대한 실험적 연구", 한국추진공학회지, 23(3), pp.1~8 (2019), 한국추진공학회[DOI]
- Report on alternative devices to pyrotechnics on spacecraf, "MH, Lucy", ~ (1996)
- J. Yang, "Impact Stress Field Simulation on Solenoid Valve during the Impulsive Load", Applied mechanics and materials, 16, pp.530~534 (2009)
- 강신한, "PFA 라이닝 플러그 밸브 설계를 위한 밸브 본체의 응력 시뮬레이션", 한국산학기술학회논문지, 10(3), pp.500~506 (2009), 한국산학기술학회
- X, Z, Wang, "Coupling Effect of Temperature Stress in Butterfly Valve Mechanical System Based of Fluent Numerical Simulation", Applied mechanics and materials, 716, pp.702~706 (2014)
- 김청균, "유한요소법을 이용한 알람밸브의 응력 및 변형거동에 관한 연구", 한국가스학회지, 16(2), pp.14~17 (2012), 한국가스학회[DOI]
- 강대희, "3-way 초고압 밸브의 유로제어를 위한 니플 파단 특성에 관한 연구", 한국기계기술학회지, 20(6), pp.865~871 (2018), 한국기계기술학회[DOI]
- 이태근, "스풀밸브의 노치형상에 따른 유동 특성에 관한 연구", 한국기계기술학회지, 18(4), pp.489~496 (2016), 한국기계기술학회[DOI]
- 허전, "바이패스용 3-Way 밸브를 장착한 온수 난방시스템의 압력 및 유량 특성 평가", 설비공학 논문집, 19(3), pp.269~274 (2007), 대한설비공학회