축대칭 등가 모델을 활용한 터빈 휠의 퓨즈 섹션부 파손 속도 예측
Prediction of Burst Speed on the Fuse Section of Turbine Wheel Using Equivalent Axisymmetric Model
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The turbine wheel plays a crucial role in operating turbines, and with recent advancements in technology, the performance requirements for turbine wheels have significantly increased. Consequently, it is essential to predict failure speeds, as turbine wheels must maintain high stability and reliability under harsh operating conditions. In this study, only the centrifugal loads generated by rotati were considered, excluding conditions such as temperature and pressure. A round-shaped fuse section was applied to the turbine wheel, and the stresses induced by variations in shape were analyzed to predict failure speeds. The results obtained using the Hallinan criteria were compared with the results from finite element analysis (FEA) to validate the predicted failure speeds, showing good agreement between the two methods.
Abstract
The turbine wheel plays a crucial role in operating turbines, and with recent advancements in technology, the performance requirements for turbine wheels have significantly increased. Consequently, it is essential to predict failure speeds, as turbine wheels must maintain high stability and reliability under harsh operating conditions. In this study, only the centrifugal loads generated by rotati were considered, excluding conditions such as temperature and pressure. A round-shaped fuse section was applied to the turbine wheel, and the stresses induced by variations in shape were analyzed to predict failure speeds. The results obtained using the Hallinan criteria were compared with the results from finite element analysis (FEA) to validate the predicted failure speeds, showing good agreement between the two methods.
참고문헌 (13)
- Maruthi B H, "Finite Element Formulation for Prediction of Over-speedand burst-margin limits in Aero-engine disc", International Journal of Soft Computing and Engineering, 2(3), pp.172~176 (2012)
- Nicola Squarcella, "The importance of the material properties on the burst speed of turbine disks for aeronautical applications", International Journal of Mechanical Sciences, 84, pp.73~83 (2014)
- Yue Guo, "Design optimization and burst speed prediction of a Ti2AlNb blisk", International Journal of Aerospace Engineering, 2021 (2021)
- Paul Copp, "Application of probabilistic methods to turbine engine disk life prediction and risk assessment", Research on Intelligent Manufacturing and Assembly, 1(1), pp.3~19 (2022)
- Yu-Huai Xie, "Burst speed prediction and reliability assessment of turbine disks : Experiments and probabilistic aspects", Engineering Failure Analysis, 145, pp.1~16 (2023)
- Masahiro SHIKIDA, "A Study on High-speed Disk Bursting Strength", Bulletin of the JSME, 23(181), pp.1035~1042 (1980)
- ABAQUS, Inc, "ABAQUS Analysis User's Manual Vol. III : Materials. Ver. 6.5", ~ (2004)
- K. H. Kim, "Study on Turbine Disk Burst Speed Evaluation Method", Transactions of KSFM, 7, pp.50~54 (2019)
- An Improved turbine disk design to increases reliability of aircraft jet engines, "W. N. Barack", NASA, ~, pp.NASA CR-135033 (1976)
- Metals and alloys for cryogenic application-A Review, "E. G. Kendall", Commander Systems Division, United States Air Force, ~ (1964)
- I. C. Baek, "A Study on the optimum shape of gas turbine disks by burst margin analysis for each designs", Transactions of KSFM, 11, pp.220~222 (2019)
- D. H. Kang, "Fracture Analysis of Gas Generating Igniter Rupture Disk According to Shape using CAE Simulation", J. of Korean Soc. Mec. Technol, 22(6), pp.1075~1080 (2020)
- H. J. Lee, "Optimal Structural Desing of Rupture Disk using Design of Experiments", J. of Korean Soc. Mec. Technol, 26(1), pp.119~126 (2024)