전동킥보드 서스펜션 내구성 강화를 위한 구조해석
Structural Analysis for Strengthening the Durability of Electric Kickboard Suspension
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the models with types A, B and C of the commercial electric kickboard suspensions were modeled and the structural analyses were carried out. Types A and C have the deformations less than type B. The coil spring can reduce the deformation by installing the suspension. In types A and C, the forces applied to the bolt became same, but more deformation occurred in type C. This is the difference due to whether or not there is a fixed part. Type A was fixed and type C not. This fixation indicates that the bolt has been fully tightened to the end. Therefore, the use of products thatarefully contacted to the end by tightening with bolts can reduce the deformation greatly. Based on the data obtained from this study, it is assumed that the more efficient and stable product will be designed if the suspension absorber of the suspension is designed. Without the test on the durability of electric kickboard suspension, the durability can be seen as the deformation and stress are investigated through the structural analysis.
Abstract
In this study, the models with types A, B and C of the commercial electric kickboard suspensions were modeled and the structural analyses were carried out. Types A and C have the deformations less than type B. The coil spring can reduce the deformation by installing the suspension. In types A and C, the forces applied to the bolt became same, but more deformation occurred in type C. This is the difference due to whether or not there is a fixed part. Type A was fixed and type C not. This fixation indicates that the bolt has been fully tightened to the end. Therefore, the use of products thatarefully contacted to the end by tightening with bolts can reduce the deformation greatly. Based on the data obtained from this study, it is assumed that the more efficient and stable product will be designed if the suspension absorber of the suspension is designed. Without the test on the durability of electric kickboard suspension, the durability can be seen as the deformation and stress are investigated through the structural analysis.
참고문헌 (8)
- 이동훈, "CFRP로 제작된 적층각도를 가진 TDCB 구조물에서의 접착부의 파손에 관한 융합 연구", 한국융합학회논문지, 9(12), pp.175~180 (2018), 한국융합학회[DOI]
- 이정호, "보행 기구 높이에 따른 구조해석을 통한 융합 기술연구", 한국융합학회논문지, 6(2), pp.19~24 (2015), 한국융합학회[DOI]
- 최계광, "자전거 프레임 버티드 형상에 따른 내구성 해석을 통한 융합연구", 한국융합학회논문지, 9(11), pp.271~276 (2018), 한국융합학회[DOI]
- 정윤수, "4C의 MM Optical Fiber를 수용 가능한 Fiber Guide의 구조해석", 한국기계가공학회지, 16(6), pp.75~80 (2017), 한국기계가공학회[DOI]
- 조승제, "타워크레인 선회감속기용 유성기어 캐리어의 구조해석", 한국기계가공학회지, 13(5), pp.1~7 (2014), 한국기계가공학회[DOI]
- 고종현, "승용차량 리어도어의 강도 및 피로에 대한 CAE해석", 한국기계가공학회지, 13(3), pp.63~69 (2014), 한국기계가공학회[DOI]
- 박장우, "제작 오차를 고려한 트랙터 캐빈의 구조 해석", 한국융합학회논문지, 8(5), pp.155~160 (2017), 한국융합학회[DOI]
- 유재한, "액체 로켓 터보 펌프 터빈의 천이 열전달 및 구조 해석", 한국항공우주학회지, 32(3), pp.58~65 (2004), 한국항공우주학회