보행 장애인의 승차감 개선을 위한 휠체어용 능동형 서스펜션 시스템 개발
Development of Active Suspension System for Wheelchairs to Improve Riding Comfort of Gait Disorders
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
As the number of people with gait disorders increases, the demand for using wheelchairs increases and the area of a ctivity for people with disabilities expands, thereby they increasing the demand for riding comfortability in various driving environments. Therefore, this study is to develop an entry-level active suspension system that apply to wheelchairs and to evaluate its usability. The suspension applied in this paper consists of a coil spring, a shock absorber, a control module to control the strength of the shock absorber, and a road surface condition monitoring system. A wheelchair occupant secures the riding comfort by adjusting the coil strength of the shock absorber in 12 steps according to various road conditions. Therefore, the mechanical properties were evaluated through the structural analysis of the suspension system, and the tendency toward the magnitude of the road surface vibration attenuated according to the rigidity of the suspension through the vibration test was attempted. In conclusion, as a result of structural analysis of the suspension system, stress in a range lower than the yield strength of the material was generated, and the vibration test showed the effect of attenuating the vibration generated from the road surface when the stiffness of the suspension was adjusted.
Abstract
As the number of people with gait disorders increases, the demand for using wheelchairs increases and the area of a ctivity for people with disabilities expands, thereby they increasing the demand for riding comfortability in various driving environments. Therefore, this study is to develop an entry-level active suspension system that apply to wheelchairs and to evaluate its usability. The suspension applied in this paper consists of a coil spring, a shock absorber, a control module to control the strength of the shock absorber, and a road surface condition monitoring system. A wheelchair occupant secures the riding comfort by adjusting the coil strength of the shock absorber in 12 steps according to various road conditions. Therefore, the mechanical properties were evaluated through the structural analysis of the suspension system, and the tendency toward the magnitude of the road surface vibration attenuated according to the rigidity of the suspension through the vibration test was attempted. In conclusion, as a result of structural analysis of the suspension system, stress in a range lower than the yield strength of the material was generated, and the vibration test showed the effect of attenuating the vibration generated from the road surface when the stiffness of the suspension was adjusted.
참고문헌 (15)
- 임구, "세단 승용차량 트렁크용 휠체어 수납 시스템에 관한 연구", 드라이브·컨트롤, 16(3), pp.8~15 (2019), 사단법인 유공압건설기계학회[DOI]
- 김정현, "한국형 휠체어 탑승 고속버스에 대한 사용성 연구", 한국산학기술학회논문지, 20(7), pp.571~577 (2019), 한국산학기술학회
- 정지안, "수동휠체어 계단 승월을 보조하기 위한 전동어시스트 모듈의 직진 주행 보정 기법에 관한 연구", 전자공학회논문지, 56(12), pp.134~141 (2019), 대한전자공학회
- Kim BS, "Study of Electric Car Manufacturing Using Self Made Technology", Journal of The Korean Society of Automotive Engineers, 2019(11), pp.1384~1388 (2019)
- Han SW, "Development of Unified Chassis Control System for Vehicle Stability with Active Suspension and Torque Vectoring", Journal of The Korean Society of Automotive Engineers, 2019(5), pp.387~389 (2019)
- Jang SH, "Semi-Active Control of Wheelchair Suspension for the Ride Comfort Improvement", Journal of Institute of Control, Robotics and Systems, 2019(5), pp.460~461 (2019)
- Jung JS, "Test Method of Safety in Wheel Position for Wheelchair", Journal of The Korean Society of Manufacturing Process Engineers, 2011(11), pp.94~ (2011)
- CATENARO, EDOARDO, "Modeling and experimental analysis of a bicycle equipped with an in-wheel suspension system", Master, pp.2018
- Kim KC, "Development of Active Suspension Control Logic for Improving Ride Comfort using State Constraint SMC", Journal of The Korean Society of Automotive Engineers, 2018(6), pp.425~ (2018)
- Jeong JH, "A Study On The Active Suspension Control For Improving Vehicle Handling Performance", Journal of The Korean Society of Automotive Engineers, 2018(6), pp.404~ (2018)
- Kwon HD, "The study of Timing Belt Tracking & Pulley Flange Design for reducing belt wear", Journal of The Korean Society of Automotive Engineers, 2019(5), pp.124~127 (2019)
- 김해지, "Polyjet방식 3D 프린터를 이용한 스트레이트 베벨기어의 제작 특성에 관한 실험적 연구", 한국기계가공학회지, 14(6), pp.63~68 (2015), 한국기계가공학회[DOI]
- Choi GH, "A study on the design of light weight impact beam using aluminum material", Journal of Korean Society of Automotive Engineers, 2014(5), pp.14~ (2014)
- Yoon YG, "Effects of Heat-Treatment on the Microstructure and Mechanical Properties of Cu-1.9% Be-O.2%Co Alloy", Journal of Metals and Materials, 1971(1), pp.1~10 (1971)
- Jee DH, "A Systematic Approach for Material Selection of Parts", Journal of The Korean Society of Automotive Engineers, 1996(6), pp.353~359 (1996)