유전알고리즘을 이용한 로봇 매니퓰레이터의 모델예측제어기 설계
Design of MPC for Robot Manipulators using Genetic Algorithms
3
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper proposes a model predictive controller of robot manipulators using a genetic algorithm to secure the best performance by performing parameter optimization with the genetic algorithm. Genetic algorithm is a natural evolutionary process modeled as a computer algorithm and has excellent performance in global optimization, so it is useful for tuning control parameters. The sliding mode controller and inverse dynamics controller are included in the lower part of the model prediction controller to minimize the problems caused by non-linearity and uncertainty of the robot manipulator. The performance superiority of the proposed method as described above has been confirmed in detail through a simulation study.
Abstract
This paper proposes a model predictive controller of robot manipulators using a genetic algorithm to secure the best performance by performing parameter optimization with the genetic algorithm. Genetic algorithm is a natural evolutionary process modeled as a computer algorithm and has excellent performance in global optimization, so it is useful for tuning control parameters. The sliding mode controller and inverse dynamics controller are included in the lower part of the model prediction controller to minimize the problems caused by non-linearity and uncertainty of the robot manipulator. The performance superiority of the proposed method as described above has been confirmed in detail through a simulation study.
참고문헌 (16)
- K. M. Lynch, "Modern Robotics: Mechanics, Planning and Control" (2017), Cambridge University Press
- E. F. Camacho, "Model Predictive Control" (2004), Springer
- L. Wang, "Model Predictive Control System Design and Implementation Using MATLAB" (2009), Springer
- D. Gu, "Receding horizon tracking control of wheeled mobile robots", IEEE Trans on Control System Technology, 14(4), pp.743~749 (2006)
- S. Akiba, "Optimal tracking control of two-wheeled mobile robots based on model predictive control", Proc. IEEE Int Workshop on AMC, pp.454~459 (2010)
- G. Klancar, "Tracking-error model-based predictive control for mobile robots in real time", Robotics and Autonomous Systems, 55(6), pp.460~469 (2007)
- 손현식, "유전알고리즘을 이용한 이동로봇의 예측제어", 한국정보통신학회논문지, 21(4), pp.698~707 (2017), 한국정보통신학회[DOI]
- 최영규, "제한조건을 갖는 이동로봇의 유전알고리즘에 의한 예측제어", 한국정보통신학회논문지, 22(1), pp.9~16 (2018), 한국정보통신학회[DOI]
- 박진현, "속도 및 가속도 제한조건을 갖는 모델예측제어기 설계", 한국기계기술학회지, 20(6), pp.809~817 (2018), 한국기계기술학회[DOI]
- 박진현, "일반제한조건의 이동로봇예측제어기 최적화", 한국정보통신학회논문지, 22(4), pp.602~610 (2018), 한국정보통신학회[DOI]
- L. Sciavicco, "Modelling and Control of Robot Manipulators" (2000), Springer-Verlag
- A. Ferrara, "Design of an integral suboptimal second order sliding mode controller for the robust motion control of robot manipulators", IEEE Trans. Control Syst. Technol, 23(6), pp.2316~2325 (2015)
- G. P. Incremona, "MPC for robot manipulators with integral sliding modes generation", IEEE, 2017, pp.22(3), 1299~1307
- 황시랑, "유전알고리즘을 이용한 로봇 매니퓰레이터의 동적제어기 설계", 한국기계기술학회지, 21(2), pp.195~205 (2019), 한국기계기술학회[DOI]
- M. Mitchell, "An Introduction to Genetic Algorithms" (1998), The MIT Press
- Z. Michalewicz, "Genetic Algorithms + Data Structures = Evolution Program" (1996), Springer