선박용 알루미늄 합금(Al-5083)의 워터젯 절단 시 절단 품질 향상에 관한 연구
Study on Improvement of Cutting Quality in Abrasive Water Jet Cutting of Aluminum Alloy(Al-5083) for Shipbuilding
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The cutting quality of abrasive water jet cutting of aluminum alloy(Al-5083) for shipbuilding is affected by the surface roughness, cutting pressure, cutting speed, and the distance between nozzle and material. The cross-section of water jet cutting is formed a V-shape as the cutting speed increase. The upper width(kerf width) is wide and the lower surface is narrow. The width of cutting cross-sections are effected in the order of cutting speed, cutting pressure, and distance between nozzle and material. From the experimental results, to improve of cutting quality of abrasive water jet cutting of aluminum alloy(Al-5083) for shipbuilding, the optimal cutting conditions to improve the surface roughness and kef width are proposed and discussed.
Abstract
The cutting quality of abrasive water jet cutting of aluminum alloy(Al-5083) for shipbuilding is affected by the surface roughness, cutting pressure, cutting speed, and the distance between nozzle and material. The cross-section of water jet cutting is formed a V-shape as the cutting speed increase. The upper width(kerf width) is wide and the lower surface is narrow. The width of cutting cross-sections are effected in the order of cutting speed, cutting pressure, and distance between nozzle and material. From the experimental results, to improve of cutting quality of abrasive water jet cutting of aluminum alloy(Al-5083) for shipbuilding, the optimal cutting conditions to improve the surface roughness and kef width are proposed and discussed.
참고문헌 (9)
- 김성일, "선박용 Al 합금의 레이저 절단시 표면 특성에 관한 연구", 한국생산제조학회지, 18(5), pp.529~535 (2009), 한국생산제조학회
- Hashish, M., "A Modeling Study of Metal Cutting with Abrasive Water Jets", ASME Journal Engineering Materials and Technology, 106(1), pp.88~100 (1984)
- 방홍인, "금형강의 절삭 가공 최적화에 관한 연구", 한국기계기술학회지, 23(5), pp.905~909 (2021), 한국기계기술학회[DOI]
- 정남용, "티타늄 합금의 연마제 워터 제트 절단에 의한 절단표면 특성", 대한용접접합학회지, 23(1), pp.86~93 (2005), 대한용접접합학회
- 유승현, "CFRP의 Trimming 가공시 가공특성에 관한 연구", 한국기계기술학회지, 23(4), pp.505~510 (2021), 한국기계기술학회[DOI]
- Y. H. Jin, "Characteristics of Cut Surface by Abrasive Waterjet Cutting of Titanium Alloy", 2004 KSAE Annual Conference, pp.1441~1447 (2004)
- 민병현, "AWJM을 이용한 Al6061 절단조건 최적화에 관한 연구", 한국기계가공학회지, 5(3), pp.65~70 (2006), 한국기계가공학회
- S. S. Park, "Manufacturing execution system monitoring remain and constant supply", Journal of the Korean Society of Manufacturing Technology Engineering 2014 spring conference, pp.237~ (2014)
- B. S. Shin, "A study on the micro cutting characteristics of multi-layered material by abrasive water jet", Journal of the Korean Society of Manufacturing Technology Engineering 2007 spring conference, pp.159~164 (2007)