레이저 표면처리를 통한 이종소재 접합강도 연구
A Study on the Bonding Strength of Dissimilar Materials Through Surface Treatment by Laser
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study investigated variables for improving adhesive strength using laser surface treatment when bonding dissimilar materials using adhesives. adhesive strength analysis was performed for CFRP and Al6061 by laser irradiation intensity, and surface roughness was measured to analyze the related results. In the case of CFRP, the adhesive strength was good when the surface was not treated. In the case of Al6061, the adhesive strength was 25 MPa when the surface was treated with 20W, the maximum output of the laser surface treatment equipment, and the adhesive strength was improved by 125% compared to the untreated specimen. In addition, by measuring the surface roughness in the experiment, it was confirmed that the higher the surface roughness, the better the adhesive strength.
Abstract
This study investigated variables for improving adhesive strength using laser surface treatment when bonding dissimilar materials using adhesives. adhesive strength analysis was performed for CFRP and Al6061 by laser irradiation intensity, and surface roughness was measured to analyze the related results. In the case of CFRP, the adhesive strength was good when the surface was not treated. In the case of Al6061, the adhesive strength was 25 MPa when the surface was treated with 20W, the maximum output of the laser surface treatment equipment, and the adhesive strength was improved by 125% compared to the untreated specimen. In addition, by measuring the surface roughness in the experiment, it was confirmed that the higher the surface roughness, the better the adhesive strength.
참고문헌 (7)
- 주연진, "자동차 경량화를 위한 천연 섬유소재의 대체 가능성에 관한 연구", 한국기계기술학회지, 23(5), pp.708~714 (2021), 한국기계기술학회[DOI]
- 김동범, "이종재료 접합을 위한 Self-Piercing Rivet의 형상 설계", 한국기계기술학회지, 14(3), pp.93~99 (2012), 한국기계기술학회[DOI]
- 김용, "아크 열원을 이용한 스틸과 알루미늄의 이종접합에 관한 연구(Ⅰ) - 이종접합 연구동향 및 공정 비교 -", 대한용접접합학회지, 36(4), pp.1~12 (2018), 대한용접접합학회[DOI]
- Qiu, X, "Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP", Composite Structures, 203, pp.404~413 (2018)
- Xie, Y, "Shear strength of bonded joints of carbon fiber reinforced plastic (CFRP) laminates enhanced by a two-step laser surface treatment", Composite Structures, 232, pp.111559~ (2020)
- Wan, H, "Effect of laser spot overlap ratio on surface characteristics and adhesive bonding strength of an Al alloy processed by nanosecond pulsed laser", Journal of Manufacturing Processes, 62, pp.555~565 (2021)
- Wu, Y, "Effect of laser ablation surface treatment on performance of adhesive-bonded aluminum alloys", Surface and Coatings Technology, 304, pp.340~347 (2016)