대형 적층/가공 시스템에서 적층조건에 따른 인장강도에 관한 연구
A Study on the Tensile Strength According to Deposition Conditions in a Large-Scale Additive and Subtractive Manufacturing System
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, the CFRP(Carbon Fiber Reinforced Plastic) parts were printed and cut in a large-scale additive and subtractive hybrid manufacturing system. A method to increase the strength and durability of a product by identifying the interlayer adhesion during the printing process of a large-scale additive manufacturing hybrid system was investigated. According to the printing conditions(CF content, deposition temperature, compaction process), the specimen was printed and cut to determine the tensile strength in the printing direction. As a result of the experiment, the highest tensile strength was shown when ABS-CF 20wt.% Compound was printed at 230℃ extrusion temperature, and the higher the CF content of the material, the lower the tensile strength. As a result of observing the inside of the test piece through an optical microscope, a large number of voids were kept inside the test piece. To remove voids generated inside the test piece, a compaction process was applied to the additive manufacturing hybrid system to prepare a test piece. As a result, void size decreased, and the strength of the part showed a tendency to increase. It is thought that additive manufacturing with high tensile strength can be obtained through studies on the optimization of deposition conditions in additive manufacturing hybrid systems.
Abstract
In this paper, the CFRP(Carbon Fiber Reinforced Plastic) parts were printed and cut in a large-scale additive and subtractive hybrid manufacturing system. A method to increase the strength and durability of a product by identifying the interlayer adhesion during the printing process of a large-scale additive manufacturing hybrid system was investigated. According to the printing conditions(CF content, deposition temperature, compaction process), the specimen was printed and cut to determine the tensile strength in the printing direction. As a result of the experiment, the highest tensile strength was shown when ABS-CF 20wt.% Compound was printed at 230℃ extrusion temperature, and the higher the CF content of the material, the lower the tensile strength. As a result of observing the inside of the test piece through an optical microscope, a large number of voids were kept inside the test piece. To remove voids generated inside the test piece, a compaction process was applied to the additive manufacturing hybrid system to prepare a test piece. As a result, void size decreased, and the strength of the part showed a tendency to increase. It is thought that additive manufacturing with high tensile strength can be obtained through studies on the optimization of deposition conditions in additive manufacturing hybrid systems.
참고문헌 (11)
- P. Wray, "Additive Manufacturing – Turning manufacturing inside out", American Ceramic Society Bulletin, 93(3), pp.17~23 (2014)
- 김기대, "FDM 방식 3D 프린팅에서 제작 조건에 따른기계적물성치와 형상정밀도의 실험적 비교", 한국기계가공학회지, 20(8), pp.52~59 (2021), 한국기계가공학회[DOI]
- 박성제, "Fossil PC와 Bio-based PC의 Bulk 강도, Weldline 강도, 3D 프린팅 적층물의 적층강도 비교", 폴리머, 41(3), pp.531~538 (2017), 한국고분자학회[DOI]
- 윤해성, "압출방식 3D 프린팅 적층물의 단면 형태와 적층강도와의 관계", 폴리머, 42(5), pp.752~762 (2018), 한국고분자학회[DOI]
- 박성제, "압출 적층 방식의 3D 프린팅 조형물에서 적층강도에 대한 고찰", 폴리머, 40(6), pp.846~851 (2016), 한국고분자학회[DOI]
- 나두현, "3D 프린팅을 이용한 PLA+ 소재의 다양한 출력 조건에 따른 인장강도에 대한 연구", 소성∙가공, 31(2), pp.89~95 (2022), 한국소성∙가공학회[DOI]
- 유정욱, "전기자동차 배터리 모듈 커버의 3D 프린팅 제작을 위한 GF", PC 복합소재 필라멘트 설계와 3D 프린팅 공정 및 구조 최적화, 2021, pp.34(4), 241~248[DOI]
- Cincinnati, "Design Guidelines for BAAM", Cincinnati Incorporated, 1~11 (2019)
- A. M. Forster, "Materials Testing Standards for Additive Manufacturing of Polymer Materials: State of the Art and Standards Applicability, National Institute of Standards and Testing, NISTIR 8059", NIST, 1~54 (2015)
- 이송연, "3D프린팅 공정 중 공기 습도에 따른 출력물의 인장 강도에 관한 연구", 반도체디스플레이기술학회지, 20(4), pp.177~181 (2021), 한국반도체디스플레이기술학회
- 김경아, "3D 프린팅 활용을 위한 ABS 시편의 공정인자에 따른 기계적 물성 평가", 한국기계기술학회지, 23(2), pp.300~305 (2021), 한국기계기술학회[DOI]