차량 시트 레일용 리드 스크류의 동역학적 해석을 통한 회전 토크 값 분석 연구
A Study on the Analysis of Rotational Torque Values for Vehicle Seat Rail Lead Screws through Dynamic Analysis
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The objective of this study is to analyze the difference between the theoretically calculated torque values of lead screws used in vehicle seat rails and the required torque values due to various disturbances that occur in actual systems. Lead screws were classified into square and trapezoidal threads and modeled by two lead type. Dynamic analysis models were constructed by applying contact conditions and rotational joints between the lead screw and nut. The validity of the dynamic model was verified by comparing the torque values obtained from rigid body dynamic analysis with the theoretically calculated torque values. Then, the lead screw was modeled as a flexible body to investigate the torque variation required for the lead screw when dynamic loads are considered. This study will help predict the actual torque values of lead screws for seat rails.
Abstract
The objective of this study is to analyze the difference between the theoretically calculated torque values of lead screws used in vehicle seat rails and the required torque values due to various disturbances that occur in actual systems. Lead screws were classified into square and trapezoidal threads and modeled by two lead type. Dynamic analysis models were constructed by applying contact conditions and rotational joints between the lead screw and nut. The validity of the dynamic model was verified by comparing the torque values obtained from rigid body dynamic analysis with the theoretically calculated torque values. Then, the lead screw was modeled as a flexible body to investigate the torque variation required for the lead screw when dynamic loads are considered. This study will help predict the actual torque values of lead screws for seat rails.
참고문헌 (18)
- 김소울, "차량 시트의 해석기반 BSR 소음 저감 설계 방안 연구", 한국자동차공학회 논문집, 31(3), pp.199~208 (2023), 한국자동차공학회
- H. C. Lee, "A Study on the Comfort Evaluation Method for Automotive Seat", KSAE Fall Conference Proceedings, pp.1412~1416 (2007)
- S. K. Oh, "Technological Trend of Vehicle Seat with Occupants Protection and Electronics", KSAE Fall Conference Proceedings, pp.1253~1260 (2007)
- J. Y. Park, "Dynamic Analysis of the lead-screw for Verify the Safety of the Product design and Validate the self-locking", KSAE Spring Conference Proceedings, pp.853~ (2013)
- 최부희, "동회전 2축 스크류 압출기의 스크류 설계 파라미터에 관한 연구", 한국정밀공학회지, 20(7) (2003), 한국정밀공학회
- T. Jintanawan, "Design of a more efficient rotating-EM energy floor with lead-screw and clutch mechanism", Energies, 15(18), pp.6539~ (2022)
- 이정원, "버터플라이 밸브의 구조 안정성을 위한 성능해석 연구", 한국기계기술학회지, 23(4), pp.650~655 (2021), 한국기계기술학회[DOI]
- 박훈민, "모바일 로봇 액추에이터의 복합 유성기어 감속기 설계", 한국기계기술학회지, 23(2), pp.254~259 (2021), 한국기계기술학회[DOI]
- 정성필, "자동차 와이퍼 시스템의 유연 다물체 동역학 해석", 대한기계학회논문집 A, 34(2), pp.175~181 (2010), 대한기계학회
- J. Y. Kim, "Development of system NVH analysis model for chain type CVT", KSAE Spring Conference Proceedings, pp.25~30 (2021)
- 최명수, "유한요소-전달강성계수법을 이용한 골조 구조물의 과도응답해석", 한국소음진동공학회논문집, 12(9), pp.3~684 (2002), 한국소음진동공학회
- J. H. Nam, "Analysis of Friction Noise Mechanism in Lead Screw System of Autonomous Vehicle Seats and Dynamic Instability Prediction Based on Deep Neural Network", Sensors, 23(13), pp.6169~ (2023)
- J. H. Nam, "Investigation of friction induced vibration in lead screw system using FE model and its experimental validation", Applied Acoustics, 122, pp.98~106 (2017)
- S. M. Choi, "Lead Screw moving Slide Mechanism Effect on the Power Seat Performance", KSAE Fall Conference Proceedings, pp.1570~1577 (2007)
- 강재영, "자동차 시트 틸팅 각도에 따른 기어박스 마찰소음 영향도", 한국소음진동공학회논문집, 20(6), pp.577~582 (2010), 한국소음진동공학회
- 송명의, "트라이포드 타입 등속조인트의 다물체 동역학 해석", 한국자동차공학회 논문집, 18(1), pp.1~7 (2010), 한국자동차공학회
- "DAFUL Program Manual Version R1", ~ (2022)
- H. S. Han, "Technology for Fatigue Life Prediction of Mechanical Components using Multibody Dynamics", Research Journal : Korea Institute of Machinery and Materials, 27, pp.47~55 (1997)