충돌 해석 시 마찰 모델 적용을 위한 기초 마찰 시험 연구
Feasibility Study of Friction Characteristics for Impact Analysis
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Appropriate friction model usage is important for impact analysis because the relative motions between parts that are in contact for very short durations can vary greatly depending on the friction model. Vehicle seat components that have significant effects on impact analysis are also considered. This paper presents an experimental investigation of various material contact pairs to obtain the friction parameters of the Benson exponential friction model for impact simulation. The Coulomb friction model has limitations for impact analysis because of singularity at zero velocity. Metal/nonmetal materials are prepared, and friction tests are conducted for various sliding speeds, loads, and lubrication conditions. The obtained data are used in the friction model to implement finite element analysis. The parameters of the friction model are obtained by the curve-fitting method. The experimental results show that the friction coefficient with metal/nonmetal contact pairs is stable regardless of the working conditions. The friction model used in this study can also be applied for finite element analysis of the crash conditions, where the friction changes abruptly at the contact interface; the obtained friction parameters are also expected to be more accurate with more precise tests under different working conditions. These results can help improve the accuracy of the finite element analysis.
Abstract
Appropriate friction model usage is important for impact analysis because the relative motions between parts that are in contact for very short durations can vary greatly depending on the friction model. Vehicle seat components that have significant effects on impact analysis are also considered. This paper presents an experimental investigation of various material contact pairs to obtain the friction parameters of the Benson exponential friction model for impact simulation. The Coulomb friction model has limitations for impact analysis because of singularity at zero velocity. Metal/nonmetal materials are prepared, and friction tests are conducted for various sliding speeds, loads, and lubrication conditions. The obtained data are used in the friction model to implement finite element analysis. The parameters of the friction model are obtained by the curve-fitting method. The experimental results show that the friction coefficient with metal/nonmetal contact pairs is stable regardless of the working conditions. The friction model used in this study can also be applied for finite element analysis of the crash conditions, where the friction changes abruptly at the contact interface; the obtained friction parameters are also expected to be more accurate with more precise tests under different working conditions. These results can help improve the accuracy of the finite element analysis.
참고문헌 (10)
- Park, J. H., "Dynamic Analysis of Constrained Multibody Systems Undergoing Collision with Friction", Transactions of the Korean Society of Mechanical Engineer-A, 24(7), pp.1712~1720 (2000)
- 정남균, "2중 실린더 구조를 갖는 인장 가스스프링의 마찰력 변화에 따른 피스톤 거동에 대한 연구", 한국산학기술학회논문지, 19(2), pp.9~14 (2018), 한국산학기술학회[DOI]
- Liu, Y. F., "Experimental Comparison of Five Friction Models on the Same Test-bed of the Micro Stickslip Motion System", Mechanical Sciences, 6, pp.15~28 (2015)
- Arakawa K., "An Analytical Model of Dynamic Sliding Friction During Impact", Scientific Report, 7, pp.1~5 (2017)
- Lodygowski, A., "Dry Sliding Friction Experiments at Elevated Velocities", Strain, 47(2), pp.436~453 (2011)
- Anvari, A., "Friction Coefficient Variation with Sliding Velocity in Copper with Copper Contact", Periodica Polytechnica Mechanical Engineering, 60(3), pp.137~141 (2016)
- 홍석준, "윤활제 특성에 따른 시트 리클라이너 부품의 마찰 및 마모 특성", 한국트라이볼로지학회지, 35(3), pp.183~189 (2019), 한국트라이볼로지학회[DOI]
- Yang, Y. M., "Effect of Lubricant Viscosity on the Frictional Characteristics of Polymer Material", Proc. Fall Conf. Korean Soc. Tribol. Lubr. Engr (2016)
- Dong, S., "Friction in LS-Dyna : Experimental Characterization and Modeling Application", 14th International LS-Dyna Users Conference (2016)
- Pennestri, E., "Review and Comparison of Dry Friction Force Models", Nonlinear Dynamics, 83, pp.1785~1801