곡률비 변화에 따른 이중관 나선형 열교환기의 열전달 특성에 관한 실험적 연구
Experimental Study on Heat Transfer Characteristics of Double-pipe Spiral Heat Exchanger with Various Curvature Ratios
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The heat transfer characteristics of double-pipe spiral heat exchanger were investigated by various curvature sizes, experimentally. The three different sizes of heat exchanger were made and tested with water as a working fluid to analyze the heat transfer characteristics. The heat transfer rates, overall heat transfer coefficient and pressure drop were analyzed with various heat exchanger sizes (i.e., curvature ratios). As result, the heat transfer rate increased with increasing the size of the heat exchanger as the flow rate increased due to increasing the area size of heat transfer. However, the overall heat transfer coefficient and pressure drop increased with decreasing the heat exchanger size (i.e., increased curvature ratio) due to the enhanced centrifugal force and inertia.
Abstract
The heat transfer characteristics of double-pipe spiral heat exchanger were investigated by various curvature sizes, experimentally. The three different sizes of heat exchanger were made and tested with water as a working fluid to analyze the heat transfer characteristics. The heat transfer rates, overall heat transfer coefficient and pressure drop were analyzed with various heat exchanger sizes (i.e., curvature ratios). As result, the heat transfer rate increased with increasing the size of the heat exchanger as the flow rate increased due to increasing the area size of heat transfer. However, the overall heat transfer coefficient and pressure drop increased with decreasing the heat exchanger size (i.e., increased curvature ratio) due to the enhanced centrifugal force and inertia.
참고문헌 (11)
- Rogers, G F C, "Heat Transfer and Pressure Loss in Helically Coiled Tubes with Turbulent Flow", International Journal of Heat and Mass Transfer, 7(11), pp.1207~1216 (1964)
- Dravid, Arun Nilkanth, "Effect of Secondary Fluid Motion on Laminar Flow Heat Transfer in Helically Coiled Tubes", AIChE Journal, 17(5), pp.1114~1122 (1971)
- Berger, S A, "Flow in Curved Pipes", Annual review of fluid mechanics, 15(1), pp.461~512 (1983)
- Kumar, Vimal, "Pressure Drop and Heat Transfer Study in Tube-in-Tube Helical Heat Exchanger", Chemical Engineering Science, 61(13), pp.4403~4416 (2006)
- Rennie, Timothy J., "Numerical Studies of a Double-Pipe Helical Heat Exchanger", Applied Thermal Engineering, 26(11-12), pp.1266~1273 (2006)[DOI]
- Mori, Yasuo, "Study of Forced Convective Heat Transfer in Curved Pipes (2nd Report, Turbulent Region)", International journal of heat and mass transfer, 10(1), pp.37~59 (1967)
- Schmidt, Eckehard F., "Wärmeübergang Und Druckverlust in Rohrschlangen", Chemie Ingenieur Technik, 39(13), pp.781~789 (1967)
- Srinivasan, P S, "Friction Factors for Coils", TRANSACTIONS OF THE INSTITUTION OF CHEMICAL ENGINEERS AND THE CHEMICAL ENGINEER, 48(4-6), pp.T156~ (1970)[DOI]
- Ito, Hidesato, "Friction Factors for Turbulent Flow in Curved Pipes", Trans. ASME, J. Basic Engng, D, 81, pp.123~134 (1959)
- Kahani, Mostafa, "Comparative Study between Metal Oxide Nanopowders on Thermal Characteristics of Nanofluid Flow through Helical Coils", Powder technology, 246, pp.82~92 (2013)
- Dravid, Arun Nilkanth, "Effect of Secondary Fluid Motion on Laminar Flow Heat Transfer in Helically Coiled Tubes", AIChE Journal, 17(5), pp.1114~1122 (1971)