배가스 열회수용 판형 열교환기 성능 특성 연구
Research on Plate-Type Exhaust Gas Heat Exchanger Performance Characteristics Analysis
3
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The research aimed to develop a high-efficiency plate-type heat exchanger for exhaust gas using computational fluid dynamics (CFD) thermal analysis based on the plate shape, and to identify the optimal shape. Following this, a water/air plate heat exchanger was manufactured, and its characteristics were studied experimentally. As the Re number increases on the gas (or air) side, the heat transfer rate increases significantly, whereas an increase in the Re number on the water side leads to a smaller increase in heat transfer. This is attributed to the larger convective heat resistance on the gas side, causing a substantial reduction in gas-side heat resistance as gas velocity increases, resulting in a considerable overall reduction in heat resistance. The fluid flow pressure drop showed similar results between the CFD calculations and experimental outcomes.
Abstract
The research aimed to develop a high-efficiency plate-type heat exchanger for exhaust gas using computational fluid dynamics (CFD) thermal analysis based on the plate shape, and to identify the optimal shape. Following this, a water/air plate heat exchanger was manufactured, and its characteristics were studied experimentally. As the Re number increases on the gas (or air) side, the heat transfer rate increases significantly, whereas an increase in the Re number on the water side leads to a smaller increase in heat transfer. This is attributed to the larger convective heat resistance on the gas side, causing a substantial reduction in gas-side heat resistance as gas velocity increases, resulting in a considerable overall reduction in heat resistance. The fluid flow pressure drop showed similar results between the CFD calculations and experimental outcomes.
참고문헌 (14)
- FengSheng Chien, "The role of technological innovation, carbon finance, green energy, environmental awareness and urbanization towards carbon neutrality： Evidence from novel CUP-FM CUP-BC estimations", Geoscience Frontiers, pp.101696~ (2023)
- Sinan Erdogan, "Towards carbon-neutral world： The effect of renewable energy investments and technologies in G7 countries", Renewable and Sustainable Energy Reviews, 186, pp.11368~ (2023)
- Hongliang Wang, "Multi-criteria evaluation and optimization of a new multigeneration cycle based on solid oxide fuel cell and biomass fuel integrated with a thermoelectric generator, gas turbine, and methanation cycle", Process Safety and Environmental Protection, 170, pp.139~156 (2023)
- Olga Arsenyeva, "Plate heat exchanger design for the utilisation of waster heat from exhaust gases of drying process", 233, pp.121186~ (2021)
- Dae Ki Kim, "A study on the heat Recovery from Boiler Exhaust Gas with Multi-stage Water-fluidized-bed Heat Exchanger", pp.1776~1783 (2001)
- J. Huang, "Review of vapor condensation heat and mass transfer in the presence of non-condensable gas", Applied Thermal Engineering, pp.469~484 (2015)
- Bhupal Kumar, "Effect of geometrical parameters on the performance of chevron type plate heat exchanger", Experimental Thermal and Fluid Science, pp.126~133 (2018)
- P. Kapustenko, "The heat and Momentum Transfers Relation in Channels of Plate Heat Exchanger", Engineering, physics, pp.99420015~ (2011)
- Daryoush Dadpour, "Multi objective optimization and 3E analyses of a novel supercritical", transcritical CO2 waste heat recovery from a ship exhaust, 2023, pp.278, 127843~
- Byung Chui Choi, "Thermodynamic analysis of a dual loop heat recovery system with trilateral cycle applied to exhaust gases of internal combustion engine for propulsion of the 6800 TEU container ship", Energy, 58, pp.404~416 (2013)
- Yicong Xu, "Feasibility study of an integrated air source heat pump water heater", chillers and exhaust gas boiler heating system for swimming pool on luxury cruise ship, 2022, pp.8, 1260~1282
- Liang Huang, "Dynamic calculation of ship exhaust emissions based on real-time AIS data", Transportation Research Part D: Transport and Environment, 80, pp.10227~ (2020)
- Dingbiao Wang, "Experimental and numerical study of plate heat exchanger based on topology optimization", International Journal of Thermal Sciences, 195, pp.10865~ (2024)
- Olga Arsenyeva, "Experimental investigation of thermal and hydraulic performance of panel plate heat exchangers", Thermal Science and Engineering Progress, 43, pp.01984~ (2023)