AZ31 마그네슘합금의 피로균열전파거동에 미치는 영향 인자
Factors Affecting Fatigue Crack Propagation Behavior in AZ31 Magnesium Alloy
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The objectives of this paper are to evaluate the factors affecting the fatigue crack propagation(FCP) behavior in AZ31 magnesium alloy. FCP experiments have been performed on the specimens of AZ31 magnesium alloy under various conditions such as a loading frequency, a specimen thickness, a maximum fatigue load, and a load ratio and the obtained results were analyzed to find the influence factors on the FCP behavior in magnesium alloy. It is necessary to consider the influence factors for the design and the maintenance of lightweight structures. The correlation between the crack growth rate exponent and the crack growth rate coefficient, which are FCP behavior parameters, was also analyzed and the regression model was presented.
Abstract
The objectives of this paper are to evaluate the factors affecting the fatigue crack propagation(FCP) behavior in AZ31 magnesium alloy. FCP experiments have been performed on the specimens of AZ31 magnesium alloy under various conditions such as a loading frequency, a specimen thickness, a maximum fatigue load, and a load ratio and the obtained results were analyzed to find the influence factors on the FCP behavior in magnesium alloy. It is necessary to consider the influence factors for the design and the maintenance of lightweight structures. The correlation between the crack growth rate exponent and the crack growth rate coefficient, which are FCP behavior parameters, was also analyzed and the regression model was presented.
참고문헌 (14)
- B. L. Mordike, "Magnesium : Properties-applications-potential", Materials Science and Engineering: A, 302(1), pp.37~45 (2001)
- 김현우, "마그네슘 합금 판재(AZ31B)의 온도 및 성형속도에 따른 2D-draw 굽힘 특성 분석", 한국기계기술학회지, 21(2), pp.221~227 (2019), 한국기계기술학회[DOI]
- 유명한, "AM60 합금 내 MWCNT 용탕 분산처리를 통한 기계적 물성 거동에 관한 연구", 한국기계기술학회지, 18(6), pp.918~923 (2016), 한국기계기술학회[DOI]
- K. Tokaji, "Fatigue Crack Propagation and Fracture Mechanisms of Wrought Magnesium Alloys in Different Environments", International Journal of Fatigue, 31(7), pp.1137~1143 (2009)
- K. Tokaji, "Fatigue behavior and fracture mechanism of a rolled AZ31", International Journal of Fatigue, 26, pp.1217~1224 (2004)
- S. Ishihara, "The effect of load ratio on fatigue life and crack propagation behavior of an extruded magnesium alloy", International Journal of Fatigue, 31(11-12), pp.1788~1794 (2009)
- S. Zheng, "An experimental study of fatigue crack propagation in extruded AZ31B magnesium alloy", International Journal of Fatigue, 47, pp.174~183 (2013)
- X. P. Zhang, "Orientation-related specimen thickness effects on mechanical properties of hot extruded AZ31B magnesium alloy", Materials and Design, 46, pp.256~263 (2013)
- W. Zhuang, "The Effect of Specimen Thickness on Fatigue Crack Growth Rate and Threshold Behaviour in Aluminium Alloy 7075-T7351", Proceedings of the 6th Australasian Congress on Applied Mechanics, pp.1444~1452 (2010)
- C. Wallbrink, "The effect of specimen thickness on fatigue crack growth under variable amplitude loading in 7075-T7351 Aluminium", Recent Advances in Structural Integrity Analysis-Proceedings of the International Congress(APCF, 2014, 109~113
- Y. M. Rhyim, "Effects of microstructure and specimen thickness on the fatigue crack closure in Al-Li 8090 alloy", Scripta Metallurgica et Materialia, 32(8), pp.1119~1124 (1995)
- S. S. Choi, "The Effect of Mean Stress on Fatigue Crack Propagation Behavior in Magnesium Alloy", Proceedings of the KSAE Spring Conference 2010, pp.1002~1004 (2010)
- S. S. Choi, "Influence of specimen thickness on fatigue crack propagation behavior in Mg alloy", Proceedings of the KSMTE Spring Conference 2010, pp.61~61 (2010)
- S. S. Choi, "Effect of maximum load on fatigue crack propagation behavior in Mg alloy under constant amplitude loading", Proceedings of the KSMTE Spring Conference 2010, pp.62~62 (2010)