이종알루미늄합금 FSW 접합부의 피로균열진전 특성
Fatigue Crack Growth Properties of Friction Stir Welded Dissimilar Aluminum Alloys
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The presence of a crack can increase the local stress or strain, which can cause inelastic deformation and significantly reduce the life of a component or structure. Therefore, in this study, the fatigue crack growth (FCG) behaviors of friction stir welded Al 2024‐T3 and Al 7075‐T6 specimens were examined, with fatigue cracks growing parallel to the dynamically recrystallized zone at variable ΔK values and an R ratio of 0.3. In addition, the FCG values of the base metal Al 2024‐T3 and Al 7075‐T6 were tested under the same conditions and parameters as comparative groups. The results showed that compared with the base metal Al 2024 specimen, which had the best fatigue property, the welded specimen had only 88% of the fatigue cycles.
Abstract
The presence of a crack can increase the local stress or strain, which can cause inelastic deformation and significantly reduce the life of a component or structure. Therefore, in this study, the fatigue crack growth (FCG) behaviors of friction stir welded Al 2024‐T3 and Al 7075‐T6 specimens were examined, with fatigue cracks growing parallel to the dynamically recrystallized zone at variable ΔK values and an R ratio of 0.3. In addition, the FCG values of the base metal Al 2024‐T3 and Al 7075‐T6 were tested under the same conditions and parameters as comparative groups. The results showed that compared with the base metal Al 2024 specimen, which had the best fatigue property, the welded specimen had only 88% of the fatigue cycles.
참고문헌 (14)
- 조제형, "알루미늄 소형선박의 마찰교반접합 적용 연구", 대한용접접합학회지, 30(2), pp.135~140 (2012), 대한용접접합학회[DOI]
- Hatamleh, O., "Fatigue Crack Growth of Peened Friction Stir-Welded 7075 Aluminum Alloy Different load Ratios", Journal of Materials Engineering Performance, 19, pp.99~106 (2010)
- 홍성진, "마찰교반용접된 5083-H32 및 6061-T651 알루미늄 합금의 피로균열성장 거동", 대한금속·재료학회지, 45(2), pp.90~100 (2007), 대한금속·재료학회
- 장석기, "Al 7075-T651의 마찰교반 용접에 대한 회전속도와 이송속도의 영향", 대한기계학회논문집 A, 31(4), pp.532~593 (2007), 대한기계학회
- 김선진, "용접 조건이 Al-7075-T651의 마찰교반용접부의 인장 특성에 미치는 영향", 한국동력기계공학회지, 15(2), pp.61~68 (2011), 한국동력기계공학회
- 김치옥, "7075-T651 알루미늄 판재의 마찰교반용접과 피로균열전파 특성", 대한기계학회논문집 A, 35(10), pp.1347~1353 (2011), 대한기계학회
- 이현준, "고주파열처리를 적용한 캠 샤프트 소재의 피로균열진전 특성", 한국해양공학회지, 23(3), pp.46~52 (2009), 한국해양공학회
- Joining Engineering, "Welding", pp.2008, Lee, Y. H.
- 임만배, "가스배관재의 X-선 회절분석과 피로균열거동에 관한 연구", 한국해양공학회지, 16(3), pp.54~58 (2002), 한국해양공학회
- Park, K. D., "A study on Fatigue Crack Propagation Behavior Pressure Vessel Steel SA516", 70 at High Temperature, 2001, pp.15(2), 105~110
- Park, W. J., "A Study on the Fatigue Characteristics of Al6061-T651 by Shot Peening Velocity", Key Engineering Materials, 326-328, pp.1093~1096 (2006)
- Peel, M. J., "Dissimilar Friction Stir Welds in AA5083-AA6082", Part Ⅱ: Process Parameter Effects on Microstruecture. Matall. Mater. Trans. A., 37(7), pp.2195~2206 (2006)
- Sato, Y. S., "Microtexture in Friction Stir Weld of an Aluminum Alloy", Metallurgical and Materials Transcations, 32A, pp.941~948 (2001)
- Woo, W. C., "Angular distortion and through-thickness residual stress distribution in the friction stir processed 6061-T6 aluminum alloy", Materials Science and Engineering A, 437, pp.64~69 (2006)