초 박판 부품 이송용 진동형 볼 피더의 성능분석
Performance Analysis of a Vibratory Bowl Feeder for Feeding Ultra Thin Plate Parts
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, 3D design, vibration analysis and experiment, and feed rate performance test were performed to develop a vibratory bowl feeder for supplying ultra-thin plate parts of less than 50 microns. The natural frequency and resonant frequency of the vibratory bowl feeder were obtained through the vibration analysis and experiment, and it was confirmed that the results of the analysis and experiment agree well. Through the feed rate experiment, it was confirmed that up to 610 ultra-thin parts per minute were fed at 250Hz and a supply voltage of 220V, where the excitation frequency and the resonant frequency match. And through analysis and experimental research, it was confirmed that the development of a vibratory bowl feeder for supplying ultra-thin parts was successful.
Abstract
In this study, 3D design, vibration analysis and experiment, and feed rate performance test were performed to develop a vibratory bowl feeder for supplying ultra-thin plate parts of less than 50 microns. The natural frequency and resonant frequency of the vibratory bowl feeder were obtained through the vibration analysis and experiment, and it was confirmed that the results of the analysis and experiment agree well. Through the feed rate experiment, it was confirmed that up to 610 ultra-thin parts per minute were fed at 250Hz and a supply voltage of 220V, where the excitation frequency and the resonant frequency match. And through analysis and experimental research, it was confirmed that the development of a vibratory bowl feeder for supplying ultra-thin parts was successful.
참고문헌 (10)
- M. A. Felizola, "Validation of Dynamic Modelling of an Industrial Vibratory Bowl Feeder", Academicjournals, 6(24), pp.1134~1138 (2013)
- X. Tian, "Structural Design and Experimental Analysis of a Piezoelectric Vibration Feeder with a Magnetic Spring", Micromachines, 5, pp.547~557 (2014)
- R. Bhagat, "Design and Development of Vibratory Bowl Feeder", International Research Journal of Engineering and Technology, 4(04), pp.1355~1358 (2017)
- S. C. Kim, "A Study on the Vibration Characteristics for Parts Feeder", Journal of the Korean Society of Machine Tool Engineers, 5(1), pp.17~26 (1996)
- 오석규, "진동형 볼피더의 가진력 해석과 적용", 한국기계가공학회지, 19(11), pp.70~77 (2020), 한국기계가공학회[DOI]
- K. Y. Bae, "Excitation Model and Motion Analysis of the Vibratory Bowl Feeder", International Journal of Mechanical and Production Engineering Research and Development, 10(2), pp.737~746 (2020)
- D. H. Lee, "Modal Analysis and Velocity Control of Bowl Parts Feeder Activated by Piezoactuators", Korean Society of Mechanical Engineers, 24(4), pp.839~847 (2000)
- T. Deshmukh, "Performance Analysis of a Vibratory Bowl Feeder", International Journal of Current Engineering and Technology, 7(5), pp.1741~1744 (2017)
- U. Jindal, "Graphical Analysis of a Vibratory Bowl Feeder for Clip Shaped Components", International Journal of Innovative Science, Engineering & Technology, 4(2), pp.279~283 (2017)
- H. F. Castro, "Experimental Performance Evaluation of Magnetic Actuator used in Rotating Machinery Analysis", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 29(1), pp.99~108 (2007)