고경도 금형강의 진동 가공에 대한 연구
A study on the vibration cutting of high-hardness mold steel
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we designed an vibration cutting tool that can achieve improvements such as low cutting force, interrupted chip evacuation and better surface quality of cutting performance to obtain high-quality surface roughness and improvement of tool wear, which is an issue in the machining of high-hardness mold steel. Among the resonance frequency modes of the vibration cutting tool, the bending mode was used to maximize the driving amplitude of the vibration tool tip, and the resonance frequency was confirmed through the finite element method. After measuring the actual resonant frequency of the designed tool using an optical fiber sensor, the cutting force and machining surface of vibration cutting and conventional cutting were compared and analyzed in the turning process of high hardness mold steel (STAVAX). As a result of the experiment, the cutting force was reduced by about 20 % compared to the conventional cutting process, and the surface roughness was also improved by about 60 %. This study suggested that the tool wear and surface quality of high-hardness steel can be improved through the vibration cutting method in the machining of high hardness mold steel.
Abstract
In this study, we designed an vibration cutting tool that can achieve improvements such as low cutting force, interrupted chip evacuation and better surface quality of cutting performance to obtain high-quality surface roughness and improvement of tool wear, which is an issue in the machining of high-hardness mold steel. Among the resonance frequency modes of the vibration cutting tool, the bending mode was used to maximize the driving amplitude of the vibration tool tip, and the resonance frequency was confirmed through the finite element method. After measuring the actual resonant frequency of the designed tool using an optical fiber sensor, the cutting force and machining surface of vibration cutting and conventional cutting were compared and analyzed in the turning process of high hardness mold steel (STAVAX). As a result of the experiment, the cutting force was reduced by about 20 % compared to the conventional cutting process, and the surface roughness was also improved by about 60 %. This study suggested that the tool wear and surface quality of high-hardness steel can be improved through the vibration cutting method in the machining of high hardness mold steel.
참고문헌 (20)
- 홍광표, "Co-Cr-Mo 합금의 선삭 가공 특성에 관한 연구", Design & Manufacturing, 11(1), pp.50~54 (2017), 한국금형공학회
- Seong-MinSon, "A Study on Critical depth of Cuts in Micro Grooving", Journal of Mechanical Science and Technology, 17(2), pp.239~245 (2003), 대한기계학회
- Kim, S.J, "Experiment-based statistical prediction on diamond tool wear in micro grooving Ni-P alloys", Diamond and Related Materials, 41, pp.6~13 (2014)
- Liu, X, "Burr formation mechanism of ultraprecision cutting for microgrooves on nickel phosphide in consideration of the diamond tool edge radius", The International Journal of Advanced Manufacturing Technology, 94(12), pp.3929~3935 (2018)
- 신봉철, "MR Fluid Polishing을 이용한 Co-Cr-Mo alloy의 초정밀 연마 방법", Design & Manufacturing, 11(3), pp.8~12 (2017), 한국금형공학회
- 김진범, "전해연마면의 표면경도 향상을 위한 플라즈마 이온질화 처리법에 관한 실험적 연구", Design & Manufacturing, 13(1), pp.13~18 (2019), 한국금형공학회[DOI]
- 임동욱, "MR fluid를 이용한 알루미늄 표면의 초정밀 연마 방법", Design & Manufacturing, 11(2), pp.20~24 (2017), 한국금형공학회
- 김종수, "Machining characteristics of micro lens mold in laser-assisted micro-turning", Journal of Mechanical Science and Technology, 32(4), pp.1769~1774 (2018), 대한기계학회
- 김종도, "Characteristics of laser assisted machining for silicon nitride ceramic according to machining parameters", Journal of Mechanical Science and Technology, 25(4), pp.995~1001 (2011), 대한기계학회
- Li, X., "Ultrasonic elliptical vibration transducer driven by single actuator and its application in precision cutting", Journal of Materials Processing Technology, 180(1-3), pp.91~95 (2006)
- Zhang, X.Q, "Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools", Journal of Materials Processing Technology, 211(11), pp.1701~1709 (2011)
- Shamoto, E, "Development of Ultrasonic Elliptical Vibration Controller for Elliptical Vibration Cutting", CIRP Annals, 51(1), pp.327~330 (2002)
- 쿠르니아완렌디, "Development of a two-frequency, elliptical-vibration texturing device for surface texturing", Journal of Mechanical Science and Technology, 31(7), pp.3465~3473 (2017), 대한기계학회
- Lin, J, "Development of non-resonant elliptical vibration cutting device based on parallel piezoelectric actuator", AIP Advances, 7(035304), pp.1~16 (2017)
- He, Y, "Ultrasonic elliptical vibration cutting of hard materials: simulation and experimental study", International Journal of Advanced Manufacturing Technology, 91, pp.363~374 (2017)
- Fan Chen, "Study on the characteristics of zirconia ceramic in three-dimensional ultrasonic vibration-assisted ELID internal grinding", Journal of Mechanical Science and Technology, 34(1), pp.333~344 (2020), 대한기계학회
- Yuemin Zhang, "Effect of machining parameters on the stability of separated and unseparated ultrasonic vibration of feed direction assisted milling", Journal of Mechanical Science and Technology, 31(2), pp.851~858 (2017), 대한기계학회
- Xu, L.H, "Machinability improvement with ultrasonic vibration assisted micro-milling", Advances in Mechanical Engineering, 10(12), pp.1~12 (2018)
- Kuo, K.L., "Design of rotary ultrasonic milling tool using FEM simulation", Journal of Materials Processing Technology, 201(1-3), pp.48~52 (2008)
- Vivekananda, K, "Design and Analysis of Ultrasonic Vibratory Tool (UVT) using FEM, and Experimental study on Ultrasonic Vibration-assisted Turning (UAT)", Procedia Engineering, 97, pp.1178~1186 (2014)