화재감지기 오동작 방지를 위한 소프트웨어 개선방안 도출
Derivation of Software Improvement to prevent malfunction of Fire Detector
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, we addressed the prevention of fire extinguishing device malfunction caused by noise in the fire detector of automatic fire extinguishing devices applied to mobile equipment such as armored vehicles and tanks. The automatic fire extinguishing system consists of a fire detection unit, an automatic control unit, and a fire suppression unit. In the case of a fire detector, it is a major component of the fire detection unit. Even though no fire occurred during operation in the field, a number of fire extinguisher sprays occurred, and the malfunction of the fire detector, which is a fire detection unit, was reproduced. The cause was identified as noise in the fire detector connector due to vibration and shock that may occur during operation of the mobility equipment. In order to solve this problem, noise generated momentarily from a fire detector is treated as an exception, and when a fire signal is transmitted from the fire detector to the automatic control unit for more than a certain period of time, Software has been improved to enable fire extinguishers to operate. This study analyzed the causes of malfunctions in automatic fire extinguishing devices, which are components of mobile equipment, and derived improvement measures to improve the reliability of automatic fire extinguishing devices.
Abstract
In this study, we addressed the prevention of fire extinguishing device malfunction caused by noise in the fire detector of automatic fire extinguishing devices applied to mobile equipment such as armored vehicles and tanks. The automatic fire extinguishing system consists of a fire detection unit, an automatic control unit, and a fire suppression unit. In the case of a fire detector, it is a major component of the fire detection unit. Even though no fire occurred during operation in the field, a number of fire extinguisher sprays occurred, and the malfunction of the fire detector, which is a fire detection unit, was reproduced. The cause was identified as noise in the fire detector connector due to vibration and shock that may occur during operation of the mobility equipment. In order to solve this problem, noise generated momentarily from a fire detector is treated as an exception, and when a fire signal is transmitted from the fire detector to the automatic control unit for more than a certain period of time, Software has been improved to enable fire extinguishers to operate. This study analyzed the causes of malfunctions in automatic fire extinguishing devices, which are components of mobile equipment, and derived improvement measures to improve the reliability of automatic fire extinguishing devices.
참고문헌 (6)
- S. D. Kim, "Design of automatic extinguishing system for special vehicles", Korean Institute of fire science &engineering, 2014, pp.171~172 (2014)
- Y. W. Joo, "Prevent malfunction of automatic fire extinguishing device by improving fire detection wire S", W, 2023, pp.24(10), 181~186
- Introduction of new fire detecting technology, "H. S. Hwang", The society of air-conditioning and refrigeration engineering of Korea, 215~222 (2002)
- H. S. Hwang, "Automatic fire detection equipment", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, 9(5), pp.3~11 (1995)
- Principle and Application of flame detector, "J. K. Kim", The society of air-conditioning and refrigeration engineering of Korea, 237~244 (2001)
- B. Y. Lee, "The Research & Development of Infra-Red Flame Detector", Fire science and engineering, 14(2), pp.1~6 (2000)