Influece of Stress-strain on the Microstructural Change in the Metallic Glass and Metallic Glass Matrix Composite

키워드

참고문헌 (41)

1. Abdel-Aal H A, "Thermal kinetics of protective oxide layer formation in the dry sliding of metallic tribo-specimens", Tribol. Int, 35, pp.757~769 (2002)
2. Agron A S, "Plastic deformation in metallic glasses", Acta Metall, 27, pp.47~58 (1979)
3. Archard J F, "The temperature of rubbing surfaces", Wear, 2, pp.438~455 (1959)
4. Bao Y, "On the cut-off value of negative triaxiality for fracture", Eng. Fract. Mech, 72, pp.1049~1069 (2005)
5. Bao Y, "On fracture locus in the equivalent strain and stress triaxiality space", Int. J. Mech. Sci, 46, pp.81~98 (2004)
6. Boucharat N, "Nanocrystallization of amorphous Al88Y7Fe5 alloy induced by plastic deformation", Scr. Mater, 53, pp.823~828 (2005)
7. Chen H, "Deformation-induced nanocrystal formation in shear bands of amorphous alloys", Nature, 367, pp.541~543 (1994)
8. Chovet C, "A mechanical analysis of the plane strain channel-die compression test: friction effects in hot metal testing", Int. J. Mech. Sci, 44, pp.343~357 (2002)
9. Christman T, "An experimental and numerical study of deformation in metal-ceramic composites", Acta Metall, 37, pp.3029~3050 (1989)
10. Conner R D, "Shear bands and cracking of metallic glass plates in bending", J. Appl. Phys, 94, pp.904~911 (2003)
11. Deng D, "Simulation of plastic deformation in a two-dimensional atomic glass by molecular dynamics IV", Phil. Trans. R. Soc. Lond. A, 329, pp.613~640 (1989)
12. Donovan P E, "A yield criterion for Pd40Ni40P20 metallic glass", Acta Metall, 37, pp.445~456 (1989)
13. Grebe H A, "Adiabatic shear localization in titanium and Ti-6 pct Al-4 pct V alloy", Matall. Trans. A, 16, pp.761~775 (1985)
14. Greer A L, "Metallic glasses", Science, 267, pp.1947~1953 (1995)
15. Harms U, "Thermal conductivity of Pd40Ni40−xCuxP20 metallic glasses", Scr. Mater, 47, pp.411~414 (2002)
16. He D, "Pressure-induced crystallization in a bulk amorphous Zr-based alloy", J. Non-Cryst. Solids, 297, pp.84~90 (2002)
17. Jaeger J C, "Moving sources of heat and the temperature at sliding contacts", Proc. R. Soc. NSW, 76, pp.203~224 (1942)
18. Jiang W H, "Effect of strain rate on the formation of nanocrystallites in an Al-based amorphous alloy during nanoindentation", J. Appl. Phys, 93, pp.9287~9290 (2003)
19. Kim J-J, "Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature", Science, 295, pp.654~657 (2002)
20. Kramer M J, "Absence of crystallization during cylindrical indentation of a Zr-based metallic glass", J. Non-Cryst. Solids, 351, pp.2159~2165 (2005)
21. Lee B J, "Stress induced crystallization of amorphous materials and mechanical properties of nanocrystalline materials: a molecular dynamics simulation study", Acta Mater, 51, pp.6233~6240 (2003)
22. 이병주, "Behavior of Amorphous Materials under Hydrostatic Pressures: A Molecular Dynamics Simulation Study", Metals and Materials International, 10(5), pp.467~474 (2004), 대한금속·재료학회
23. Lee J K, "Effects of Sn addition on the glass forming ability and crystallization behavior in Ni–Zr–Ti–Si alloys", J. Non-Cryst. Solids, 333, pp.212~220 (2004)
24. Lee M H, "Nanocrystallization at shear bands in bulk metallic glass matrix composites", Scripta Mater, 58, pp.651~654 (2008)
25. Lee M H, "Effect of geometrical constraint condition on the formation of nanoscale twins in the Ni-based metallic glass composite", Philos. Mag. Lett, 94, pp.351~360 (2014)
26. Lee M H, "Deformation-induced microstructural heterogeneity in monolithic Zr44Ti11Cu9.8Ni10.2Be25 bulk metallic glass", Phys. Status Solidi RRL, 3, pp.46~48 (2009)
27. Lewandowski J J, "Temperature rise at shear bands in metallic glasses", Nat. Mater, 5, pp.15~18 (2006)
28. Lewandowski J J, "Effects of hydrostatic pressure on the flow and fracture of a bulk amorphous metal", Philos. Mag. A, 82, pp.3427~3441 (2002)
29. Liu C T, "Test environments and mechanical properties of Zr-base bulk amorphous alloys", Metall. Mater. Trans. A, 29, pp.1811~1820 (1998)
30. Lund A C, "Yield surface of a simulated metallic glass", Acta Mater, 51, pp.5399~5411 (2003)
31. Pauly S, "Crack evolution in bulk metallic glasses", J. Appl. Phys, 106, pp.103518~ (2009)
32. Pekarskaya E, "In situ transmission electron microscopy studies of shear bands in a bulk metallic glass based composite", J. Mater. Res, 16, pp.2513~2518 (2001)
33. Saida J, "Nanoscale multistep shear band formation by deformation-induced nanocrystallization in Zr-Al-Ni-Pd bulk metallic glass", Appl. Phys. Lett, 87, pp.151907~ (2005)
34. Spaepen F, "A microscopic mechanism for steady state inhomogeneous flow in metallic glasses", Acta Metall, 25, pp.407~415 (1977)
35. Spaepen F, "Metallic glasses: Must shear bands be hot", Nat. Mater, 5, pp.7~8 (2006)
36. Steif P S, "Ductile versus brittle behavior of amorphous metals", J. Mech. Phys. Solids, 31, pp.359~388 (1983)
37. Teng X, "Numerical prediction of fracture in the Taylor test", Int. J. Solids Struct, 42, pp.2929~2948 (2005)
38. Vaidyanathan R, "Study of mechanical deformation in bulk metallic glass through instrumented indentation", Acta Mater, 49, pp.3781~3789 (2001)
39. Yang B, "Dynamic evolution of nanoscale shear bands in a bulk-metallic glass", Appl. Phys. Lett, 86, pp.141904~ (2005)
40. Ye F, "Pressure effect on crystallization kinetics of an Al–La–Ni amorphous alloy", Acta Mater, 47, pp.2449~2454 (1999)
41. Zhang Z F, "Fracture mechanisms in bulk metallic glassy materials", Phys. Rev. Lett, 91, pp.045505~ (2003)

관련 논문AI추천