Understanding of the Shear Bands in Amorphous Metals
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Shear banding is an evidence of plastic instability that localizes large shear strains in a relatively thin band when a material is plastically deformed. Shear bands have attracted much attention in amorphous metals, because shear bands are the key feature that controls the plastic deformation process. In this article, we review recent advances in understanding of the shear bands in amorphous metals regarding: dislocations versus shear bands, the formation of shear bands, hot versus cold shear bands, and property manipulation by shear band engineering. Although there are many key issues that remain puzzling, the understanding built-up from these approaches will provide a new insight for tailoring shear bands in amorphous metals, which potentially leads to unique property changes as well as improved mechanical properties. Indeed, this effort might open a new era to the future use of amorphous metals as a new menu of engineering materials.
Abstract
Shear banding is an evidence of plastic instability that localizes large shear strains in a relatively thin band when a material is plastically deformed. Shear bands have attracted much attention in amorphous metals, because shear bands are the key feature that controls the plastic deformation process. In this article, we review recent advances in understanding of the shear bands in amorphous metals regarding: dislocations versus shear bands, the formation of shear bands, hot versus cold shear bands, and property manipulation by shear band engineering. Although there are many key issues that remain puzzling, the understanding built-up from these approaches will provide a new insight for tailoring shear bands in amorphous metals, which potentially leads to unique property changes as well as improved mechanical properties. Indeed, this effort might open a new era to the future use of amorphous metals as a new menu of engineering materials.
참고문헌 (37)
- Argon A S, "Plastic deformation in metallic glasses", Acta Mater, 27, pp.47~58 (1979)
- Argon A S, "Plastic flow in a disordered bubble raft (an analog of metallic glass)", Mater. Sci. Eng, 39, pp.101~109 (1979)
- Ashby M F, "A first report on deformation-mechanism maps", Acta Mater, 20, pp.887~897 (1972)
- Ashby M F, "Metallic glasses as structural materials", Scripta Mater, 54, pp.321~326 (2006)
- Brown G W, "Magnetic structure of deformation-induced shear bands in amorphous Fe80B16Si4 observed by magnetic force microscopy", J. Appl. Phys, 85, pp.4415~ (1999)
- Bruck H A, "The dynamic compressive behavior of beryllium bearing bulk metallic glasses", J. Mater. Res, 11, pp.503~511 (1996)
- Chang H J, "On the origin of nanocrystals in the shear band in a quasicrystal forming bulk metallic glass Ti40Zr29Cu9Ni8Be14", Scripta Mater, 55, pp.509~512 (2006)
- Cheng Y Q, "Configurational dependence of elastic modulus of metallic glass", Phys. Rev. B, 80, pp.064104~ (2009)
- Cheng Y Q, "Cold versus hot shear banding in bulk metallic glass", Phys. Rev. B, 80, pp.134115~ (2009)
- Ding J, "Soft spots and their structural signature in a metallic glass", Proc. Natl. Acad. Sci. U S A, 111, pp.14052~14056 (2014)
- Gibert C J, "Light emission during fracture of a Zr-Ti-Ni-Cu-Be bulk metallic glass", Appl. Phys. Lett, 74, pp.3809~3811 (1999)
- Greer A L, "Shear bands in metallic glasses", Mater. Sci. Eng. R, 74, pp.71~132 (2013)
- Gu X, "Structure of shear bands in Zirconium-based metallic glasses observed by transmission election microscopy", Mater. Res. Soc. Proc, 754, pp.CC7.9.1.~CC7.9.6. (2003)
- Guo H, "Tensile ductility and necking of metallic glass", Nature Mater, 6, pp.735~739 (2007)
- Han Z, "An instability index of shear band for plasticity in metallic glasses", Acta Mater, 57, pp.1367~1372 (2009)
- Hofmann D C, "Shape memory bulk metallic glass composites", Science, 329, pp.1294~1295 (2010)
- Lee M H, "Improved plasticity of bulk metallic glasses upon cold rolling", Scripta Mater, 62, pp.678~681 (2010)
- Lewandowski J J, "Temperature rise at shear bands in metallic glasses", Nature Mater, 5, pp.15~18 (2006)
- Liu C T, "Test environments and mechanical properties of Zr-base bulk amorphous alloys", Metall. Mater. Trans. A, 29, pp.1811~1820 (1998)
- Lu J, "Deformation behavior of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass over a wide range of strain-rates and temperatures", Acta. Mater, 51, pp.3429~3443 (2003)
- Masumoto T, "Structural stability and mechanical properties of amorphous metals", Mater. Sci. Eng, 19, pp.1~24 (1975)
- Megusar J, "Plastic flow and fracture in Pd80Si20 near Tg", Tg. Mater. Sci. Eng, 38, pp.63~72 (1979)
- Pauly S, "Transformationmediated ductility in CuZr-based bulk metallic glasses", Nature Mater, 9, pp.473~477 (2010)
- Pauly S, "Criteria for tensile plasticity in Cu–Zr–Al bulk metallic glasses", Acta. Mater, 58, pp.4883~4890 (2010)
- Reynolds O, "On the dilatancy of media composed of rigid particles in contact", Phil. Mag, 20, pp.469~481 (1885)
- Schall P, "Structural rearrangements that govern flow in colloidal glasses", Science, 318, pp.1895~1899 (2007)
- Schuh C A, "Mechanical behavior of amorphous alloys", Acta Mater, 55, pp.4067~4109 (2007)
- Schuh C A, "New regime of homogeneous flow in the deformation map of metallic glasses: elevated temperature nanoindentation experiments and mechanistic modeling", Acta Mater, 52, pp.5879~5891 (2004)
- Shan Z W, "Plastic flow and failure resistance of metallic glass: Insight from in situ compression of nanopillars", Phys. Rev. B, 77, pp.155419~ (2008)
- Song S X, "Flow serration and shear-band viscosity during inhomogeneous deformation of a Zr-based bulk metallic glass", Intermetallics, 17, pp.762~767 (2009)
- Song S X, "Flow serration in a Zr-based bulk metallic glass in compression at low strain rates", Intermetallics, 16, pp.813~818 (2008)
- Spaepen F, "A microscopic mechanism for steady state inhomogeneous flow in metallic glasses", Acta Mater, 25, pp.407~415 (1977)
- Spaepen F, "Metallic glasses: Must shear bands be hot?", Nature Mater, 5, pp.7~8 (2006)
- Wu Y, "Bulk Metallic Glass Composites with Transformation-Mediated Work-Hardening and Ductility", Adv. Mater, 22, pp.2770~2773 (2010)
- Wu Y, "Ductilizing bulk metallic glass composite by tailoring stacking fault energy", Phys. Rev. Lett, 109, pp.245506~ (2012)
- Yang B, "In-situ thermographic observation of mechanical damage in bulk-metallic glasses during fatigue and tensile experiments", Intermetallics, 2, pp.1265~1274 (2004)