Phase Transformation and Work-hardening Behavior of Ti-based Bulk Metallic Glass Composite
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In present work, work-hardening behavior of TiCu-based bulk metallic glass composite with B2 particles has been studied by systemic structural and mechanical investigations. After yield, pronounced work-hardening of the alloy was clearly exhibited, which was mainly related to the martensitic transformation as well as the deformation twinning in B2 particles during deformation. At the early plastic deformation stage (work-hardening stage), the stress-induced martensitic transformation from B2 phase to B19' phase and deformation-induced twinning of B19' phase was preferentially occurred in the around interface areas between B2 phase and amorphous matrix by stress concentration. The higher hardness value was observed in vicinity of interface within the B2 particles which are probably connected with martensitic transformation and deformation twinning. This reveals that the work-hardening phenomenon of this bulk metallic glass composite is a result of the hardening of B2 particles embedded in amorphous matrix.
Abstract
In present work, work-hardening behavior of TiCu-based bulk metallic glass composite with B2 particles has been studied by systemic structural and mechanical investigations. After yield, pronounced work-hardening of the alloy was clearly exhibited, which was mainly related to the martensitic transformation as well as the deformation twinning in B2 particles during deformation. At the early plastic deformation stage (work-hardening stage), the stress-induced martensitic transformation from B2 phase to B19' phase and deformation-induced twinning of B19' phase was preferentially occurred in the around interface areas between B2 phase and amorphous matrix by stress concentration. The higher hardness value was observed in vicinity of interface within the B2 particles which are probably connected with martensitic transformation and deformation twinning. This reveals that the work-hardening phenomenon of this bulk metallic glass composite is a result of the hardening of B2 particles embedded in amorphous matrix.
참고문헌 (32)
- Das J, "Designing bulk metallic glass and glass matrix composites in martensitic alloys", J. Alloys Compd, 483, pp.97~101 (2009)
- Das J, "“Work-Hardenable” ductile bulk metallic glass", Phys. Rev. Lett, 94, pp.205501~ (2005)
- Fan C, "Mechanical behavior of bulk amorphous alloys reinforced by ductile particles at cryogenic temperatures", Phys. Rev. Lett, 96, pp.145506~ (2006)
- Fan C, "Metallic glass matrix composite with precipitated ductile reinforcement", Appl. Phys. Lett, 81, pp.1020~1022 (2002)
- Gargarella P, "Phase formation and mechanical properties of Ti-Cu-Ni-Zr bulk metallic glass composites", Acta Mater, 65, pp.259~269 (2014)
- Greer A L, "Metallic glasses", Science, 267, pp.1947~1953 (1995)
- Hays C C, "Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions", Phys. Rev. Lett, 84, pp.2901~2904 (2000)
- Hofmann D C, "Designing metallic glass matrix composites with high toughness and tensile ductility", Nature, 451, pp.1085~1089 (2008)
- Hofmann D C, "Development of tough, low-density titanium-based bulk metallic glass matrix composites with tensile ductility", Proc. Natl. Acad. Sci. U S A, 105, pp.20136~20140 (2008)
- Hollomon J H, "Tensile deformation", Trans. AIME, 162, pp.268~290 (1945)
- Hong S H, "Combinatorial influence of bimodal size of B2 TiCu compounds on plasticity of Ti-Cu-Ni-Zr-Sn-Si bulk metallic glass composites", Metall. Mater. Trans. A, 45, pp.2376~2381 (2014)
- Inoue A, "Cobalt-based bulk glassy alloy with ultrahigh strength and soft magnetic properties", Nature Mater, 2, pp.661~663 (2003)
- Inoue A, "Recent development and application products of bulk glassy alloys", Acta Mater, 59, pp.2243~2267 (2011)
- Kim J T, "Plastic deformation behavior of Fe-Co-B-Si-Nb-Cr bulk metallic glasses under nanoindentation", J. Alloys Compd, 587, pp.415~419 (2014)
- Kim K B, "Work hardening ability of ductile Ti45Cu40Ni7.5Zr5Sn2.5 and Cu47.5Zr47.5Al5 bulk metallic glasses", Appl. Phys. Lett, 89, pp.071908~ (2006)
- Kim K B, "Effect of Sn on microstructure and mechanical properties of (Ti-Cu)-based bulk metallic glasses", Philos. Mag. Lett, 86, pp.479~486 (2006)
- Kim K B, "Effect of local chemistry, structure and length scale of heterogeneities on the mechanical properties of a Ti45Cu40Ni7.5Zr5Sn2.5 bulk metallic glass", Philos. Mag. Lett, 88, pp.75~81 (2008)
- C. H. Lee, "Investigation of the Mechanical Properties of Ti-Fe-Sn Ultrafine Eutectic Composites by Dendrite Phase Selection", Metals and Materials International, 20(3), pp.417~421 (2014), 대한금속·재료학회[DOI]
- Lee J K, "Plasticity in bulk metallic glass composites containing dual amorphous phases", Mater. Sci. Forum, 539, pp.2026~2030 (2007)
- Lee S W, "Micro-to-nanoscale deformation mechanisms of a bimodal ultrafine eutectic composite", Sci. Rep, 4, pp.6500~ (2014)
- Park J M, "Designing Zr-Cu-Co-Al bulk metallic glasses with phase separation mediated plasticity", Metall. Mater. Trans. A, 43, pp.2598~2603 (2012)
- Pauly S, "Transformationmediated ductility in CuZr-based bulk metallic glasses", Nat. Mater, 9, pp.473~477 (2010)
- Pauly S, "Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites", Acta Mater, 57, pp.5445~5453 (2009)
- Qiao J W, "Tensile deformation micromechanisms for bulk metallic glass matrix composites: from work-hardening to softening", Acta Mater, 59, pp.4126~4137 (2011)
- Schuh C A, "Mechanical behavior of amorphous alloys", Acta Mater, 55, pp.4067~4109 (2007)
- Spaepen F, "A microscopic mechanism for steady state inhomogeneous flow in metallic glasses", Acta Metall, 25, pp.407~415 (1977)
- Telford M, "The case for bulk metallic glass", Mater. Today, 7, pp.36~43 (2004)
- Tian L, "Approaching the ideal elastic limit of metallic glasses", Nature Comm, 3, pp.609~ (2011)
- Wu Y, "Bulk metallic glass composites with transformation-mediated work-hardening and ductility", Adv. Mater, 22, pp.2770~2773 (2010)
- Zhang Z, "Theoretical calculation of the strain-hardening exponent and the strength coefficient of metallic materials", J. Mater. Eng. Perf, 15, pp.19~22 (2006)
- Zhang Z Y, "Effects of Sn addition on phase formation and mechanical properties of TiCu-based bulk metallic glass composites", Intermetallics, 42, pp.68~76 (2013)
- Zhu Z, "Ta-particulate reinforced Zr-based bulk metallic glass matrix composite with tensile plasticity", Scripta Mater, 62, pp.278~281 (2010)