Microstructural, mechanical, and electrochemical analysis of carbon doped AISI carbon steels

키워드

참고문헌 (54)

1. Renato Altobelli Antunes, "Characterization of corrosion products formed on steels in the first months of atmospheric exposure", Materials Research, 6(3), pp.403~408 (2003), FapUNIFESP (SciELO)[DOI]
2. S. Basak, "Handbook of Conducting Polymers" (1998), Marcel Dekker
3. D. Clover, "The influence of microstructure on the corrosion rate of various carbon steels", Journal of Applied Electrochemistry, 35(2), pp.139~149 (2005), Springer Science and Business Media LLC[DOI]
4. B. A. Cots, , The Relationship between Structure and Mechanical Properties of Metals NPL Symposium HMSO, pp.455~456 (2003)
5. A. Dugstad, "Corrosion" (2000), NACE International
6. F. Farelas, "Evolution of dissolution processes at the interface of carbon steel corroding in a CO2 environment studied by EIS", Corrosion Science, 52(2), pp.509~517 (2010), Elsevier BV[DOI]
7. M. Akmalhakim Mohd Fauzi, "In Vitro Microstructure, Mechanical Properties and Corrosion Behaviour of Low, Medium and High Carbon Steel Under Different Heat Treatments", Journal of Bio- and Tribo-Corrosion, 5(2), pp.37~ (2019), Springer Science and Business Media LLC[DOI]
8. M. G. Fontana, "Corrosion Engineering" (1986), McGraw Hill
9. Tammie L. Gerke, "Physiochemical characterization of five iron tubercles from a single drinking water distribution system: Possible new insights on their formation and growth", Corrosion Science, 50(7), pp.2030~2039 (2008), Elsevier BV[DOI]
10. Thomas Gheno, "Carburisation of ferritic Fe–Cr alloys by low carbon activity gases", Corrosion Science, 53(9), pp.2767~2777 (2011), Elsevier BV[DOI]
11. E. Gulbrandsen, "Corrosion" (2000), NACE International
12. Jia Guo, "Effect of carbon content on mechanical properties and weather resistance of high performance bridge steels", Journal of Iron and Steel Research International, 16(6), pp.63~69 (2009), Springer Science and Business Media LLC[DOI]
13. Jia Guo, "Influence of carbon content and microstructure on corrosion behaviour of low alloy steels in a Cl− containing environment", Corrosion Science, 51(2), pp.242~251 (2009), Elsevier BV[DOI]
14. R. John, "Corrosion" (1998), NACE International
15. 강전연, "Effect of tungsten on the oxidation of alumina-forming austenitic stainless steel", Applied Microscopy, 49(6), pp.1~10 (2019), 한국현미경학회[DOI]
16. Singon Kang, "Prediction of Bainite Start Temperature in Alloy Steels with Different Grain Sizes", ISIJ International, 54(4), pp.997~999 (2014), Iron and Steel Institute of Japan[DOI]
17. Prvan Kumar Katiyar, "Comparative Corrosion Behavior of Five Microstructures (Pearlite, Bainite, Spheroidized, Martensite, and Tempered Martensite) Made from a High Carbon Steel", Metallurgical and Materials Transactions A, 50(3), pp.1489~1501 (2019), Springer Science and Business Media LLC[DOI]
18. M. B. Kermani, "Carbon Dioxide Corrosion in Oil and Gas Production—A Compendium", CORROSION, 59(8), pp.659~683 (2003), NACE International[DOI]
19. Jung Gi Kim, "Effect of the Difference in Strength of Hard and Soft Components on the Synergetic Strengthening of Layered Materials", Metals and Materials International, 27(2), pp.376~383 (2021), 대한금속·재료학회[DOI]
20. Jung Gi Kim, "Effects of Cell Network Structure on the Strength of Additively Manufactured Stainless Steels", Metals and Materials International, 27(8), pp.2614~2622 (2021), 대한금속·재료학회[DOI]
21. J. -G. Kim, , Met. Mater. Int, 11, pp.3~ (2005)
22. J. W. Kim, , Met. Mater. Int, 11, pp.2~ (2005)
23. Yongju Kim, "Importance of Microstructural Features in Bimodal Structure–Property Linkage", Metals and Materials International, 29(1), pp.53~58 (2023), 대한금속·재료학회[DOI]
24. Ko Kwang Kyu, "Quantitative analysis of retained austenite in Nb added Fe-based alloy", Applied Microscopy, 52(1), pp.1~10 (2022), 한국현미경학회[DOI]
25. NACE International Impact Report, "G. Koch", ~ (2013)
26. A.K. Kuruvilla, , AMPITIAC Newsletter, 2(2), pp.1~ (1998)
27. 이동복, "Corrosion of Low Carbon Steel Weldments at 600-800 °C in N2", H2S, Metals and Materials International, pp.2014, 20(2)[DOI]
28. Koo Hyun Lee, "A study of the corrosion properties of plasma nitrocarburized and oxidized AISI 1020 steels", Metals and Materials International, 8(4), pp.381~385 (2002), Springer Science and Business Media LLC[DOI]
29. Manjie Li, "Characteristics of iron corrosion scales and water quality variations in drinking water distribution systems of different pipe materials", Water Research, 106, pp.593~603 (2016), Elsevier BV[DOI]
30. Manjie Li, "Characteristics of iron corrosion scales and water quality variations in drinking water distribution systems of different pipe materials", Water Research, 106, pp.593~603 (2016), Elsevier BV[DOI]
31. Darren A. Lytle, "Accumulation of Arsenic in Drinking Water Distribution Systems", Environmental Science & Technology, 38(20), pp.5365~5372 (2004), American Chemical Society (ACS)[DOI]
32. J.E Maslar, "In situ Raman spectroscopic investigation of chromium surfaces under hydrothermal conditions", Applied Surface Science, 180(1-2), pp.102~118 (2001), Elsevier BV[DOI]
33. S. Nešić, "Carbon Dioxide Corrosion of Carbon Steel in Two-Phase Flow", CORROSION, 50(9), pp.717~727 (1994), NACE International[DOI]
34. S. Nesic, "An Electrochemical Model for Prediction of Corrosion of Mild Steel in Aqueous Carbon Dioxide Solutions", CORROSION, 52(4), pp.280~294 (1996), NACE International[DOI]
35. C. A. Palacios, "CO<sub>2<", sub>Corrosion of N-80 Steel at 71°C in a Two-Phase Flow System, 1993, pp.49(8), 686~693[DOI]
36. Ching-Yu Peng, "Characterization of elemental and structural composition of corrosion scales and deposits formed in drinking water distribution systems", Water Research, 44(15), pp.4570~4580 (2010), Elsevier BV[DOI]
37. V. G. Pleshivtsev, "Effect of carbon content and stressed state on the corrosion rate of pipe steel in heating systems", Metallurgist, 53(7-8), pp.502~505 (2009), Springer Science and Business Media LLC[DOI]
38. H. R. Riazi, "Influence of Ultraviolet Light Irradiation on the Corrosion Behavior of Carbon Steel AISI 1015", Metals and Materials International, 19(2), pp.217~224 (2013), 대한금속·재료학회[DOI]
39. P.R. Roberge, "Handbook of Corrosion Engineering" (2012), McGraw-Hill Education
40. P. Sarin, "Iron release from corroded iron pipes in drinking water distribution systems: effect of dissolved oxygen", Water Research, 38(5), pp.1259~1269 (2004), Elsevier BV[DOI]
41. P. Sarin, "Iron Corrosion Scales: Model for Scale Growth, Iron Release, and Colored Water Formation", Journal of Environmental Engineering, 130(4), pp.364~373 (2004), American Society of Civil Engineers (ASCE)[DOI]
42. G. Schmitt, "Corrosion" (2006), NACE
43. Michael R. Schock, "Occurrence of Contaminant Accumulation in Lead Pipe Scales from Domestic Drinking-Water Distribution Systems", Environmental Science &amp; Technology, 42(12), pp.4285~4291 (2008), American Chemical Society (ACS)[DOI]
44. H. Takabe, "Corrosion" (2001), NACE
45. Zhijian Tang, "Characteristics of iron corrosion scales established under blending of ground, surface, and saline waters and their impacts on iron release in the pipe distribution system", Corrosion Science, 48(2), pp.322~342 (2006), Elsevier BV[DOI]
46. Olli H. Tuovinen, "Bacterial, chemical, and mineralogical characteristics of tubercles in distribution pipelines", Journal - American Water Works Association, 72(11), pp.626~635 (1980), Wiley[DOI]
47. M. Ueda, "Corrosion" (1999), NACE International
48. H. H. Uhling, "Corrosion and Corrosion Control" (1985), Wiley
49. C. Waard, "Corrosion" (1995), NACE International
50. Hong Wang, "Effect of Disinfectant, Water Age, and Pipe Materials on Bacterial and Eukaryotic Community Structure in Drinking Water Biofilm", Environmental Science &amp; Technology, 48(3), pp.1426~1435 (2014), American Chemical Society (ACS)[DOI]
51. Kui Xiao, "Effect of Concentrations of Fe2+ and Fe3+ on the Corrosion Behavior of Carbon Steel in Cl− and SO42− Aqueous Environments", Metals and Materials International, 27(8), pp.2623~2633 (2021), 대한금속·재료학회[DOI]
52. Fan Yang, "Morphological and physicochemical characteristics of iron corrosion scales formed under different water source histories in a drinking water distribution system", Water Research, 46(16), pp.5423~5433 (2012), Elsevier BV[DOI]
53. Fan Yang, "Morphological and physicochemical characteristics of iron corrosion scales formed under different water source histories in a drinking water distribution system", Water Research, 46(16), pp.5423~5433 (2012), Elsevier BV[DOI]
54. Yong Cui, "Characterization of corrosion scale formed on stainless steel delivery pipe for reclaimed water treatment", Water Research, 88, pp.816~825 (2016), Elsevier BV[DOI]

관련 논문AI추천