Effect of Heat Treatment Conditions on Corrosion and Hydrogen Diffusion Behaviors of Ultra-Strong Steel Used for Automotive Applications
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The purpose of this study was to examine the influence of conditions for quenching and/or tempering on the corrosion and hydrogen diffusion behavior of ultra-strong automotive steel in terms of the localized plastic strain related to the dislocation density, and the precipitation of iron carbide. In this study, a range of analytical and experimental methods were deployed, such as field emission-scanning electron microscopy, electron back scatter diffraction, electrochemical permeation technique, slow-strain rate test (SSRT), and electrochemical polarization test. The results showed that the hydrogen diffusion parameters involving the diffusion kinetics and hydrogen solubility, obtained from the permeation experiment, could not be directly indicative of the resistance to hydrogen embrittlement (HE) occurring under the condition with low hydrogen concentration. The SSRT results showed that the partitioning process, leading to decrease in localized plastic strain and dislocation density in the sample, results in a high resistance to HE-induced by aqueous corrosion. Conversely, coarse iron carbide, precipitated during heat treatment, weakened the long-term corrosion resistance. This can also be a controlling factor for the development of ultra-strong steel with superior corrosion and HE resistance.
Abstract
The purpose of this study was to examine the influence of conditions for quenching and/or tempering on the corrosion and hydrogen diffusion behavior of ultra-strong automotive steel in terms of the localized plastic strain related to the dislocation density, and the precipitation of iron carbide. In this study, a range of analytical and experimental methods were deployed, such as field emission-scanning electron microscopy, electron back scatter diffraction, electrochemical permeation technique, slow-strain rate test (SSRT), and electrochemical polarization test. The results showed that the hydrogen diffusion parameters involving the diffusion kinetics and hydrogen solubility, obtained from the permeation experiment, could not be directly indicative of the resistance to hydrogen embrittlement (HE) occurring under the condition with low hydrogen concentration. The SSRT results showed that the partitioning process, leading to decrease in localized plastic strain and dislocation density in the sample, results in a high resistance to HE-induced by aqueous corrosion. Conversely, coarse iron carbide, precipitated during heat treatment, weakened the long-term corrosion resistance. This can also be a controlling factor for the development of ultra-strong steel with superior corrosion and HE resistance.
참고문헌 (39)
- J. Bian, , Adv. Manuf, 3, pp.27~ (2015)
- 황은혜, "탄소함량이 자동차용 초고강도 철강소재의 부식 및 수소 확산 거동에 미치는 영향", 대한금속·재료학회지, 56(8), pp.570~579 (2018), 대한금속·재료학회[DOI]
- "M. Tetsuya", JFE, 38~, pp.JFE Technical Report, 4 (2004)
- J. Yang, , Mater. Sci. Eng. A, 665, pp.76~ (2016)
- M. C. Jo, , Mater. Sci. Eng. A, 707, pp.65~ (2017)
- S. Takagi, , ISIJ Int, 52, pp.316~ (2012)
- H. Karbasian, , J. Mater. Process. Technol, 210, pp.2103~ (2010)
- A. R. Ranji A. H., , J. Nav. Archit. Mar. Eng, 7, pp.93~ (2010)
- H. K. D. H. Bhadeshia, , ISIJ Int, 56, pp.24~ (2016)
- N. Staicopolus, , J. Electrochem. Soc, 110, pp.1121~ (1963)
- F. Farelas, , Corros. Sci, 52, pp.509~ (2010)
- S. Jayabal, , J. Mater. Chem. A, 5, pp.47~ (2017)
- A. M. Mebel, , J. Phys. Chem. A, 105, pp.7460~ (2001)
- M. Wasim, , J. Mater. Civ. Eng, 31, pp.04018349~04018341 (2019)
- M. Cabrini, , Metals, 8, pp.158~ (2018)
- J. Cwiek, , J. Achiev. Mater. Manuf. Eng, 37, pp.193~ (2009)
- W. Hui, , Mater. Sci. Eng. A, 674, pp.615~ (2016)
- J. Zhao, , Corros. Sci, 82, pp.380~ (2014)
- M. Koyama, , Int. J. Hydrogen Energ, 42, pp.12706~ (2017)
- S. A. Mujahid, , Acta. Metall. Mater, 40, pp.389~ (1992)
- "ISO 17081:2004 (E), Method of Measurement of Hydrogen Permeation and Determination of Hydrogen Uptake and Transport in Metals by an Electrochemical Technique", ISO, ~ (2004)
- S. J. Kim, , Int. J. Hydrogen Energ, 43, pp.17912~ (2018)
- "ASTM G129, Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking", ~ (2013)
- J. Krawczyk, , J. Microsc, 237, pp.411~ (2010)
- Y. Wang, , J. Phys. IV France, 120, pp.103~ (2004)
- K. H. Jack, , JISI, 169, pp.26~ (1951)
- Y. Ohmori, , Autumn Meeting of the Japan Institute of Metals, 12, pp.170~ (1971)
- P. J. Konijnenberg, , Acta Mater, 99, pp.402~ (2015)
- A. Adrover, , J. Alloy. Comp, 358, pp.268~ (2003)
- S. J. Kim, , J. Electrochem. Soc, 161, pp.173~ (2014)
- H. K. D. H. Bhadeshia, , ISIJ Int, 56, pp.24~ (2016)
- G. W. Hong, , J. Mater. Sci, 18, pp.271~ (1983)
- G. W. Hong, , Metall. Trans. A, 14, pp.156~ (1983)
- 박진성, "템퍼링 조건이 마르텐사이트계 고강도강의 수소확산거동에 미치는 영향", CORROSION SCIENCE AND TECHNOLOGY, 17(5), pp.242~248 (2018), 한국부식방식학회[DOI]
- E. Serra, , J. Nucl. Mater, 245, pp.108~ (1997)
- B. D. Craig, , Acta Metall, 25, pp.1027~ (1977)
- S. J. Kim, , npj Mater. Degrad, 3, pp.1~ (2019)
- J. W. Mullin, "Crystallization" (1993), Oxford press
- Y. S. Kim, , Metals, 7, pp.182~ (2017)