Microstructure analysis of 8 μm electrolytic Cu foil in plane view using EBSD and TEM
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
With the lightening of the mobile devices, thinning of electrolytic copper foil, which is mainly used as an anode collection of lithium secondary batteries, is needed. As the copper foil becomes ultrathin, mechanical properties such as deterioration of elongation rate and tear phenomenon are occurring, which is closely related to microstructure. However, there is a problem that it is not easy to prepare and observe specimens in the analysis of the microstructure of ultrathin copper foil. In this study, electron backscatter diffraction (EBSD) specimens were fabricated using only mechanical polishing to analyze the microstructure of 8 μm thick electrolytic copper foil in plane view. In addition, EBSD maps and transmission electron microscopy (TEM) images were compared and analyzed to find the optimal cleanup technique for properly correcting errors in EBSD maps.
Abstract
With the lightening of the mobile devices, thinning of electrolytic copper foil, which is mainly used as an anode collection of lithium secondary batteries, is needed. As the copper foil becomes ultrathin, mechanical properties such as deterioration of elongation rate and tear phenomenon are occurring, which is closely related to microstructure. However, there is a problem that it is not easy to prepare and observe specimens in the analysis of the microstructure of ultrathin copper foil. In this study, electron backscatter diffraction (EBSD) specimens were fabricated using only mechanical polishing to analyze the microstructure of 8 μm thick electrolytic copper foil in plane view. In addition, EBSD maps and transmission electron microscopy (TEM) images were compared and analyzed to find the optimal cleanup technique for properly correcting errors in EBSD maps.
참고문헌 (21)
- A. Ibanez, "Mechanical and structural properties of electrodeposited copper and their relation with the electrodeposition parameters", Surf. Coat. Technol, b1, pp.7~16 (2005)
- A. J. Schwartz, "Electron backscatter diffraction in materials science" (2009), Springer
- E.D.A.X., "Insight", Step Size Selection for EBSD Mapping, 16(1), pp.3~ (2018)
- F.J. Humphreys, "Characterisation of fine-scale microstructures by electron backscatter diffraction(EBSD)", Scr. Mater, 51, pp.771~776 (2004)
- G. Nolze, "Image distortions in SEM and their influences on EBSD measurements", Ultramicroscopy, 107, pp.172~183 (2007)
- 강주희, "표면처리가 어려운 금속재료의 EBSD 분석을 위한 시편 준비", 대한금속·재료학회지, 48(8), pp.730~740 (2010), 대한금속·재료학회
- J.K. Park, "Principle and applications of lithium secondarybatteries" (2012), Wiley-VCH
- J. P. Pender, "Electrode degradation in lithium-ion batteries", ACS Nano, 14, pp.1243~1295 (2020)
- K. D. Kepler, "Copper-tin anodes for rechargeable lithium batteries: an example of the matrix effect in an intermetallic system", J. Power Sources, 81–82, pp.383~387 (1999)
- M. M. Nowell, "EBSD sample preparation: Techniques, Tips, and Tricks", Microsc. Microanal, 11(S02), pp.504~505 (2005)
- M. N. Obrovac, "Alloy negative electrodes for Li-ion batteries", Chem. Rev, 114, pp.11444~11502 (2014)
- R. Borah, "On battery materials and methods", Mater. Today Adv, 6, pp.1000046~ (2020)
- 김수현, "금속 미세조직의 3차원 이미지 관찰을 위한 순차적 박리 및 재구성 기술", 대한금속·재료학회지, 54(9), pp.698~710 (2016), 대한금속·재료학회[DOI]
- S. I. Wright, "Automatic analysis of electron backscatter diffraction patterns", Metall. Trans. A, 23, pp.759~767 (1992)
- S. I. Wright, "EBSD image quality mapping", Microsc. Microanal, 12(1), pp.72~84 (2006)
- S. I. Wright, "Introduction and comparison of new EBSD post-processing methodologies", Ultramicroscopy, 159, pp.81~94 (2015)
- T. H. Courtney, "Mechanical behavior of materials" (2000), McGraw-Hill
- T. Hatano, "Effect of material processing on fatigue of FPC rolled copper foil", J. Elec. Mater, 29(5), pp.611~616 (2000)
- 우태규, "Effect of Additives on the Elongation and Surface Properties of Copper Foils", Electronic Materials Letters, 9(3), pp.341~345 (2013), 대한금속·재료학회[DOI]
- 우태규, "전해 동박의 표면 형상 및 기계적 물성에 미치는 SPS 첨가제 영향", 대한금속·재료학회지, 54(9), pp.681~687 (2016), 대한금속·재료학회[DOI]
- V. Randle, "Introduction to texture analysis: Macrotexture, microtexture, and orientation mapping" (2010), CRC Press