구조물 및 기기의 내진성능 평가를 위한 고주파수 지진에 의한 원자력발전소의 지진응답 증폭계수
Seismic Response Amplification Factors of Nuclear Power Plants for Seismic Performance Evaluation of Structures and Equipment due to High-frequency Earthquakes
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Analysis of the 2016 Gyeongju earthquake and the 2017 Pohang earthquake showed the characteristics of a typical high-frequency earthquake with many high-frequency components, short time strong motion duration, and large peak ground acceleration relative to the magnitude of the earthquake. Domestic nuclear power plants were designed and evaluated based on NRC's Regulatory Guide 1.60 design response spectrum, which had a great deal of energy in the low-frequency range. Therefore, nuclear power plants should carry out seismic verification and seismic performance evaluation of systems, structures, and components by reflecting the domestic characteristics of earthquakes. In this study, high-frequency amplification factors that can be used for seismic verification and seismic performance evaluation of nuclear power plant systems, structures, and equipment were analyzed. In order to analyze the high-frequency amplification factor, five sets of seismic time history were generated, which were matched with the uniform hazard response spectrum to reflect the characteristics of domestic earthquake motion. The nuclear power plant was subjected to seismic analysis for the construction of the Korean standard nuclear power plant, OPR1000, which is a reactor building, an auxiliary building assembly, a component cooling water heat exchanger building, and an essential service water building. Based on the results of the seismic analysis, a high-frequency amplification factor was derived upon the calculation of the floor response spectrum of the important locations of nuclear power plants. The high-frequency amplification factor can be effectively used for the seismic verification and seismic performance evaluation of electric equipment which are sensitive to high-frequency earthquakes.
Abstract
Analysis of the 2016 Gyeongju earthquake and the 2017 Pohang earthquake showed the characteristics of a typical high-frequency earthquake with many high-frequency components, short time strong motion duration, and large peak ground acceleration relative to the magnitude of the earthquake. Domestic nuclear power plants were designed and evaluated based on NRC's Regulatory Guide 1.60 design response spectrum, which had a great deal of energy in the low-frequency range. Therefore, nuclear power plants should carry out seismic verification and seismic performance evaluation of systems, structures, and components by reflecting the domestic characteristics of earthquakes. In this study, high-frequency amplification factors that can be used for seismic verification and seismic performance evaluation of nuclear power plant systems, structures, and equipment were analyzed. In order to analyze the high-frequency amplification factor, five sets of seismic time history were generated, which were matched with the uniform hazard response spectrum to reflect the characteristics of domestic earthquake motion. The nuclear power plant was subjected to seismic analysis for the construction of the Korean standard nuclear power plant, OPR1000, which is a reactor building, an auxiliary building assembly, a component cooling water heat exchanger building, and an essential service water building. Based on the results of the seismic analysis, a high-frequency amplification factor was derived upon the calculation of the floor response spectrum of the important locations of nuclear power plants. The high-frequency amplification factor can be effectively used for the seismic verification and seismic performance evaluation of electric equipment which are sensitive to high-frequency earthquakes.
참고문헌 (17)
- Korea Meteorological Administration, "Earthquake Notification –2016. 9. 12. 20:37. Official notice", ~ (2016)
- 임승현, "구조물 및 기기의 한계성능 평가를 위한 고진동수 지진특성을 반영한 응답스펙트럼 형상", 한국지진공학회논문집, 24(1), pp.1~8 (2020), 한국지진공학회[DOI]
- Korea Meteorological Administration, "Earthquake Notification –2017. 11. 15. Official notice", ~ (2017)
- 임승현, "포항지진에 대한 원자력발전소 구조물 및 기기의 지진응답분석", 한국지진공학회논문집, 22(3), pp.113~119 (2018), 한국지진공학회[DOI]
- 임승현, "Opendata 기반 포항 및 경주지진에 의한 건물손상 평가", 한국지진공학회논문집, 22(3), pp.121~128 (2018), 한국지진공학회[DOI]
- High Frequency Program, Application Guidance for Functional Confirmation and Fragility Evaluation, "Electric Power Research Institute", ~, pp.EPRI 3002004396 (2015)
- Industry Approach to Severe Accident Policy Implementation, "Electric Power Research Institute", ~, pp.NP-7498 (1991)
- Program on Technology Innovation:The Effects of HighFrequency Ground Motion on Structures, Components, and Equipment in Nuclear Power Plants, "Electric Power Research Institute", ~, pp.EPRI 1015108 (2007)
- US Nuclear Regulatory Commission, "Regulatory Guide 1.60: Design Response Spectra for Seismic Design of Nuclear Power Plants", US NRC, ~ (2014)
- Singh MP, "Seismic Floor Spectra by Mode Acceleration Approach", Journal of Engineering Mechanics, 111(11), pp.1402~1419 (1985)
- Singh MP, "Generation of Seismic Floor Spectra", Journal of Engineering Mechanics, 101(5), pp.593~607 (1975)
- Methodology for Developing Seismic Fragilities, "Reed JW", Electric Power Research Institute, ~, pp.EPRI TR-103959 (1994)
- Probabilistic Seismic Hazard Analysis Procedure and Application for Nuclear Power Plant Sites, "Seo JM", KAERI, ~, pp.KAERI (2012), TR-4633
- Development of Ground Motion Response Spectra Considering Site Amplification Effect, "Seo JM", KAERI, ~, pp.KAERI (2013), TR-5373
- A Study on the Characteristics of Strong Ground Motions in Southern Korea, "Lee JM", KINS, ~, pp.KINS (2002), HR-422
- P-CARES: Probabilistic Computer Analysis for Rapid Evaluation, "US Nuclear Regulatory Commission", 158~, pp.NUREG (2007), CR-6922
- Seismic Fragility and Analysis of Hanul Nuclear Power Plant, "Jacekorea", ~ (2015)