음압격리병동의 건축 비구조요소 내진설계를 위한 전산도구 개발
Development of Computational Tools for Seismic Design of Architectural Components in Negative Pressure Isolation Wards
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Recently, an unprecedented emerging infectious disease has rapidly spread, causing a global shortage of wards. Although various temporary beds have appeared, the supply of wards specializing in infectious diseases is required. Negative pressure isolation wards should maintain their function even after an earthquake. However, the current seismic design standards do not guarantee the negative pressure isolation wards’ operational (OP) performance level. For this reason, some are not included in the design target even though they are non-structural elements that require seismic design. Also, the details of non-structural elements are usually determined during the construction phase. It is often necessary to complete the stability review and reinforcement design for non-structural elements within a short period. Against this background, enhanced performance objectives were set to guarantee the OP non-structural performance level, and a computerized tool was developed to quickly perform the seismic design of non-structural elements in the negative pressure isolation wards. This study created a spreadsheet-based computer tool that reflects the components, installation spacing, and design procedures of non-structural elements. Seismic performance review and design of the example non-structural elements were conducted using the computerized tool. The strength of some components was not sufficient, and it was reinforced. As a result, the time and effort required for strength evaluation, displacement evaluation, and reinforcement design were reduced through computerized tools.
Abstract
Recently, an unprecedented emerging infectious disease has rapidly spread, causing a global shortage of wards. Although various temporary beds have appeared, the supply of wards specializing in infectious diseases is required. Negative pressure isolation wards should maintain their function even after an earthquake. However, the current seismic design standards do not guarantee the negative pressure isolation wards’ operational (OP) performance level. For this reason, some are not included in the design target even though they are non-structural elements that require seismic design. Also, the details of non-structural elements are usually determined during the construction phase. It is often necessary to complete the stability review and reinforcement design for non-structural elements within a short period. Against this background, enhanced performance objectives were set to guarantee the OP non-structural performance level, and a computerized tool was developed to quickly perform the seismic design of non-structural elements in the negative pressure isolation wards. This study created a spreadsheet-based computer tool that reflects the components, installation spacing, and design procedures of non-structural elements. Seismic performance review and design of the example non-structural elements were conducted using the computerized tool. The strength of some components was not sufficient, and it was reinforced. As a result, the time and effort required for strength evaluation, displacement evaluation, and reinforcement design were reduced through computerized tools.
참고문헌 (19)
- "Container that came up with an alternative to hospital beds…“Severely ill patients should never go”"[URL]
- Response Assessment of Non-structural Building Elements, "Taghavi S", Pacific Earthquake Engineering Research Center, ~, pp.Report No. 2003 (2003), 2005
- "KDS 41 10 05. General provisions of Korea building code", Korea Construction Standards Center, ~ (2019)
- "KDS 41 17 00. Seismic building design code", Korea Construction Standards Center, ~ (2019)
- Architectural guidelines for the design of healthcare facilities – focused on general ward, Isolation ward, ICU, Newborn unit, NICU, Dialysis Unit, Surgical Unit, HVAC -, "Korea Institute of Healthcare Architecture", KIHA, ~, pp.Report No. 11-1352000-002445-01 (2018)
- Architectural Institute of Korea, "Non-structural element seismic design examples according to the seismic building design code" (2019), AIK
- Department of Veterans Affairs, "Design guide – Medical", surgical inpatient units & intensive care nursing units, 2011
- Korea Disease Control and Prevention Agency, "Guidelines for operation and management of national hospital treatment beds", KDCA, ~ (2019)
- Chai JF, "Seismic rehabilitation objectives and a simplified seismic evaluation and design programme for medical equipment in hospitals" (2015), Bulletin of the New Zealand society for earthquake engineering
- 김태완, "가속도에 민감한 종합병원 의료 및 기계설비의 내진성능평가", 한국지진공학회논문집, 22(4), pp.235~244 (2018), 한국지진공학회[DOI]
- "KS D 3609. Steel furrings for wall and ceiling in buildings. Korean Standards. c2020", Korean Standards, ~ (2020)
- "SMCS 41 51 10. Light partition installation", Seoul Metropolitan Government Construction Specification, ~ (2018)
- "KCC Gypsum board standard specification"[URL]
- "KDS 41 31 00. Korean steel structure design code", Korea Construction Standards Center, ~ (2019)
- Selvaraj S, "Investigation on sheathing effect and failure modes of gypsum sheathed cold-formed steel wall panels subjected to bending", Structures, 17, pp.87~101 (2019)
- "KS F 3504. Gypsum boards", Korean Standards, ~ (2018)
- Amer S, "In-plane performance of gypsum board partition wall systems subjected to cyclic loadings", Journal of Constructional Steel Research, 124(10), pp.23~36 (2016)
- Shaking test report of light partition wall system, "Seismic Research and Test Center", SESTEC, ~, pp.Report No, 2019D09 (2019)
- McMullin KM, "Seismic damage thresholds for gypsum wallboard partition walls", Journal of Architectural Engineering, 13(1), pp.22~29 (2007)