단자유도 해석모델을 활용한 응답스펙트럼과 지진취약도 곡선과의 관계에 대한 연구
A Study on the Relationship between Response Spectrum and Seismic Fragility Using Single Degree of Freedom System
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In general, the design response spectrum in seismic design codes is based on the mean-plus-one-standard deviation response spectrum to secure high safety. In this study, response spectrum analysis was performed using seismic wave records adopted in domestic horizontal design spectrum development studies, while three response spectra were calculated by combining the mean and standard deviation of the spectra. Seismic wave spectral matching generated seismic wave sets matching each response spectrum. Then, seismic fragility was performed by setting three damage levels using a single-degree-of-freedom system. A correlation analysis was performed using a comparative analysis of the change in the response spectrum and the seismic fragility concerning the three response spectra. Finally, in the case of the response spectrum considering the mean and standard deviation, like the design response spectrum, the earthquake load was relatively high, indicating that conservative design or high safety can be secured.
Abstract
In general, the design response spectrum in seismic design codes is based on the mean-plus-one-standard deviation response spectrum to secure high safety. In this study, response spectrum analysis was performed using seismic wave records adopted in domestic horizontal design spectrum development studies, while three response spectra were calculated by combining the mean and standard deviation of the spectra. Seismic wave spectral matching generated seismic wave sets matching each response spectrum. Then, seismic fragility was performed by setting three damage levels using a single-degree-of-freedom system. A correlation analysis was performed using a comparative analysis of the change in the response spectrum and the seismic fragility concerning the three response spectra. Finally, in the case of the response spectrum considering the mean and standard deviation, like the design response spectrum, the earthquake load was relatively high, indicating that conservative design or high safety can be secured.
참고문헌 (37)
- 조형익, "내진설계기준의 지반분류체계 및 설계응답스펙트럼 개선을 위한 연구 - (I) 데이터베이스 및 지반응답해석", 한국지진공학회논문집, 20(4), pp.235~243 (2016), 한국지진공학회
- 조형익, "내진설계기준의 지반분류체계 및 설계응답스펙트럼 개선을 위한 연구 - (II) 제안", 한국지진공학회논문집, 20(4), pp.245~256 (2016), 한국지진공학회
- 조형익, "내진설계기준의 지반분류체계 및 설계응답스펙트럼 개선을 위한 연구 - (III) 검증", 한국지진공학회논문집, 20(4), pp.257~268 (2016), 한국지진공학회
- 김재관, "국내외 판내부 지진기록을 이용한 한국 표준수평설계스펙트럼의 개발", 한국지진공학회논문집, 20(6), pp.369~378 (2016), 한국지진공학회
- 김재관, "국내외 판내부 지진기록을 이용한 한국 표준수직설계스펙트럼의 개발", 한국지진공학회논문집, 20(6), pp.413~424 (2016), 한국지진공학회
- 김준경, "국내 속도 지반운동을 이용한 수직 응답스펙트럼 특성 분석", 한국방재학회논문집, 12(1), pp.89~95 (2012), 한국방재학회
- 김준경, "국내 관측자료를 이용한 수평 응답스펙트럼 특성 분석", 터널과 지하공간, 20(6), pp.399~407 (2010), 한국암반공학회
- 윤종구, "국내 지반특성에 적합한 지반분류 방법 및 설계응답스펙트럼 개선에 대한 연구 (Ⅲ) 설계응답스펙트럼 개선방법", 한국지진공학회논문집, 10(2), pp.63~71 (2006), 한국지진공학회
- 윤종구, "국내 지반특성에 적합한 지반분류 방법 및 설계응답스펙트럼 개선에 대한 연구 (Ⅱ) 지반분류 개선방법", 한국지진공학회논문집, 10(2), pp.51~62 (2006), 한국지진공학회
- 윤종구, "국내 지반특성에 적합한 지반분류 방법 및 설계응답스펙트럼 개선에 대한 연구 (I) 국내 내진설계기준의 문제점 분석", 한국지진공학회논문집, 10(2), pp.39~50 (2006), 한국지진공학회
- Kori Unit 1 Nuclear Power Plant Stress Test Performance Report, "KHNP", Gyeongju-si, ~ (2015)
- EESK, "The Research of Seismic Design Code (II)", ~ (1997)
- Ministry of the Interior and Safety, "Act on the Preparation for Earthquakes and Volcanic Eruptions" (2009), Ministry of the Interior and Safety
- Ministry of Land Infrastructure and Transport, "Korean Seismic Design Standard (KDS 17 10 00)", Ministry of Land, Infrastructure and Transport, ~ (2018)
- National Emergency Management Agency, "National Seismic Hazard Maps. Public Announcement of National Emergency Management Agency", National Emergency Management Agency, ~ (2013)
- 선창국, "국내 내륙의 설계 지반 운동 결정을 위한 지반 증폭 계수 및 지반 분류 체계 제안", 한국지반공학회논문집, 21(6), pp.101~116 (2005), 한국지반공학회
- 선창국, "서울 평야 지역에 대한 부지 고유의 지진 증폭 특성 평가", 한국지진공학회논문집, 9(4), pp.29~42 (2005), 한국지진공학회
- 선창국, "현장 탄성파시험 자료 종합을 통한 국내 지반지층의 대표 전단파속도 제안", 지질공학, 22(3), pp.293~307 (2012), 대한지질공학회
- Newmark NM, "Seismic Design Spectra for Nuclear Power Plants", Journal of the Power Division, 992, pp.287~303 (1973)
- American Society of Civil Engineers, "Minimum Design Loads and Associated Criteria for Buildings and Other Structures", American Society of Civil Engineers, ~ (2022)
- Ministry of Land Infrastructure Transport, "Korean Building Seismic Design Standard (KDS 41 17 00)", Ministry of Land, Infrastructure and Transport, ~ (2022)
- 꽁시나, "노후도를 고려한 교량의 시스템-수준 지진취약도 평가", 한국전산구조공학회논문집, 35(3), pp.149~158 (2022), 한국전산구조공학회[DOI]
- 김학수, "PSC 상자형교의 지진취약도 곡선에 대한 근거리 및 원거리 지진의 영향", 한국지진공학회논문집, 14(5), pp.53~64 (2010), 한국지진공학회
- Shinozuka M, "Statistical Analysis of Fragility Curves", J Eng Mech, 126(12), pp.12~ (2000)
- Baker JW, "Efficient Analytical Fragility Function Fitting Using Dynamic Structural Analysis", Earthquake Spectra, 31(1), pp.5~ (2015)
- Choi E, "Seismic fragility of typical bridges in moderate seismic zones", Eng Struct, 26(2), pp.187~199 (2004)
- "Domestic Earthquake List"[URL]
- Abrahamson N., "Non-Stationary Spectral Matching", Seismological research letters, 63(1) (1992)
- Al Atik L, "An Improved Method for Nonstationary Spectral Matching", Earthquake Spectra, 26(3), pp.601~617 (2010)
- Montejo LA, "An improved CWT-based algorithm for the generation of spectrum-compatible records", International Journal of Advanced Structural Engineering, 5, pp.26~ (2013)
- Montejo LA, "Response spectral matching of horizontal ground motion components to an orientation-independent spectrum(RotDnn)", Earthquake Spectra, 37(2), pp.1127~1144 (2020)
- Yi S, "Appraisal and mathematical properties of fragility analysis models", The 13th International Conference on Structural Safety and Reliability (ICOSSAR 2021) (2021)
- Vamvatsikos D, "Incremental dynamic analysis", Earthq Eng Struct Dyn, 31(3), pp.491~514 (2002)
- Vamvatsikos D, "Applied Incremental Dynamic Analysis", Earthquake Spectra, 20(2), pp.523~553 (2004)
- Chopra AK, "A Modal Pushover Analysis Procedure to Estimate Seismic Demands for Buildings", PEER 2001, 2001
- Mazzoni S, "OpenSees Command Language Manual", Pacific Earthquake Engineering Research (PEER)Center, University of California, ~
- Barbat AH, "Seismic damage evaluation in urban areas using the capacity spectrum method: Application to Barcelona", Soil Dynamics and Earthquake Engineering, 28(10-11), pp.851~865 (2008)