운전성 유지를 위한 파이프랙의 한계상태와 지진취약도
Limit States and Corresponding Seismic Fragility of a Pipe Rack for Maintaining Operation
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Unlike other facilities, maintaining processes is essential in industrial facilities. Pipe racks, which support pipes of various diameters, are important structures used in industrial facilities. Since the transport process of pipes directly affects the operation of industrial facilities, a fragility curve should be derived based on considering not only the pipe racks' structural safety but also the pipes' transport process. There are several studies where the fragility curves have been determined based on the structural behavior of pipe racks. However, few studies consider the damage criteria of pipes to ensure the transportation process, such as local buckling and tensile failure with surface defects. In this study, an analysis model of a typical straight pipe rack used in domestic industrial facilities is constructed, and incremental dynamic analysis using nonlinear response history analysis is performed to estimate the parameters of the fragility curve by the maximum likelihood estimation. In addition, the pipe rack's structural behavior and the pipe's damage criteria are considered the limit state for the fragility curve. The limit states considered in this paper to evaluate fragility curves are more reasonable to ensure the transportation process of the pipe systems.
Abstract
Unlike other facilities, maintaining processes is essential in industrial facilities. Pipe racks, which support pipes of various diameters, are important structures used in industrial facilities. Since the transport process of pipes directly affects the operation of industrial facilities, a fragility curve should be derived based on considering not only the pipe racks' structural safety but also the pipes' transport process. There are several studies where the fragility curves have been determined based on the structural behavior of pipe racks. However, few studies consider the damage criteria of pipes to ensure the transportation process, such as local buckling and tensile failure with surface defects. In this study, an analysis model of a typical straight pipe rack used in domestic industrial facilities is constructed, and incremental dynamic analysis using nonlinear response history analysis is performed to estimate the parameters of the fragility curve by the maximum likelihood estimation. In addition, the pipe rack's structural behavior and the pipe's damage criteria are considered the limit state for the fragility curve. The limit states considered in this paper to evaluate fragility curves are more reasonable to ensure the transportation process of the pipe systems.
참고문헌 (18)
- American Society of Civil Engineers, "ASCE", SEI 7-16: Minimum Design Loads and Associated Criteria for Buildings and Other Structures, 2018
- Ministry of Land, Infrastructure and Transport, "KDS 41 17 00:Seismic Building Design" (2022)
- 김익현, "산업환경시설의 설계하중과 내진성능목표 개선안", 대한토목학회논문집(국문), 42(6), pp.763~773 (2022), 대한토목학회[DOI]
- Puttatt J, "Sesimic fragility assessment of a pipe rack structure in a petrochemical complex by incremental dynamic analysis", Journal of Structural Engineering（Madras), 47(5), pp.408~415 (2020)
- Kazantzi AK, "Seismic Fragility Assessment of Building-type Structures in Oil Refineries", Bulletin of Earthquake Engineering, 20(12), pp.6853~6879 (2022)
- Luigi DS, "On the seismic fragility of pipe rack-piping system considering soil-structure interaction", Bulletin of Earthquake Engineering, 18, pp.2723~2757 (2020)
- FEMA, "HAZUS Earthquake Model Technical Manual", ~ (2022)
- Canadian Standard Association, "CSA Z662: Oil and Gas Pipeline System", ~ (2019)
- European Committee for Standardization, "Silos, tanks and pipelines, Eurocode 8, part 4, CEN", TC 250, EN 1998-4, 2006
- Korean Gas Safety Corporation, "KGS FS451: Code for facilities, Technology, Inspection and Safety Diagnosis of Pipelines oustide Manufacturing Plants and Supply Station for Wholesale Gas Business", ~ (2017)
- Det Norske Veritas, "DNV-OS-F101: Submarine Pipeline Systems", ~ (2011)
- 김종락, "정적하중을 받는 용접결함부가 인장내력에 미치는 영향", 대한건축학회논문집 구조계, 18(12), pp.59~66 (2002), 대한건축학회
- Cha JY, "Evaluation of Limit State for Pipelines using Strain-Based Design", Master, pp.2014
- Seismic risk of industrial plants: Assessment of a patrochemical pipe rack using incremental dynamic analysis, "Danesi RJ", ~ (2015)
- Korean Agency for Technology and Standard, "KS D 3503: Rolled steels for general structure" (2023)
- Korean Agency for Technology and Standard, "KS D 3632: Carbon steel tubes for building structure", ~ (2019)
- 한민수, "Weighted Latin Hypercube Sampling to Estimate Clearance-to-stop for Probabilistic Design of Seismically Isolated Structures in Nuclear Power Plants", 한국지진공학회논문집, 22(2), pp.63~75 (2018), 한국지진공학회[DOI]
- 신유성, "다양한 손상상태를 반영한 피뢰기 설비의 지진취약도 해석", 한국지진공학회논문집, 18(1), pp.19~28 (2014), 한국지진공학회