지진하중 및 임의의 하중을 받는 배관 시스템에 대한 응답을 추정하기 위한 데이터 기반 디지털 트윈
Data-Driven Digital Twin for Estimating Response of Pipe System Subjected to Seismic Load and Arbitrary Loads
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The importance of Structural Health Monitoring (SHM) in the industry is increasing due to various loads, such as earthquakes and wind, having a significant impact on the performance of structures and equipment. Estimating responses is crucial for the effective health management of these assets. However, using numerous sensors in facilities and equipment for response estimation causes economic challenges. Additionally, it could require a response from locations where sensors cannot be attached. Digital twin technology has garnered significant attention in the industry to address these challenges. This paper constructs a digital twin system utilizing the Long Short-Term Memory (LSTM) model to estimate responses in a pipe system under simultaneous seismic load and arbitrary loads. The performance of the data-driven digital twin system was verified through a comparative analysis of experimental data, demonstrating that the constructed digital twin system successfully estimated the responses.
Abstract
The importance of Structural Health Monitoring (SHM) in the industry is increasing due to various loads, such as earthquakes and wind, having a significant impact on the performance of structures and equipment. Estimating responses is crucial for the effective health management of these assets. However, using numerous sensors in facilities and equipment for response estimation causes economic challenges. Additionally, it could require a response from locations where sensors cannot be attached. Digital twin technology has garnered significant attention in the industry to address these challenges. This paper constructs a digital twin system utilizing the Long Short-Term Memory (LSTM) model to estimate responses in a pipe system under simultaneous seismic load and arbitrary loads. The performance of the data-driven digital twin system was verified through a comparative analysis of experimental data, demonstrating that the constructed digital twin system successfully estimated the responses.
참고문헌 (23)
- Bordeleau F, "Towards model-driven digital twin engineering: Current opportunities and future challenges", Systems Modelling and Management:First International Conference, ICSMM 2020, pp.43~54 (2020)
- 임성하, "드론기반 도심지 디지털트윈 3차원 모형 구축에 관한 연구", 지적과 국토정보, 50(1), pp.163~180 (2020), 한국국토정보공사[DOI]
- Booyse W, "Deep digital twins for detection, diagnostics and prognostics", Mechanical Systems and Signal Processing, 140, pp.106612~ (2020)
- Kim DC, "Constructing a digital twin system for estimating the response of a piping system subjected to arbitrary loads", Korea Society of Civil Engineers, pp.190~191 (2022)
- Dongchang Kim, "Constructing a digital twin for estimating the response and load of a piping system subjected to seismic and arbitrary loads", Smart Structures and Systems, An International Journal, 31(3), pp.275~281 (2023), 국제구조공학회
- Lo CK, "A review of digital twin in product design and development", Advanced Engineering Informatics, 48, pp.101297~ (2021)
- 김지형, "IoT 플랫폼 기반 디지털 트윈 프로토타입 설계 및 구현", 방송공학회 논문지, 26(4), pp.356~367 (2021), 한국방송∙미디어공학회[DOI]
- Lee SH, "Industry 4.0 and the direction of failure prediction and health management technology (PHM)", Journal of KSNVE, 25(1), pp.22~28 (2015)
- Han SJ, "Real-time virtual sensor technology using model-driven digital twin", Noise ․ Vibration, 31(1), pp.4~11 (2021)
- Tao F, "Digital twindriven product design, manufacturing and service with big data", The International Journal of Advanced Manufacturing Technology, 94, pp.3563~3576 (2018)
- Wang B, "Multi-physics-resolved digital twin of proton exchange membrane fuel cells with a data-driven surrogate model", Energy and AI, 1, pp.100004~ (2020)
- 장상엽, "해상플랫폼 가상현실모델 구현 및 인공지능을 활용한 해저배관 하이드레이트형성 평가", 한국자원공학회지, 58(2), pp.150~160 (2021), 한국자원공학회
- Kang J, "Multimedia knowledge‐based bridge health monitoring using digital twin", Multimedia Tools Appl, 80(26-27), pp.34609~34624 (2021)
- Ellingwood BR, "Probabilistic methods for condition assessment and life prediction of concrete structures in nuclear power plants", Nucl Eng Des, 142(2-3), pp.155~166 (1993)
- Shim C, "Development of a bridge maintenance system for prestressed concrete bridges using 3D digital twin model", Structure and Infrastructure Engineering, 15(10), pp.1319~1332 (2019)
- structural health monitoring, "Architecture", 2018, 78~
- Sony S, "A literature review of nextgeneration smart sensing technology in structural health monitoring", Structural Control and Health Monitoring, 26(3), pp.e2321~ (2019)
- 오승인, "디지털 트윈을 사용한 구조 진동 가상 센서 시스템", 한국소음진동공학회논문집, 30(2), pp.149~160 (2020), 한국소음진동공학회[DOI]
- "1997", 9(8)
- Kim HW, "LSTM Based LKAS yaw rate prediction model using lane information and steering angle", 26(2), pp.279~287 (2018)
- Integrity of structures, systems and components under design and beyond design loads in nuclear power plants: Final report of the project on metallic component margins under high seismic loads (MECOS), "OECD N", ~ (2018)
- "1998", 9(1)
- 전병기, "건물 예측 제어용 LSTM 기반 일사 예측 모델", 한국태양에너지학회 논문집, 39(5), pp.41~52 (2019), 한국태양에너지학회[DOI]