SMIT를 활용한 지진하중을 받는 전단 구조물의 응답모드 특성에 관한 연구
Application Studies on Structural Modal Identification Toolsuite for Seismic Response of Shear Frame Structure
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The improvement in computing systems and sensor technologies devotes to conduct data-driven structural health monitoring algorithms for existing civil infrastructures. Despite of the development of techniques, the uncertainty oriented from the measurement results in the discrepancy to the actual structural parameters and let engineers or decision makers hesitate to adopt such techniques. Many studies have shown that the modal identification results can be affected by the uncertainties due to the applied methods and the types of loading. This paper aims to compare the performance of modal identification methods using Structural Modal Identification Toolsuite (SMIT) which has been developed to facilitate multiple identification methods with a user-friendly designed platform. The data fed into SMIT processes three stages for the comprehensive identification including preprocessing, eigenvalue estimation, and post-processing. The seismic and white noise response for shear frame model was obtained from numerical simulation. The identified modal parameters is compared to the actual modal parameters. In order to improve the quality of coherence in identified modal parameters, several hurdles including modal phase collinearity and extended modal amplitude coherence were introduced. Numerical simulation conducted on the 5 dof shear frame model were used to validate the effectiveness of using these parameters.
Abstract
The improvement in computing systems and sensor technologies devotes to conduct data-driven structural health monitoring algorithms for existing civil infrastructures. Despite of the development of techniques, the uncertainty oriented from the measurement results in the discrepancy to the actual structural parameters and let engineers or decision makers hesitate to adopt such techniques. Many studies have shown that the modal identification results can be affected by the uncertainties due to the applied methods and the types of loading. This paper aims to compare the performance of modal identification methods using Structural Modal Identification Toolsuite (SMIT) which has been developed to facilitate multiple identification methods with a user-friendly designed platform. The data fed into SMIT processes three stages for the comprehensive identification including preprocessing, eigenvalue estimation, and post-processing. The seismic and white noise response for shear frame model was obtained from numerical simulation. The identified modal parameters is compared to the actual modal parameters. In order to improve the quality of coherence in identified modal parameters, several hurdles including modal phase collinearity and extended modal amplitude coherence were introduced. Numerical simulation conducted on the 5 dof shear frame model were used to validate the effectiveness of using these parameters.
참고문헌 (24)
- Chang PC, "Health Monitoring of Civil Infrastructure", Structural Health Monitoring, 2(3), pp.257~267 (2003)[DOI]
- Carden EP, "Vibration Based Condition Monitoring:A Review", Structural Health Monitoring, 3(4), pp.355~377 (2004)[DOI]
- Farrar CR, "An Introduction to Structural Health Monitoring", Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 365(1851), pp.303~315 (2007)[DOI]
- Juang JN, "An Eigensystem Realization Algorithm for Modal Parameter Identification and Model Reduction", Journal of Guidance, Control, and Dynamics, 8(5), pp.620~627 (1985)[DOI]
- Juang JN, "Applied system identification", pp.394~ (1994), Prentice Hall
- Chang M, "Observer Kalman Filter Identification for Output-only Systems using Interactive Structural Modal Identification Toolsuite", Journal of Bridge Engineering, 19(5), pp.04014002~ (2013)
- Juang JN, "An Eigensystem Realization Algorithm using Data Correlations (ERA", DC) for Modal Parameter Identification, 1988, pp.4(1), 5~14
- James GH, "The Natural Excitation Technique (NExT) for Modal Parameter Extraction from Operating Structures", Modal Analysis-the International Journal of Analytical and Experimental Modal Analysis, 10(4), pp.260~ (1995)
- Naganuma T, "ARMA Model for Twodimensional Processes", Journal of Engineering Mechanics, 113(2), pp.234~251 (1987)[DOI]
- Chen CW, "Integrated System Identification and State Estimation for Control Offlexible Space Structures", Journal of Guidance, Control, and Dynamics, 15(1), pp.88~95 (1992)[DOI]
- Pandit SM, "Modal and Spectrum Analysis: Data Dependent Systems in State Space" (1991), Wiley-Interscience
- Van Overschee P, "N4SID: Subspace Algorithms for the Identification of Combined Deterministic-stochastic Systems", Automatica, 30(1), pp.75~93 (1994)[DOI]
- Peeters B, "Reference-based Stochastic Subspace Identification for Output-only Modal Analysis", Mechanical Systems and Signal Processing, 13(6), pp.855~878 (1999)[DOI]
- Flynn EB, "SHMTools: A New Mbeddable Software Package for SHM Applications", Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems. International Society for Optics and Photonics, 7647, pp.764717~ (2010)
- MACEC 3.2: A Matlab Toolbox for Experimental and Operational Modal Analysis, "Reynders E", Leuven University, Belgium Google Scholar, ~ (2011)
- Chang M, "Structural Modal Identification Toolsuite (SMIT)", Lehigh University, ~ (2012)
- Dorvash S, "Effects of Measurement Noise on Modal Parameter Identification", Smart Materials and Structures, 21(6), pp.065008~ (2012)[DOI]
- Chaudhary MT, "System Identification of Two Base-isolated Bridges using Seismic Records", Journal of Structural Engineering, 126(10), pp.1187~1195 (2000)[DOI]
- Smyth AW, "System Identification of the Vincent Thomas Suspension Bridge using Earthquake Records", Earthquake Engineering & Structural Dynamics, 32(3), pp.339~367 (2003)[DOI]
- Beck JL, "Structural Identification using Linear Models and Earthquake Records", Earthquake Engineering & Structural Dynamics, 8(2), pp.145~160 (1980)[DOI]
- Pappa RS, "Consistent-mode Indicator for the Eigensystem Realization Algorithm", Journal of Guidance, Control, and Dynamics, 16(5), pp.852~858 (1993)[DOI]
- Gun Jin Yun, "An Improved Mode Accuracy Indicator for Eigensystem Realization Analysis (ERA) Techniques", KSCE Journal of Civil Engineering, 16(3), pp.377~387 (2012), 대한토목학회
- Stoica P, "Introduction to spectral analysis" (1997), Prentice hall
- Vicario F, "Output‐only Observer", Kalman Filter Identification (O3KID), 2015, pp.22(5), 847~872