휨압축력을 받는 폴리머 콘크리트의 응력-변형 관계와 응력블럭 계수
Stress-Strain Relation and Stress Block Parameters on Flexural Compressive Strength of Polymer Concrete
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Stress-strain relation and stress block parameters of polymer concrete flexural compression members were experimentally investigated. For these purposes, a series of C-shaped polymer concrete specimens subjected to axial compressive load was tested. Based on the test results, we proposed an equation by which the stress-strain relation of polymer concrete can be predicted. In this model, we took account the slope of descending branch beyond the peak stress point of single curve. The proposed equation was numerically integrated to compute the rectangular stress block parameters. Computed was greater than the values prescribed in ACI 318 Code for cement concrete, and was about 0.85 that is similar to the value regulated in the ACI.
Abstract
Stress-strain relation and stress block parameters of polymer concrete flexural compression members were experimentally investigated. For these purposes, a series of C-shaped polymer concrete specimens subjected to axial compressive load was tested. Based on the test results, we proposed an equation by which the stress-strain relation of polymer concrete can be predicted. In this model, we took account the slope of descending branch beyond the peak stress point of single curve. The proposed equation was numerically integrated to compute the rectangular stress block parameters. Computed was greater than the values prescribed in ACI 318 Code for cement concrete, and was about 0.85 that is similar to the value regulated in the ACI.
참고문헌 (28)
- "ACI Committee 318, 2008, Building code requirements for structural concrete (ACI 318-08) and Commentary, An ACI Standard, American Concrete Institute, Detroit", ~ (2008)
- Ahmad, S. H., "Stress-strain curves of concrete confined by spiral reinforcement", ACI Journal Proceedings, 79(6), pp.484~490 (1982)
- Collins, M. P., "Structural design considerations for high strength concrete", Concrete International Design and Construction, 15(5), pp.27~34 (1993)
- Devi, M. S., "Utilization of flyash as filler for unsaturated polyester resin", Journal of Applied Polymer Science, 69(7), pp.1385~1391 (1998)
- Farrell, L. J., "Low resin content polymer concrete product" (1995), United States Patent
- Helal, M. S., "Experimental study of mechanical properties and structural applications of polymer concrete", 박사, pp.1978
- Hognestad, E., "Concrete stress distribution in ultimate strength design", ACI Structural Journal, 52(12), pp.455~480 (1955)
- Hsu, L. S., "Complete stress-strain behavior of high strength concrete under compression", Magazine of Concrete Research, 46, pp.301~312 (1994)
- Kent, D. C., "Flexural members with confined concrete", Journal of the Structural Division, 97(7), pp.1969~1990 (1971)
- Kim, J. K., "Effects of specimen length on flexural compressive strength of concrete", Journal of Korea Concrete Institute, 11(4), pp.63~71 (1999)
- Kim, J. K, "Application of size effect to compressive strength of concrete members", Sādhāna, 27(4), pp.467~484 (2002)
- Knab, L. I., "Flexural behavior of conventionally reinforced polyester concrete beams, Ph.D. Dissertation" (1972), University of Cincinnati
- Knab, L. I., "Shear and flexural behavior of reinforced polyester concrete beams", Journal of the American Concrete Institute, 71(10), pp.493~501 (1974)
- Loft, D. N, "Polymer concrete-reinforced concrete", Publication SP, 40, pp.295~305 (1973)
- Muguruma, H., "Stress-strain curve model for concrete with a wide range of compressive strength", Proceedings of Symposium on Utilization of High Strength Concrete, 통권 : 1, pp.314~321 (1993)
- Ribeiro, M. C. S., "Bending characteristics of resin concretes", Materials Research, 6(2), pp.247~254 (2003)
- Roy, H. E. H., "Ductility of concrete", Proceedings of the International Symposium on Flexural Mechanics of R.C., ASCE-ACI Joint Symposium, pp.213~235 (1964)
- Saatcioglu, M, "Strength and ductility of confined concrete", Journal of Structural Engineering, 118(6), pp.1590~1607 (1992)
- Saenz, L. P., "Discussion of the equation for the stress-strain curve of concrete", ACI Journal, 61(9), pp.1229~1235 (1964)
- San-Jose J. T., "Structural analysis of FRP reinforced polymer concrete material", Construction and Building Materials, 20, pp.971~981 (2005)
- Sargin, M, "Structural concrete and some numerical solutions", Proceedings of the 1968 23rd ACM National Conference, pp.563~574 (1968)
- Sargin, M., "Stress-strain relationships for concrete and the analysis of structural concrete section", 박사, pp.1971
- Sheikh, S. A., "Analytical model for concrete confinement in tied columns", Journal of the Structural Division, 108(12), pp.2703~2722 (1982)
- Sugama, T., "Catalytic effect of a portland cement filler on the cure of water-compatible resorcinol phenol-formaldehyde polymer concrete", Journal of Applied Polymer Science, 26(5), pp.1453~1463 (2003)
- Sun, O. P., "Experimental study on improvement of stiffness of reinforced concrete beam with high-strength material", Annual Report of Concrete Engineering, 15, pp.719~726 (1993)
- Mechanical properties of epoxy and polyester polymers and polymer concrete systems, "Vipulanandan, C", University of Houston, ~, pp.Report No. UHCE 88-13 (1988)
- Vipulanandan, C., "Mechanical behavior of polymer concrete systems", Materials and Structures, 21(4), pp.268~277 (1988)
- Whitney, C. S., "Design of reinforced concrete members under flexure or combined flexure and direct compression", ACI Structural Journal, 33(3), pp.483~498 (1937)