폴리머 콘크리트의 압축 및 휨강도 발현 특성
Compressive and Flexural Strength Development Characteristics of Polymer Concrete
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study experimentally investigated the compressive and flexyral strength development characteristics of polymer concrete using four different type polymeric resins such as unsaturated polyester, vinyl ester, epoxy, and PMMA (polymethyl methacrylate) as binders. The test results show that the average compressive strength of those four different polymer concretes was 88.70 MPa, the average flexural strength was 20.30 MPa. Those test results show that compressive and flexural strengths of polymer concrete were much stronger than compressive and flexural strengths of ordinary Portland cement concrete. In addition, the relative gains of the compressive strength development at the age of 24 hrs compared to the age of 168 hrs were 68.6~88.3 %. Also, the relative gains of the flexural strength development at the age of 24 hrs compared to the age of 168 hrs were 73.8~93.4 %. These test results show that compressive and flexural strengths of each polymer concrete tested in this study were developed at the early age. Moreover, the prediction equations of compressive and flexural strength developments regarding the age were determined. The determined prediction equations could be applied to forecast the compressive and flexural strength developments of polymer concrete investigated in this study because those prediction equations have the high coefficients of correlation. Last, the relations between the compressive strength and the flexural strength of polymer concrete were determined and the flexural/compressive strength ratios were from 1/4 to 1/5. These results show that polymer concretes investigated in this study were appropriate as a flexural member of a concrete structure because the flexural/compressive strength ratios of polymer concrete were much higher than the flexural/compressive strength ratios of Portland cement concrete.
Abstract
This study experimentally investigated the compressive and flexyral strength development characteristics of polymer concrete using four different type polymeric resins such as unsaturated polyester, vinyl ester, epoxy, and PMMA (polymethyl methacrylate) as binders. The test results show that the average compressive strength of those four different polymer concretes was 88.70 MPa, the average flexural strength was 20.30 MPa. Those test results show that compressive and flexural strengths of polymer concrete were much stronger than compressive and flexural strengths of ordinary Portland cement concrete. In addition, the relative gains of the compressive strength development at the age of 24 hrs compared to the age of 168 hrs were 68.6~88.3 %. Also, the relative gains of the flexural strength development at the age of 24 hrs compared to the age of 168 hrs were 73.8~93.4 %. These test results show that compressive and flexural strengths of each polymer concrete tested in this study were developed at the early age. Moreover, the prediction equations of compressive and flexural strength developments regarding the age were determined. The determined prediction equations could be applied to forecast the compressive and flexural strength developments of polymer concrete investigated in this study because those prediction equations have the high coefficients of correlation. Last, the relations between the compressive strength and the flexural strength of polymer concrete were determined and the flexural/compressive strength ratios were from 1/4 to 1/5. These results show that polymer concretes investigated in this study were appropriate as a flexural member of a concrete structure because the flexural/compressive strength ratios of polymer concrete were much higher than the flexural/compressive strength ratios of Portland cement concrete.
참고문헌 (17)
- Chandra, S., "Polymers in Concrete", pp.94~102 (1994), CRC Press, Inc.
- Future trends in polymer concrete, Polymers in Concrete : Advances and Applications, "Fowler, D. W.", 129~143 (1989)
- 현상훈, "양생온도가 폴리머 모르타르의 강도 발현에 미치는 영향", 석사, 지역건설공학, pp.2011
- Sang-Hoon Hyun, "Strength development characteristics of UP-MMA based polymer concrete with different curing temperature", Construction and Building Materials, 37, pp.387~397 (2012), Elsevier BV[DOI]
- Jang, I. Y., "Experimental study on the material characteristics and flexural behavior of ultra high strength concrete", Journal of the Korea Concrete Institute, 4(2), pp.111~118 (1992)
- Meta, P. K., "Concrete: Microstructure, Properties, and Materials", pp.49~84 (1993), McGraw-Hill
- Min, S. H., "Strength development and deformation characteristics of MMA-Modified vinyl ester polymer concrete", M. S., pp.2016
- Neville, A. M., "Properties of concrete", pp.302~311 (1996), John Wiley & Sons, Inc.
- Okada, K., "Fundamental studies on structural use of resin concrete", Proceedings of the 3rd ICPIC, pp.538~552 (1981)
- Omata, F., "Thermal stress and setting shrinkage stress of concrete members repaired by polymer mortar", Proceedings of the 8th ICPIC, pp.113~118 (1995)
- Seung, I. B., "Strength development and deformation characteristics of epoxy polymer concrete", M. S., pp.2015
- 손승완, "양생온도에 따른 MAA혼입 MMA-PMMA 폴리머 콘크리트의 역학적 특성", 석사, 지역건설공학과, pp.2012
- Son, S. W., "Mechanical properties of acrylic polymer concrete containing methacrylic acid as an additive", Journal of Construction and Building Materials, 37, pp.669~679 (2012)[DOI]
- Vipulanandan, C., "Mechanical behavior of polymer concrete system", Materials and Structures, 21(4), pp.268~277 (1988)[DOI]
- Yeon, K. S., "Deformation characteristics of reinforced polymer concrete beams", Journal of the Korean Society of Agricultural Engineers, 30(1), pp.63~72 (1988)
- Yeon, K. S., "Effects of curing temperature on early strength of polymer concrete", Proceedings of the Korea Concrete Institute, 2(2), pp.151~156 (1990)
- Yeon, K. S., "Mechanical properties of high strength polymer concrete using unsaturated polyester resin", Journal of the Korea Concrete Institute, 6(3), pp.131~141 (1994)