UHPCC를 사용한 철근 콘크리트 보의 휨강도 평가
Evaluation on Flexural Capacity of Reinforced Concrete Beams with Ultra-High Performance Cementitious Composites
2
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
This paper concerns the flexural capacity of reinforced concrete beams with ultra-high performance cementitious composites(UHPCC). It was investigated if the existing equations to estimate the flexural capacity of reinforced fiberous concrete beams are applicable with the experiments including lightly reinforced concrete beams. The reinforcing effect when the steel fiber reinforced concrete was used in beams was also estimated. The results showed that the equation to predict the flexural capacity of reinforced steel fiber concrete by ACI 544 committee didn't have a good agreement with the test results and underestimated the flexural capacity in especially lightly reinforced beams with under 1.5% reinforcement ratio. the enhancement of flexural capacity was quite considerable in lightly reinforced beams when the steel fiber reinforced concrete was used. A equation to predict the reinforcing effect of steel fiber in reinforced steel fiber beams was developed. the equation was proposed as a function of both the characteristics of steel fiber and reinforcement ratio.
Abstract
This paper concerns the flexural capacity of reinforced concrete beams with ultra-high performance cementitious composites(UHPCC). It was investigated if the existing equations to estimate the flexural capacity of reinforced fiberous concrete beams are applicable with the experiments including lightly reinforced concrete beams. The reinforcing effect when the steel fiber reinforced concrete was used in beams was also estimated. The results showed that the equation to predict the flexural capacity of reinforced steel fiber concrete by ACI 544 committee didn't have a good agreement with the test results and underestimated the flexural capacity in especially lightly reinforced beams with under 1.5% reinforcement ratio. the enhancement of flexural capacity was quite considerable in lightly reinforced beams when the steel fiber reinforced concrete was used. A equation to predict the reinforcing effect of steel fiber in reinforced steel fiber beams was developed. the equation was proposed as a function of both the characteristics of steel fiber and reinforcement ratio.
참고문헌 (15)
- Heneger, C. H., "of reinforced fibrous concrete beams", Journal of structural engineering ASCE, 102(1), pp.178~188 (1976)
- Craig, R. J., "Flexural Behavior and Design of Reinforced Fibrous Concrete Members", pp.517~563 (1987), Fiber Reinforced Concrete Properties and Application, SP 105-28, American Concrete Institute
- Imam, M., "Shear-moment Analysis of Reinforced High Strength Concrete Beams Containing Steel Fibers", Canadian Journal of Civil Engineering, 22, pp.462~470 (1995)
- Compression Characteristics and Structural Beam Design Analysis of Steel Fiber Reinforced Concrete, "Williamson, G. R.", U. S. Army Construction Engieering research Laboratory, ~, pp.No. M-62 (1973)
- Pearlman, S. L., "Flexural Performance of Reinforced Steel Fiber Concrete Beams", MS, pp.1979
- Swamy, R. N., "Deformation and Ultimate Strength in Flexure of Reinforced Concrete Beams Made with Steel Fiber Concrete", ACI Journal, 78(5), pp.395~405 (1981)
- Hansoun, M. N., "Plastic Hinge in Two-span Reinforced Concrete Beams Containing Steel Fibers", pp.119~139 (1985), Canadian Society for Civil Engineering
- Al-Ta'an, S. A., "Evaluation of Shear Strength of Fiber-reinforced Concrete Beams", Cement and Concrete Composites, 12(2), pp.87~94 (1990)
- Imam, M., "Proportioning and Properties of Very High Strength Concrete with and without Steel Fibers", Proceedings of International Conference ”Concrete 2000“, pp.1693~1705 (1993)
- ACI Committee 544, "Design Considerations for steel fiber reinforced concrete", ACI 544. 4R-88, American Concrete Institute, ~ (1988)
- ACI Committee 318, "Building code requirements for reinforced concrete with commentary (ACI 318-02)", American Concrete Institute, ~ (2002)
- Naaman, A. E., "Statistical Theory of Strength for Fiber Reinforced Concrete", pp.196~ (1972), Massachusetts Institute of Technology
- Fanella, D. A., "Stress -strain properties of Fiber Reinforced Mortar in Compression", ACI Journal, 82(4), pp.475~483 (1985)
- Shin, S. W., "Flexural ductility of ultra-high-strength concrete members", ACI structural journal, 86(4), pp.394~400 (1989)
- Naaman, A. E., "Strain hardening and deflection hardening fiber reinforced cement composites", pp.95~113, High Performance Fiber Reinforced Cement Composites(HPFRCC4)