고유변형도를 경계조건으로 갖는 대형 각(殼) 구조물열변형 해석법 개발
Development of Thermal Distortion Analysis Method on Large Shell Structure Using Inherent Strain as Boundary Condition
0
조회
0
다운로드
19
인용
0
참고문헌
키워드
초록
There are two ways of conventional thermal distortion analysis. One is the thermal elasto-plastic analysis and the other is the equivalent forces method based on inherent strain. The former needs exorbitant analysis time, while the latter cannot obtain results of stress field and it needs much time consumption with loads modeling on curved plates. Such faults in two methods have made difficulties in thermal distortion analysis of a large structure like ship hull. In order to solve them, new kind of thermal distortion analysis method was developed. We devised that the inherent strains was used as direct input factors in forms of boundary conditions. It was embodied by using thermal expansion coefficient in commercial code. We used the pre-calculated inherent strain as thermal expansion coefficient, and endowed nodes with imaginary temperatures. This method was already adopted at hull block welding distortion analysis which was considered as impossible, and gave productive results such as reduction of work time in the dry dock.
Abstract
There are two ways of conventional thermal distortion analysis. One is the thermal elasto-plastic analysis and the other is the equivalent forces method based on inherent strain. The former needs exorbitant analysis time, while the latter cannot obtain results of stress field and it needs much time consumption with loads modeling on curved plates. Such faults in two methods have made difficulties in thermal distortion analysis of a large structure like ship hull. In order to solve them, new kind of thermal distortion analysis method was developed. We devised that the inherent strains was used as direct input factors in forms of boundary conditions. It was embodied by using thermal expansion coefficient in commercial code. We used the pre-calculated inherent strain as thermal expansion coefficient, and endowed nodes with imaginary temperatures. This method was already adopted at hull block welding distortion analysis which was considered as impossible, and gave productive results such as reduction of work time in the dry dock.
참고문헌 (15)
- SYSWORLD® 2006 Release Notes, "ESI Group,", ESI Group, ~, pp.75761 PARIS CEDEX 16 (2006)
- Ha, Y.S., "An Improved Inherent Strain Analysis for Plate Bending by Line Heating Considering Phase Transformation of Steel", International Journal of Offshore and Polar Engineers, 17(2), pp.139~144 (2007)
- 하윤석, "선상가열시 강의 상변태를 고려한개선된 고유변형도 기반의 등가하중법", 대한조선학회 논문집, 41(6), pp.65~74 (2004), 대한조선학회
- Yun Sok Ha, "Analysis of Post-Weld Deformation at the Heat-Affected Zone Using External Forces Based on the Inherent Strain", International Journal of Precision Engineering and Manufacturing, 8(4), pp.56~62 (2007), 한국정밀공학회
- 하윤석, "선상가열시 수냉이 유발하는 막비등 현상을 고려한 판의 변형 예측", 대한조선학회 논문집, 42(5), pp.472~478 (2005), 대한조선학회
- 장창두, "선상가열 판변형 해석을 위한 고유변형도 영역의 결정법", 대한조선학회 논문집, 39(1), pp.9~89 (2002), 대한조선학회
- Jang, C.D., "Prediction of steel plate deformation due to triangle heating using the inherent strain method", Journal of Marine Science Technology, 10(4), pp.211~216 (2005)
- Jang, C.D., "Simulation of Plate Deformation by Triangle Heating Process", Journal of the Society of Naval Architects of Korea, 38(4), pp.66~74 (2001)
- Jang, C.D., "A Study on the Prediction and Control of Welding Deformations of Ship Hull Blocks", Journal of the Society of Naval Architects of Korea, 37(2), pp.127~136 (2000)
- Analysis Method Development for Welding Deformation in Curved Block, "Kang, S.S.", SHIASERC, ~, pp.2006-24-01 (2006)
- 김종태, "고유변형도 기반 열변형부의 후속 하중에 기인한 용접 후 변형 해석", 대한조선학회 논문집, 43(2), pp.220~227 (2006), 대한조선학회
- Ko, D.E., "Realtime Simulation of Deformation due to Line Heating for Automatic Hull Forming System", Journal of the Society of Naval Architects of Korea, 36(4), pp.116~127 (1997)
- 이장현, "유한요소해석과 다변수해석에 의한 선상가열 변형관계식", 대한조선학회 논문집, 39(2), pp.9~80 (2002), 대한조선학회
- Lee, J.S., "Plate Forming Automation System of Steel Plates by Line Heating Method (Ⅰ)", Journal of the Society of Naval Architects of Korea, 31(4), pp.139~146 (1994)
- Masubuchi, K., "Analysis of Welded Structures, Massachusetts Institute of Technology" (1980), Pergamon Press