대형 컨테이너선용 Twist 일체형 타 개발
Study on Design of a Twisted Full-Spade Rudder for a Large Container Ship by the Genetic Algorithm
1
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
This paper describes the design of a full-spade twisted rudder section by using the genetic algorithm based on VLM(Vortex Lattice Method) and panel method. The developed propeller- rudder analysis program has been validated by comparing with experimental data. The developed code has been used for the design of a twisted full-spade rudder especially for finding out optimum section. The optimization has been firstly carried out by the genetic algorithm. The more detail variation of a rudder section has been also conducted by changing section profile in more detail to confirm the most optimum section profile. The developed new twisted rudder has been compared with existing twisted rudder by cavitation testing in the cavitation tunnel at MOERI. It is concluded that the developed twisted rudder has a lower cavity in comparison with existing twisted rudder. The verification of efficiency gain is expected to be carried out through self-propulsion tests in the near future.
Abstract
This paper describes the design of a full-spade twisted rudder section by using the genetic algorithm based on VLM(Vortex Lattice Method) and panel method. The developed propeller- rudder analysis program has been validated by comparing with experimental data. The developed code has been used for the design of a twisted full-spade rudder especially for finding out optimum section. The optimization has been firstly carried out by the genetic algorithm. The more detail variation of a rudder section has been also conducted by changing section profile in more detail to confirm the most optimum section profile. The developed new twisted rudder has been compared with existing twisted rudder by cavitation testing in the cavitation tunnel at MOERI. It is concluded that the developed twisted rudder has a lower cavity in comparison with existing twisted rudder. The verification of efficiency gain is expected to be carried out through self-propulsion tests in the near future.
참고문헌 (8)
- Greely D.S., "Numerical Methods for Propeller Design and Analysis in Steady Flow", SNAME Transaction, 90, pp.415~453 (1982)
- Han J.M., "Analysis of Propeller-rudder Interaction with Rudder Angle", Proceedings, Annual Autumn Meeting of SNAK, pp.206~209 (1999)
- 김문찬, "유전자 알고리즘을 이용한 컨테이너선을 위한 침식예방용 최적방향타 단면 설계", 대한조선학회 논문집, 45(4), pp.403~410 (2008), 대한조선학회
- Lee D.K., "A Study on the Efficient Optimization Method by Coupling Genetic Algorithm and Direct Search Method", Journal of the Society of Naval Architects of Korea, 31(3), pp.12~18 (1994)
- Lee J.T., "A Potential Based Panel Method for the Analysis of Marine Propellers in Steady Flow", 박사, pp.1987
- Lee K.H., "Hybrid Optimization Algorithm Based on the Interface of a Sequential Linear Approximation Method and a Genetic Algorithm", Journal of the Society of Naval Architects of Korea, 34(3), pp.93~101 (1997)
- Molland A.F., "The Free-stram Characteristics of Ship Skeg-rudders", 박사, Department of Ship Science, pp.1981
- Tamashima M., "The Method for Predicting the Performance of Propeller-rudder System with Rudder Angles and Its Application to the Rudder Design", Transaction of the West-Japan Society of Naval Architects(in Japanese), 86, pp.53~76 (1993)