본문 바로가기
KERD
논문KCI 등재

소스공개 라이브러리를 활용한 조선 및 해양 산업용 CFD 코드 개발

CFD Code Development Using Open Source Libraries for Shipbuilding and Marine Engineering Industries

1

조회

0

다운로드

7

인용

0

참고문헌

키워드

주제분류조선공학

초록

The present study explored the possibilities of the applications of open source libraries to shipbuilding and marine engineering industries. A computational fluid dynamics (CFD) code, termed SNUFOAM, was developed and tested for turbulent flow around a ship,free surface flow around a hull, cavitating flow, and vortex shedding dynamics around a cylinder. The results using the developed CFD codes were compared against existing experimental data and solution of commercial CFD codes. SNUFOAM showed the nearly same results as commercial CFD codes and proved to be an alternative to commercial CFD codes for shipbuilding and marine engineering industries.

Abstract

The present study explored the possibilities of the applications of open source libraries to shipbuilding and marine engineering industries. A computational fluid dynamics (CFD) code, termed SNUFOAM, was developed and tested for turbulent flow around a ship,free surface flow around a hull, cavitating flow, and vortex shedding dynamics around a cylinder. The results using the developed CFD codes were compared against existing experimental data and solution of commercial CFD codes. SNUFOAM showed the nearly same results as commercial CFD codes and proved to be an alternative to commercial CFD codes for shipbuilding and marine engineering industries.

참고문헌 (23)

  1. 안병권, "Experimental and numerical studies on super-cavitating flow of axisymmetric cavitators", International Journal of Naval Architecture and Ocean Engineering, 2(1), pp.39~44 (2010), 대한조선학회
  2. Craft, T.J., "Progress in the generalization of wall-functiontreatments", International Journal of Heat and Fluid Flows, 23(2), pp.148~160 (2002)
  3. Choi, J.-E., "Computational predictions of ship-speed performance", Journal of Maritime Science and Technology, 14(3), pp.322~333 (2009)
  4. ITTC Ocean Engineering Committee, "The Ocean Engineering Committee - final report and recommendations to the 26th ITTC", 26th International Towing Tank Conference (2011)
  5. Experiments and calculations on four Wigley hullforms, "Journee, J. M. J.", Delft University., ~, pp.Report No. 909, (1992)
  6. Kunz, "Multi-Phase CFD Analysis of Natural and Ventilated Cavitation about Submerged Bodies", 3rd ASME, 1999, ~
  7. Merkle, C.L., "Computational Modeling of the Dynamics of Sheet Cavitation", 3rd International Symposium on Cavitation (1998)
  8. Newman, J. N., "Marine Hydrodynamics" (1977), The MIT Press
  9. Park, S., "Numerical analysis of super-cavitating flow around a two-dimensional cavitator geometry", 46th Cavitation and Multiphase Flow Forum, ASME-JSME-KSME Joint Fluids Engineering Conference (2011)
  10. 박선호, "2차원 및 축대칭 운동체 주위의 초공동 현상에 대한 수치해석", 한국전산유체공학회지, 16(1), pp.14~21 (2011), 한국전산유체공학회
  11. 박선호, "3차원 비틀어진 날개 주위의 비정상 공동 유동에 대한 수치적 연구", 한국전산유체공학회지, 16(3), pp.37~46 (2011), 한국전산유체공학회
  12. Park, "Program development for the prediction of the ship resistance using OpenFOAM libraries", Annual Autumn Meeting of the Korean Society of Computational Fluids Engineering (2011)
  13. Park, S., "Numerical analysis of cavitating flow with compressibility effects", Annual Autumn Meeting of the Korean Society of Computational Fluids Engineering (2011)
  14. Pope, S. B., "Turbulent flows" (2000), Cambridge University Press
  15. Rusche, H., "Computational fluid dynamics of dispersed two-phase flows at high phase fractrions", 박사, pp.2002
  16. Schnerr, G.H., "Physical and Numerical Modeling of Unsteady Cavitation Dynamics", 4th International Conference on Multiphase Flow (2001)
  17. 서정화, "Flexible CFD meshing strategy for prediction of ship resistance and propulsion performance", International Journal of Naval Architecture and Ocean Engineering, 2(3), pp.139~145 (2010), 대한조선학회
  18. Shin, B.R., "Application of preconditioning method to gas-liquid two-phase flow computations", Journal of Fluids Engineering, 126(4), pp.605~612 (2004)
  19. Shih, "A new k-ε eddy-viscosity model for high Reynolds number turbulent flows-model development and validation", Computers & Fluids, 24(3), pp.227~238 (1995)
  20. Singhal, A.K., "Mathematical Basis and Validation of the Full Cavitation Model", Journal of Fluids Engineering, 124(3), pp.617~624 (2002)
  21. Song, "Numerical simulation of a stationary cylinder in a cross flow from the benchmach study of ITTC ocean engineering committee", 25th Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures (2011)
  22. Weller, H.G., "A tensorial approach to computational continuum mechanics using object-oriented techniques", Computers in Physics, 12(6), pp.620~631 (1998)
  23. Zdravkovich, M. M., "Flow around circular cylinders" (1997), Oxford University Press

관련 논문AI추천

이 간행물의 다른 논문 (12건)