KRISO 대형 캐비테이션터널 시험조건의 함정 모형선반류에 대한 수치해석적 연구
Numerical Analysis of the Wake of a Surface Ship Model Mounted in KRISO Large Cavitation Tunnel
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
The accurate assessment of hull-appendage interaction in the early design stage is important to control the inflow to the propeller plane, which can cause undesirable hydrodynamic effects in terms of cavitation phenomenon. This paper describes a numerical analysis for the flow around a fully appended surface ship model for which KRISO has carried out a model test in the Large Cavitation Tunnel(LCT). This numerical study was performed with the LCT model test in a complementary manner for a good reproduction of the wake distribution of surface ships. A second order accurate finite volume method provided by a commercial computational fluid dynamics(CFD) program was used to solve the governing Reynolds Averaged Navier-Stokes(RANS) equations, where the SST k-ω model was used for turbulence closure. The numerical results were compared to available LCT experimental data for validation. The calculations gave good predictions for the boundary layer profiles on the walls of the empty cavitation tunnel and the wake at the propeller plane of the fully appended hull model in the LCT.
Abstract
The accurate assessment of hull-appendage interaction in the early design stage is important to control the inflow to the propeller plane, which can cause undesirable hydrodynamic effects in terms of cavitation phenomenon. This paper describes a numerical analysis for the flow around a fully appended surface ship model for which KRISO has carried out a model test in the Large Cavitation Tunnel(LCT). This numerical study was performed with the LCT model test in a complementary manner for a good reproduction of the wake distribution of surface ships. A second order accurate finite volume method provided by a commercial computational fluid dynamics(CFD) program was used to solve the governing Reynolds Averaged Navier-Stokes(RANS) equations, where the SST k-ω model was used for turbulence closure. The numerical results were compared to available LCT experimental data for validation. The calculations gave good predictions for the boundary layer profiles on the walls of the empty cavitation tunnel and the wake at the propeller plane of the fully appended hull model in the LCT.
참고문헌 (12)
- "STAR-CCM+ v.10.04 user’s manual" (2015)[URL]
- 최길환, "원유운반선 프로펠러의 모형 및 실선 축척 반류에서의 공동현상과 실선에서 관측된 공동현상의 비교", 대한조선학회 논문집, 48(1), pp.15~22 (2011), 대한조선학회
- Dinham-Peren, T.A., "Use of CFD for hull form and appendage design assessment on an offshore patrol vessel and the identification of a wake focussing rffect", Proceedings of the RINA Marine CFD 2008 (2008)
- 하윤진, "다른 축척비를 가진 KLNG 선형주위 유동장 시뮬레이션", 대한조선학회 논문집, 51(1), pp.8~15 (2014), 대한조선학회
- Hacket, J.P., "Propeller Shaft Strut Design", SNAME Transactions, 107, pp.101~126 (1999)
- 김대혁, "민감도 해석을 통한 선체 부가물이 함정의 조종성능에 미치는 영향 분석", 대한조선학회 논문집, 51(2), pp.154~161 (2014), 대한조선학회
- 이화준, "초기설계 단계에서의 스트럿 설계 고찰", 대한조선학회 논문집, 41(6), pp.114~119 (2004), 대한조선학회
- 이화준, "트윈스케그 적용 대형 로팩스선의 선형개발", 대한조선학회 논문집, 49(6), pp.491~497 (2012), 대한조선학회
- 이호성, "CFD를 이용한 Wake Equalizing Duct의 최적설계", 한국해양공학회지, 25(4), pp.42~47 (2011), 한국해양공학회
- 이연승, "반류제어장치의 선박성능요소에 미치는 영향에 대한 고찰", 대한조선학회 논문집, 46(5), pp.453~459 (2009), 대한조선학회
- Menter, F. R., "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications", AIAA Journal, 32(8), pp.1598~1605 (1994)
- 양해욱, "CFD를 이용한 모형선과 실선 스케일의 반류 비교", 대한조선학회 논문집, 47(2), pp.150~162 (2010), 대한조선학회