CFD를 이용한 KRISO 추진효율 향상 장치(K-duct) 형상 특성에 관한 연구
A Study on the Shape of KRISO Propulsion Efficiency Improvement Devices(K-duct) using CFD
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper is to compare by numerical analysis the flow characteristics and propulsion performance of stern with the shape change of K-duct, a pre-swirl duct developed by Korea Research Institute of Ships & Ocean Engineering (KRISO). First, the characteristics of the propeller and the resistance and self-propulsion before and after the attachment of the K-duct to the ship were verified and the validity of the calculation method was confirmed by comparing this result with the model test results. After that, resistance and self-propulsion calculations were performed by the same numerical method when the K-duct was changed into five different shapes. The efficiency of the other five cases was compared using the delivery horsepower in the model scale and the flow characteristics of the stern were analyzed as the velocity and pressure distributions in the area between the duct end and the propeller plane. For the computation, STAR-CCM +, a general-purpose flow analysis program, was used and the Reynolds Averaged Navier-Stokes (RANS) equations were applied. Rigid Body Motion (RBM) method was used for the propeller rotating motion and SST k-ω turbulence model was applied for the turbulence model. As a result, the tangential velocity of the propeller inflow changed according to the position angle change of the stator, and the pressure of the propeller hub and the cap changes. This regulated the propeller hub vortex. It was confirmed that the vortex of the portion where the fixed blade and the duct meet was reduced by blunt change.
Abstract
This paper is to compare by numerical analysis the flow characteristics and propulsion performance of stern with the shape change of K-duct, a pre-swirl duct developed by Korea Research Institute of Ships & Ocean Engineering (KRISO). First, the characteristics of the propeller and the resistance and self-propulsion before and after the attachment of the K-duct to the ship were verified and the validity of the calculation method was confirmed by comparing this result with the model test results. After that, resistance and self-propulsion calculations were performed by the same numerical method when the K-duct was changed into five different shapes. The efficiency of the other five cases was compared using the delivery horsepower in the model scale and the flow characteristics of the stern were analyzed as the velocity and pressure distributions in the area between the duct end and the propeller plane. For the computation, STAR-CCM +, a general-purpose flow analysis program, was used and the Reynolds Averaged Navier-Stokes (RANS) equations were applied. Rigid Body Motion (RBM) method was used for the propeller rotating motion and SST k-ω turbulence model was applied for the turbulence model. As a result, the tangential velocity of the propeller inflow changed according to the position angle change of the stator, and the pressure of the propeller hub and the cap changes. This regulated the propeller hub vortex. It was confirmed that the vortex of the portion where the fixed blade and the duct meet was reduced by blunt change.
참고문헌 (14)
- CD-adapco, "STAR-CCM+ 10. 04 User’s Manual", ~ (2015)
- 조한나, "CFD를 이용한 180,000 DWT Bulk Carrier용 Pre-Swirl Duct의 파라메트릭 설계", 대한조선학회 논문집, 53(5), pp.343~352 (2016), 대한조선학회
- Dang, J., "An Exploratory Study on the Working Principles of Energy Saving Devices (ESDs)", Symposium on Green Ship Technology (2011)
- 강용덕, "편재된 비대칭형 전류고정날개 추진시스템에 관한 연구", 대한조선학회 논문집, 41(3), pp.13~21 (2004), 대한조선학회
- Kim, M. C., "A study on the asymmetric preswirl stator system", Journal of the Society of Naval Architects of Korea, 30(1), pp.30~44 (1993)
- Lee, J. T., "Development of a preswirl stator-propeller system for improvement of propulsion efficiency : A symmetric stator propulsion system", Journal of the Society of Naval Architects of Korea, 29(4), pp.132~145 (1992)
- Lee, J. T., "Development of a preswirl stator propulsion system for a 300K VLCC", Journal of the Society of Naval Architects of Korea, 31(1), pp.1~13 (1994)
- Menter, F. R., "Two-equation eddy-viscosity turbulence models for engineering applications", Journal of American Institute of Aeronautics and Astronautics, 32(8), pp.1598~1605 (1994)
- Mewis, F., "Mewis duct – new developments, solutions and conclusions", Second International Symposium on Marine Propulsors (2011)
- 박일룡, "자유수면 아래에서 회전하는 프로펠러 주위 유동 수치 해석", 한국해양공학회지, 29(6), pp.427~435 (2015), 한국해양공학회
- 서성부, "CFD를 이용한 KRISO 추진효율 향상 장치(K-duct)의 성능 해석", 한국해양공학회지, 31(3), pp.183~188 (2017), 한국해양공학회[DOI]
- 신현준, "선박용 연료절감장치 Pre-Swirl Duct의 설계 및 평가방법 연구", 대한조선학회 논문집, 50(3), pp.145~152 (2013), 대한조선학회
- 신용진, "제원 및 날개 끝 형상 변화에 따른 비대칭 전류고정날개 성능연구", 한국해양공학회지, 30(6), pp.431~439 (2016), 한국해양공학회
- Yuhai., "Numerical study of energy-saving mechanism of duct on a VLCC with real-geometry propeller", Third International Symposium on Marine Propulsors, SMP’13 (2013)