받음각을 갖는 3차원 캐비테이터에서 발생하는 비축대칭 초공동 유동해석
Numerical Analysis of Non-Axisymmetric Supercavitating Flow Around a Three-Dimensional Cavitator with an Angle of Attack
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, morphological and hydrodynamic characteristics of the non-axisymmetric supercavity generated behind a disk-shaped cavitator were examined. By extending the previous study on axisymmetric supercavitating flow based on a boundary element method, hydrodynamic forces acting under the angle of attack condition of 0 to 30 °and shape characteristics of the supercavity were analyzed. The results revealed that increasing the angle of attack by 30 °reduced the length and width of the cavity by about 15% and the volume by about 40 %. An empirical formula that can quantitatively estimate the geometrical characteristics and change of the cavity was derived. It is expected that this method can be used to evaluate the shape information and force characteristics of the supercavity for the control of the vehicle in a very short time compared to the viscous analysis in the initial design stage of the supercavity underwater vehicle.
Abstract
In this study, morphological and hydrodynamic characteristics of the non-axisymmetric supercavity generated behind a disk-shaped cavitator were examined. By extending the previous study on axisymmetric supercavitating flow based on a boundary element method, hydrodynamic forces acting under the angle of attack condition of 0 to 30 °and shape characteristics of the supercavity were analyzed. The results revealed that increasing the angle of attack by 30 °reduced the length and width of the cavity by about 15% and the volume by about 40 %. An empirical formula that can quantitatively estimate the geometrical characteristics and change of the cavity was derived. It is expected that this method can be used to evaluate the shape information and force characteristics of the supercavity for the control of the vehicle in a very short time compared to the viscous analysis in the initial design stage of the supercavity underwater vehicle.
참고문헌 (11)
- 안병권, "고속 어뢰의 인공 초공동 특성에 대한 실험 연구", 한국군사과학기술학회지, 18(3), pp.300~308 (2015), 한국군사과학기술학회[DOI]
- 안병권, "다중 분사 인공 초월공동에 대한 실험 연구", 대한조선학회 논문집, 58(1), pp.24~31 (2021), 대한조선학회[DOI]
- Garabedian, P. R, "Calculation of axially symmetric cavities and jets", Pacific Journal of Mathematics, 6(4), pp.611~684 (1956)
- 황대규, "VP-BEM 기법을 이용한 초공동 수중 운동체의 형상 및 수심 변화에 따른 수치해석", 한국군사과학기술학회지, 24(2), pp.237~244 (2021), 한국군사과학기술학회
- 정소원, "캐비테이터와 몸체의 조합에 따라 발생하는 인공 초월공동에 대한 실험연구", 대한조선학회 논문집, 56(4), pp.327~334 (2019), 대한조선학회[DOI]
- An experimental study of the hydrodynamic forces acting on a family of cavityproducing conical bodies of revolution inclined to the flow, "Kiceniuk, T.", ~, pp.Report_No_E-12-17 (1954)
- 김지혜, "3차원 축대칭 캐비테이터의 초월공동유동 수치해석", 대한조선학회 논문집, 50(3), pp.160~166 (2013), 대한조선학회
- 이준희, "정적 받음각을 갖는 초공동화 수중체에 대한 실험적 연구", 대한조선학회 논문집, 56(6), pp.541~549 (2019), 대한조선학회[DOI]
- 박현지, "축대칭 수중 운동체의 형상 변화를 고려한 초월공동 수치해석", 대한조선학회 논문집, 55(6), pp.482~489 (2018), 대한조선학회[DOI]
- Artificial supercavitation. physics and calculation, "Semenenko, V.N.", Ukrainian Academy of Sciences Kiev Inst of Hydromechanics, ~ (2001)
- 이종주, "원형 캐비테이터의 받음각에 따른 환기초공동 형상 예측 연구", 한국가시화정보학회지, 19(3), pp.1~9 (2021), 한국가시화정보학회