열수노화 조건에서 레저선박용 탄소섬유강화플라스틱의 강도변화에 관한 실험적 연구
Experimental Study on the Hygrothermal Ageing Effect to the Strength of CFRP Materials for Marine Leisure Boat
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper deals with the experimental study on the hygrothermal ageing effect to the strength of Carbon Fiber Reinforced Plastics (CFRP) materials for marine leisure boat manufactured by vacuum assisted resin infusion method. The experiments performed consist of tensile, flexural and shear tests according to American Society for Testing and Materials (ASTM) and Korean Industrial Standards (KS) test methods. Test coupons are varied from uni-directional(UD, 00, 900), Bi-Directional (BD), and Double-Bias (DB) carbon fiber fabrics in conjunction with epoxy resin. The results of tensile test show that tensile strength reduces significantly while not the same degree of reduction is observed for elasticity modulus with respect to the existence of hygrothermal ageing effect. This implies that the tensile strain induced from external load holds steady values but ultimate strength values change widely under hygrothermal ageing effect. In case of the flexural test, 00 UD shows more strength reduction than 900 UD while BD has reduced values in both flexural strength and elasticity modulus under hygrothermal ageing effect. It is learned that the bending strain induced from external load and ultimate strength values are reduced with respect to hygrothermal ageing effect. Shear test performed only on DB materials, and the results show marginal reduction in ultimate strength and moderate reduction in elasticity modulus. This means that the shear strain varies more than ultimate shear strength with respect to hygrothermal ageing effect. The experiment conducted in this paper clearly demonstrates the differences in material properties of the CFRP for the consideration of hygrothermal ageing effect. Findings obtained from this experimental study can serve as a fundamental input data for the realistic structural responses of marine leisure boat built in CFRP materials.
Abstract
This paper deals with the experimental study on the hygrothermal ageing effect to the strength of Carbon Fiber Reinforced Plastics (CFRP) materials for marine leisure boat manufactured by vacuum assisted resin infusion method. The experiments performed consist of tensile, flexural and shear tests according to American Society for Testing and Materials (ASTM) and Korean Industrial Standards (KS) test methods. Test coupons are varied from uni-directional(UD, 00, 900), Bi-Directional (BD), and Double-Bias (DB) carbon fiber fabrics in conjunction with epoxy resin. The results of tensile test show that tensile strength reduces significantly while not the same degree of reduction is observed for elasticity modulus with respect to the existence of hygrothermal ageing effect. This implies that the tensile strain induced from external load holds steady values but ultimate strength values change widely under hygrothermal ageing effect. In case of the flexural test, 00 UD shows more strength reduction than 900 UD while BD has reduced values in both flexural strength and elasticity modulus under hygrothermal ageing effect. It is learned that the bending strain induced from external load and ultimate strength values are reduced with respect to hygrothermal ageing effect. Shear test performed only on DB materials, and the results show marginal reduction in ultimate strength and moderate reduction in elasticity modulus. This means that the shear strain varies more than ultimate shear strength with respect to hygrothermal ageing effect. The experiment conducted in this paper clearly demonstrates the differences in material properties of the CFRP for the consideration of hygrothermal ageing effect. Findings obtained from this experimental study can serve as a fundamental input data for the realistic structural responses of marine leisure boat built in CFRP materials.
참고문헌 (15)
- "ASTM Standards D790, Standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials", ASTM International, ~ (2017)
- "ASTM Standards D3039, Standard test method for tensile properties of polymer matrix composite materials", ASTM International, ~ (2014)
- "ASTM Standards D3518, Standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a <TEX>${\pm}45^{\circ}$<", TEX> laminate, 2013
- 최정훈, "평직 CFRP 복합재료의 충격잔류강도 평가", 한국정밀공학회지, 29(6), pp.654~663 (2012), 한국정밀공학회[DOI]
- Gibson, A.G., "Composite materials in maritime structures" (1993), Cambridge University Press
- 홍석우, "고온 다습한 환경에 장기간 노출된 CFRP 복합재료의 특성 분석", 대한기계학회논문집 A, 36(8), pp.889~895 (2012), 대한기계학회[DOI]
- 장재욱, "피로누적손상을 이용한 직조 CFRP의 피로수명 예측", 대한조선학회 논문집, 52(3), pp.248~254 (2015), 대한조선학회
- 강민성, "평직 CFRP 적층복합재료의 섬유배열각도에 따른 파괴강도 예측", 대한기계학회논문집 A, 36(8), pp.881~887 (2012), 대한기계학회[DOI]
- 김대욱, "Effect of fabrication processes on mechanical properties of glass fiber reinforced polymer composites for 49 meter (160 foot) recreational yachts", International Journal of Naval Architecture and Ocean Engineering, 2(1), pp.45~56 (2010), 대한조선학회
- 김상영, "Mechanical properties and production quality of hand-layup and vacuum infusion processed hybrid composite materials for GFRP marine structures", International Journal of Naval Architecture and Ocean Engineering, 6(3), pp.723~736 (2014), 대한조선학회
- 김윤해, "흡습 환경 하의 폴리프로필렌", 유리 섬유강화 복합재료의 환경 열화 특성, 2016, pp.30(6), 520~525[DOI]
- "KS D9502, Methods of Neutral Salt Spray Testing", Korean Standards and Certifications, ~ (2014)
- 오대균, "탄소섬유강화복합재료(CFRP) 레저선박선체설계를 위한 ISO 12215와 국제선급규정 비교분석", 한국해양공학회지, 28(1), pp.77~84 (2014), 한국해양공학회
- 박순철, "평직 CFRP 복합재료의 인장강도 및 파괴저항성 특성 평가", 한국마린엔지니어링학회지, 37(8), pp.862~868 (2013), 한국마린엔지니어링학회[DOI]
- Tan, S.C., "Failure criteria for fibrous anisotropic materials", International Journal of Materials in Civil Engineering, 5(2), pp.198~211 (1997), ASCE