염수 환경에 노출된 고강성 탄소/에폭시 복합재의 물성치 변화 연구
An Experimental Study on the Mechanical Properties of High Modulus Carbon-Epoxy Composite in Salt Water Environment
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The main objective of this study is to investigate the effect of salt water on the mechanical properties of a high modulus carbon-epoxy composite. Specimens were made of a carbon-epoxy composite UPN139B of SK Chemical and tested under inplane tension and shear after 0, 1, 3, 6, 9, and 12 months immersion in 3.5% salt water. Acceleration technique such as temperature elevation was not used. The tensile strengths and modulli in fiber and matrix direction did not show any remarkable degradation until 12 months immersion. In contrast to the tensile properties, shear strength and modulus started to gradually decrease up to about 10% of values of dry specimens after 12 months immersion. It was confirmed through the test that the material UPN139B can be an effective material for the shell structures in salt water to resist against the external pressure buckling because of the high fiber directional modulus and corrosion resistance.
Abstract
The main objective of this study is to investigate the effect of salt water on the mechanical properties of a high modulus carbon-epoxy composite. Specimens were made of a carbon-epoxy composite UPN139B of SK Chemical and tested under inplane tension and shear after 0, 1, 3, 6, 9, and 12 months immersion in 3.5% salt water. Acceleration technique such as temperature elevation was not used. The tensile strengths and modulli in fiber and matrix direction did not show any remarkable degradation until 12 months immersion. In contrast to the tensile properties, shear strength and modulus started to gradually decrease up to about 10% of values of dry specimens after 12 months immersion. It was confirmed through the test that the material UPN139B can be an effective material for the shell structures in salt water to resist against the external pressure buckling because of the high fiber directional modulus and corrosion resistance.
참고문헌 (18)
- Kimpara I, "Use of advanced composite materials in marine vehicles", Marine structures, 4(2), pp.117~127 (1991)
- Summerscales J, "Design of marine structures in composite materials", Composite science and technology, 41(1), pp.99~100 (1991)
- Ross, C. T. F, "A conceptual design of an underwater vehicle", Ocean Engineering, 33(16), pp.2087~2104 (2006)
- 서상하, "탄소섬유 강화 복합재료의 수분에 의한 열화 및 회복에 관한 연구", Advanced Composite Materials, 17(3), pp.8~14 (2004), 한국복합재료학회
- 김원근, "적층형 탄소섬유 복합재료의 기계적 성질에 미치는 수분환경의 영향", 한국해양공학회지, 13(4), pp.1225~ (1999)
- 이지훈, "해수가 흡수된 Carbon-Epoxy 적층복합재의 압축특성에 대한 연구-정수압력 영향", 한국해안·해양공학회논문집, 16(4), pp.191~195 (2004), 한국해안,해양공학회
- 윤성호, "염수환경에 노출된 유리섬유직물", 페놀복합재의 내구성 평가, 2005, pp.18(4), 27~34[DOI]
- 문창권, "흡수에 의한 FRP의 내구성에 관한 연구", 한국해양공학회지, 11(2), pp.48~56 (1997)
- 최영호, "수분과 열피로에 의한 복합재료의 물성변화에 대한 연구", 한국섬유공학회지, 37(5), pp.273~279 (2000)
- 김제현, "장시간의 수분흡수가 유리섬유", 에폭시 수지 복합재료의 계면특성에 미치는 영향, 1998, pp.22(3), 468~477
- Judd, N. C. W, "Absorption of water into carbon fibre composite", Society of Chemical Industry, 9(1), pp.36~40 (1977)
- Loos, A. C, "Moisture absorption of graphite-epoxy composites immersed in liquids and in humid air", Journal of composite materials, 13(2), pp.131~147 (1979)
- Joshi, O. K, "The effect of moisture on the shear properties of carbon fiber composites", Composites, 14(3), pp.196~200 (1983)
- Chiou, P, "Effects of seawater absorption on fatigue crack development in carbon", epoxy EDT specimens, 1995, pp.26(12), 869~876
- Miller, P. H, "Effects of moisture absorption and test method on the properties of E-glass", Polyester hull laminates, 2002, pp.36(9), 1065~1078
- 허성화, "염수 환경에 의한 탄소", 에폭시 복합재의 물성치 변화 연구, 2008, pp.21(3), 1~8[DOI]
- "ASTM D3039, “Standard test method for tensile properties of polymer matrix composite materials", ~
- "ASTM D5379, “Standard test method for shear properties of composite materials by the V-Notched beam method”", ~