FRP 기계적 물성을 고려한 복합소재 선체구조 적층판 경량화 설계
Laminate Weight Optimization of Composite Ship Structures based on Experimental Data
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The study aims to improve the previous theory-based algorithm on the lightweight design of laminate structures of a composite ship based on the mechanical properties of fiber, resin, and laminates obtained from experiments. From a case study on using a hydrometer to measure the specific gravity of e-glass fiber woven roving fabric/polyester resin used as the raw material for the hull of a 52 ft composite ship, the equation for calculating the weight of laminate was redefined, and the relationship between decreasing mechanical properties and increasing glass content was determined from the results of material testing according to ASTM D5083 and ASTM D790. After applying these experimental data to the existing algorithm and improving it, a possible laminate design that maximizes the specific strength of the composite material was confirmed. In a case study that applied the existing algorithm based on rules, the optimal lightweight design of composite structures was achieved when the weight fraction of e-glass fiber was increased by 57.5% compared with that in the original design, but the improved algorithm allowed for an increase of only 17.5%.
Abstract
The study aims to improve the previous theory-based algorithm on the lightweight design of laminate structures of a composite ship based on the mechanical properties of fiber, resin, and laminates obtained from experiments. From a case study on using a hydrometer to measure the specific gravity of e-glass fiber woven roving fabric/polyester resin used as the raw material for the hull of a 52 ft composite ship, the equation for calculating the weight of laminate was redefined, and the relationship between decreasing mechanical properties and increasing glass content was determined from the results of material testing according to ASTM D5083 and ASTM D790. After applying these experimental data to the existing algorithm and improving it, a possible laminate design that maximizes the specific strength of the composite material was confirmed. In a case study that applied the existing algorithm based on rules, the optimal lightweight design of composite structures was achieved when the weight fraction of e-glass fiber was increased by 57.5% compared with that in the original design, but the improved algorithm allowed for an increase of only 17.5%.
참고문헌 (24)
- Abdelal, N., "Effect of voids on delamination behavior under static and fatigue Mode I and Mode II", 2013 University of Dayton Stander Symposium (2013), University of Dayton
- American Society for Testing Materials, "Standard test method for tensile properties of reinforced thermosetting plastics using straight-sided specimens. ASTM D5083", ~ (2017)
- American Society for Testing Materials, "Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. ASTM D790", ~ (2017)
- Bolvashenkov, I., "Possible ways to improve the efficiency and competitiveness of modern ships with electric propulsion systems", 2014 IEEE Vehicle Power and Propulsion Conference (VPPC), pp.1~9 (2014)
- 최한규, "선체구조용 FRP 복합재료의 강도 특성", 한국해양공학회지, 27(4), pp.45~54 (2013), 한국해양공학회
- "Application guide to the recreational craft directive 94/25/EC" (2013)[URL]
- Hakim, I., "Porosity effects on interlaminar fracture behavior in carbon fiber-reinforced polymer composites", Materials Sciences and Applications, 8(2), pp.170~187 (2017)
- Han, Z. Q., "A study on material properties of FRP laminates for a composite fishing vessel’s hull", Korean Society for Precision Engineering(KSPE), 2018 KSPE Spring Conference (2018)
- Han, Z. Q., "Laminates weight optimization of FRP fishing vessel using experimental result", Korean Society for Precision Engineering(KSPE), 2018 KSPE Autumn Conference (2018)
- International Organization for Standardization, "Sma l l craft -hull construction and scantlings. ISO 12215-5", ~ (2019)
- 장재원, "GFRP 낚시어선의 선체구조 적층판 분석과 경량화 설계", 한국해양공학회지, 33(6), pp.495~503 (2019), 한국해양공학회[DOI]
- Jeong, S. H., "Simulation of greenhouse gas emissions for environmental impact assessment of small craft", Master, pp.2019
- Jeong, S. H., "Environmental impact evaluation of lightweight FRP laminates for composite ship structures by LCA(Life Cycle Assessment)", Korean Society for Precision Engineering(KSPE), 2018 KSPE Spring Conference (2018)
- Jeong, S. H., "Environmental impact assessment for a small craft considering operational condition", Korean Society of Marine Environment & Safety(KOSOMES), 2018 KOSOMES Autumn Conference (2018)
- Kang, G. M., "A correlation study between carbon fibers weight-fraction and design area for CFRP hull plate", 2014 Annual Spring Meeting of KSOE, pp.23~ (2014), The Korean Society of Ocean Engineering(KSOE)
- 김상영, "Mechanical properties and production quality of hand-layup and vacuum infusion processed hybrid composite materials for GFRP marine structures", International Journal of Naval Architecture and Ocean Engineering, 6(3), pp.723~736 (2014), 대한조선학회
- Lloyd’s Register, "Rules & Regulations for the Classification of Special Service Crafts", ~ (2018)
- "Statistics of registered fishing vessel" (2019)[URL]
- "Marine composite, FRP small craft and eco-friendly" (2019)[URL]
- Oh, D. K., "Li ght-wei ght optimum design of 11m-CFRP high speed craft using laminates weight optimization method", Marine Technology, 5(145), pp.77~84 (2018)
- Oh, D.K, "An Experimental study of design and manufacture for lightweighting composites structures of a GFRP ship", 2015 Annual Spring Meeting of KSOE (2015), The Korean Society of Ocean Engineering(KSOE)
- 오대균, "CFRP 선체소재와 전기추진체계가 소형선박의 경량화에 미치는 효과", 해양환경안전학회지, 24(6), pp.818~824 (2018), 해양환경안전학회[DOI]
- Registro Italiano Navale, "Rules for the Classification of Pleasure Yacht Part B – Hull and Stability", ~ (2015)
- Song, J.H., "Lightweight structure design for composite Yacht with optimum fiber mass content", Proceedings of International SAMPE Technical Conference (2016)