GFRP 낚시어선의 선체구조 적층판 분석과 경량화 설계
Light-weight Optimum Design of Laminate Structures of a GFRP Fishing Vessel
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Approximately 90,000 ships are registered in South Korea, and about 80,000 of these ships are used in domestic shipping. Among these, 84% are small ships, such as a fishing vessels that weigh less than 20 tons and are made mostly of an FRP (Fiber Reinforced Plastics). When this fact is taken into account, the greenhouse gas emissions that are released per ton of a composite vessel are sizeable. In this study, the laminated structures of an FRP fishing vessel, many of which currently are being built in Korea, were analyzed by ISO (International Organization for Standardization) and international design rules, and the structures of the hulls are lightweight with optimum glass fiber mass content as determined by the laminate weight minimization algorithm. As a result, it was confirmed that the laminations of the vessels in accordance with the Korean rule could have 6.4% to approximately 11% more design margin compared to the requirements of ISO and other international rules. And the case study of the application of the laminate weight minimization algorithm showed the possibility of reducing the weight of the hull bottom plating by as much as about 19.32% and by as much as about 18.06% in the overall structure.
Abstract
Approximately 90,000 ships are registered in South Korea, and about 80,000 of these ships are used in domestic shipping. Among these, 84% are small ships, such as a fishing vessels that weigh less than 20 tons and are made mostly of an FRP (Fiber Reinforced Plastics). When this fact is taken into account, the greenhouse gas emissions that are released per ton of a composite vessel are sizeable. In this study, the laminated structures of an FRP fishing vessel, many of which currently are being built in Korea, were analyzed by ISO (International Organization for Standardization) and international design rules, and the structures of the hulls are lightweight with optimum glass fiber mass content as determined by the laminate weight minimization algorithm. As a result, it was confirmed that the laminations of the vessels in accordance with the Korean rule could have 6.4% to approximately 11% more design margin compared to the requirements of ISO and other international rules. And the case study of the application of the laminate weight minimization algorithm showed the possibility of reducing the weight of the hull bottom plating by as much as about 19.32% and by as much as about 18.06% in the overall structure.
참고문헌 (14)
- Han Z. Q., "A Study on Material Properties of FRP Laminates for a Composite Fishing vessel’s Hull", Proceedings of KSPE Spring Conference, pp.113~ (2018)
- ISO, "ISO 12215-5 : Small craft - Hull Construction and Scantlings - Part 5: Design Pressures for Monohulls, Design Stresses, Scantlings Determination", ISO, ~ (2008)
- Joung, T. H., "Latest Progress on the IMO Regulation of the Green House Gas (GHG) Reduction", Bulletin of the Society of Naval Architects of Korea, 55(4), pp.48~54 (2018)
- KOMSA, "Standard of Construction and Equipment for the Less Than 10 Gross Tonnage of Small Fishing Vessels", ~ (2019)
- LR, "Rules & Regulations for the Classification of Special Service Crafts", ~ (2018)
- MOF, "Statistics of Registered fishing Vessel (1992 ~ 2016)", ~ (2016)
- "Marine Composites, FRP Vessels and Eco-friendly Design" (2019)[URL]
- Oh, D. K., "Light-Weight Design of 11 m-CFRP High Speed Craft Using Laminates Weight Optimization Method for Composite Ship Structures", Marine Technology, 5(345), pp.77~84 (2018)
- 오대균, "CFRP 선체소재와 전기추진체계가 소형선박의 경량화에 미치는 효과", 해양환경안전학회지, 24(6), pp.818~824 (2018), 해양환경안전학회[DOI]
- 오대균, "탄소섬유강화복합재료(CFRP) 레저선박선체설계를 위한 ISO 12215와 국제선급규정 비교분석", 한국해양공학회지, 28(1), pp.77~84 (2014), 한국해양공학회
- 오대균, "전과정평가에 의한 복합소재 선체구조 경량화 효과의 환경영향 분석", 한국정밀공학회지, 36(9), pp.875~881 (2019), 한국정밀공학회[DOI]
- RIMS, "Design Drawings of GT 9. 77 Ton Fishing Boat", ~ (2006)
- RINA, "Rules for the Classification of Pleasure Yacht Part B – Hull and Stability", ~ (2013)
- Song, J. H., "Lightweight Structure Design for composite Yacht with Optimum Fiber Mass Content", Proceedings of International SAMPE Symposium and Exhibition (2016), Long Beach CA