공기윤활에 의한 액화천연가스운반선의 마찰저항저감 평가 및 공기 분사부 배치에 대한 연구
Study on the Evaluation of Frictional Drag Reduction by Air Lubrication and the Arrangement of Air Injection Parts for a Liquefied Natural Gas Carrier
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Brake Horse Power (BHP) reduction ratios by air injection to the underside of the hull surface in an actual ship are predicted using an unstructured finite-volume CFD solver and compared with the sea trial results. In addition, air lubrication system installed on the existing vessel is investigated to find a good solution for additional drag reduction. As a results, it is found that the thickness of the air layer should be minimized within a stable range while securing the area covered by the air layer as much as possible. Furthermore, the amount of frictional drag reduced by air injection is found to be independent of surface roughness and still effective on rough surface. Based on the results of this study, it is expected that systematic and reliable air lubrication system can be designed and evaluated using the proposed method.
Abstract
Brake Horse Power (BHP) reduction ratios by air injection to the underside of the hull surface in an actual ship are predicted using an unstructured finite-volume CFD solver and compared with the sea trial results. In addition, air lubrication system installed on the existing vessel is investigated to find a good solution for additional drag reduction. As a results, it is found that the thickness of the air layer should be minimized within a stable range while securing the area covered by the air layer as much as possible. Furthermore, the amount of frictional drag reduced by air injection is found to be independent of surface roughness and still effective on rough surface. Based on the results of this study, it is expected that systematic and reliable air lubrication system can be designed and evaluated using the proposed method.
참고문헌 (16)
- ABS, "Air Lubrication Technology", ~ (2019)
- Antal, S. P, "Analysis of phase distribution in fully developed laminar bubbly two-phase flow", International Journal of Multiphase Flow, 17, pp.635~652 (1991)
- Foreship, "A smoother path to air lubrication - article in 'The Naval Architect'", pp.61~62 (2016), The Royal Institution of Naval Architects
- Kim, H. T., "Study on drag reduction technique with air layer Injection to commercial ships based on computational fluid dynamics simulation", Ph.D, Naval Architecture and Ocean Engineering, pp.2020
- 김희택, "CFD 기법을 활용한 공기층에 의한 마찰항력 감소 현상 연구", 대한조선학회 논문집, 56(4), pp.361~372 (2019), 대한조선학회[DOI]
- Larsson, L, "The principles of naval architecture series : ship resistance and flow" (2010), The Society of Naval Architects and Marine Engineers
- Lee, J. D, "Full scale applications of air lubrication for reduction of ship frictional drag", SNAME Maritime Convention 2017 (2017)
- Mizokami, S, "Experimental study of air lubrication method and verification of effects on actual hull by means of sea trial", Mitsubishi Heavy Industries Technical Review, 47(3), pp.41~47 (2010)
- Naval Ship's Technical Manual, "Waterborne Underwater Hull Cleaning of Navy Ships" (2002), Naval Sea Systems Command
- Nikuradse, J, "Strömungsgesetze in rauhen Rohren", pp.361~ (1933), VDI-Forschungsheft
- Schiller, L, "Uber die grundlegenden Berechnungen bei der Schwerkraftaufbereitung", VDI Zeits, 77(12), pp.318~320 (1933)
- Schlichting, H, "Boundary layer theory" (1979), Springer
- Schultz, M.P, "Frictional drag of antifouling coating system", ASME Journal of Fluids Engineering, 126, pp.1039~1047 (2004)
- Silberschmidt, N, "Silverstream system – air lubrication performance verification and design development", Conference of Shipping in Changing Climate (2016)
- Tanaka, T, "Green technologies featuring the Mitsubishi air lubrication system", 1st World NAOE Forum (2011)
- Tomiyama, A, "Transverse migration of single bubbles in simple shear flows", Chemical Engineering Science, 57, pp.1849~1858 (2002)